Yes, he does - plus, much less cost, much less delay, much more satisfaction, and, from our perspective, much better education and entertainment. But let's go easy with the "wonderful" stuff - don't want his wife to start thinkin' there's no livin' with him! (Small, weak attempt at humor, there. Please excuse it.)
One horn on each side, the tubes will fill the space, paint them white and that will give the illusion of filling the space as well. She looks like a beauty with that tunnel ram on it!!! TWO horns each side, TOO much!
*- Your timelapse makes pulling the motor so easy, and still I got a bit winded.* *- What a confounding job the megaphone fab was. But now you got a jig to do. Wow!*
Love this channel. My soon to be 8 year old is Autistic with auditory sensitivities to music, clapping, loud noises etc. When he hears your voice or the music on this channel, he comes and sits with me to watch. He does this with only you and this channel. Please keep rocking. Thank you for bringing us along.
Love the music in the first half... "Halfass gone funky", LOL!... Seariosly though, I'm totally impressed with your method of making the megaphone. I never would have thought of doing it like that, so simple! Something I thouhgt of while watching you squeezing down the pipe to weld it. Vice Grip, Chain Grips would wrap around evenly.
Brent, you simplify your cleaning up the shop of powder from Fibre glass... do what l do! I put on my dust mark and goggles, the painting mask . Better quality, then l fire up the air compressor, and open your big door! Start at one point in the shop , blow the powder out the door into the lot. I've even used my , leaf blower, which l like much better! Try it, alot easier then dusting ,keep up the good work, jim
Damn! I would have just pulled it and had trans fluid EVERYWHERE!!!! LOL!! You thought ahead and left the u-joint sticking in it....love it! Oh....SICK ASS LIL TRUCK!!
Good job on the bell exhaust, Brent. Can’t wait to see how you incorporate them into your headers. I know they will sound good. Thanks for sharing. 👊😎👍
Very nice job making the megaphone pipes since you had the Speedway ones as a pattern. For future consideration, an old school hot rodder tip for making cheap megaphone pipes was to use early Ford torque tubes. Axle housings would work but be thicker and heavier. You cut out the front tapered portion of the torque tube to whatever length desired and get 2 or 4 exact tapered pipes. Love this ‘37 truck build!
Brent ... the term you're searching for @35:50 is "Tapered Mandrel". Liking your idea to make a permanent Mandrel ... and using an old axle with 1/2" female sockets to allow you to use a ratchet for rotation. But hey, you did an amazing job with the tools (including your Feet) to accomplish the task at hand. Bravo !!! Besides, given the on-going "Freedom Convoy" you probably would have to wait a long while to get another header kit ... GO CANADA !!!
Pablo is such a chill dog. Humans don't deserve the amount of loyalty they give us. "Try locking your wife and your dog out of the house on a cold night, then see which one is still happy to see you in the morning. "
Nice usage of parts laying around ,you look at a flat piece of metal and visualize megaphone style exhaust! I just love metal fab, you can make anything you can visualize!! Great job great content, spot on . Thanks jim
Ingenuity at it's best. Watching you put all those clamps on before welding your last pipe, I thought maybe a few well positioned hose clamps might make the job of closing that gap a little easier. Nice job!
Hi Halfass Kustoms from the D Michigan and Thanks so very much appreciated your time and video informant way to Building your own Headers, hey I've done a lot of Metal work, but never pipe making, watching you is Awesome, and I learn something New every day 🤩✌❤🤲😇🐴
Winner,Winner, save 400 bucks damm,after ur build u might want too make that jig,,make few extra bucks..lol ..lookin great with those 2×4 on top..sweet..
Sorry the shipping is so high for you guys in Canada. BUT you guys can build anything and is is great to watch some one do a HALFASS job and it is perfect. Great job Brent with help from Pablo.
There's so much to like about your videos, I just love watching hot rod stuff and you're showing us how to do it, easy and on the cheap, then there's the music -nice, relaxing and uplifting and there's Pablo ... what a dude!! Keep 'em coming Brent!!!
I've been running a tunnel ram with dual carbs (made/tuned for the tunnel ram) on my BBC street rod since 2014 with absolutely no problems...just more HP hehe. About 30-40 more. People told me I'd have problems with it and it would run/idle bad but it's ran smooth and fast since I put it on. Getting the right carbs made for a tunnel ram and right heads is the key. Brett's little truck is going to haul ass and look cool too!
I like the way you think, I'd just pinch an axle and have a heavy wall master for a form and cap the ends with a half inch square hole for a breaker bar and a cheater pipe for a good twist, you could easily cut a paper pattern for your layout, build a lower roller under your axle for a mass production type of setup 😉
Your ability to work metal ceases to amaze me, but you're going to go deaf in a hurry when you fire-up that 327. Can't imagine you'll make many friends driving that in downtown Winnipeg. 😁
Definitely agree that the single megaphone just didn't look right. I think you nailed the look going with two, can't wait to see the finished product. Dig the valve covers!
Probably made 20 of those for bikes years ago. We used worm gear hose clamps to pull the gaps together. Much easier than using a vise, vise grips, etc.
35 ford pu grills are much thinner (side profile) than your 36 grill, that’s why the 35’s are in such high demand IMO….this build is really fun watching it all come together….
Well the Shop Foreman put you to work with those magic hands to do what you do best and that is to make car parts as needed. You can remove a motor and transmission in an hour, in what would take the backyard mechanic two days. And making those Megaphones exhaust in an hour at first would have taken a backyard mechanic two days just to come with a plan, unless he watch your TH-cam. Pablo is your biggest fan, he watches you almost the entire show. Anyways, great video.
You do a wonderful job of making what you can’t get, it really makes this build a cut above most.
Yes, he does - plus, much less cost, much less delay, much more satisfaction, and, from our perspective, much better education and entertainment. But let's go easy with the "wonderful" stuff - don't want his wife to start thinkin' there's no livin' with him! (Small, weak attempt at humor, there. Please excuse it.)
i just love pablo's enthusiasm, he's definatly not in a hurrry..........unless its a drive
Pablo is the perfect shop dog. Not too much energy, but likes to be in the shop...and go for rides! lol
He sure knows to enjoy the good things in life. :))
One horn on each side, the tubes will fill the space, paint them white and that will give the illusion of filling the space as well. She looks like a beauty with that tunnel ram on it!!! TWO horns each side, TOO much!
Respect for just not buying stuff and actually making it!! Another great video 👍👍
The dog likes a very clean shop to watch you work. And please try to remember he like rides
Thanks for another great video Brent! She's gonna be a beauty when it's finished 🐾🍺
I 100% agree!!!!!!!!!!!!
*- Your timelapse makes pulling the motor so easy, and still I got a bit winded.*
*- What a confounding job the megaphone fab was. But now you got a jig to do. Wow!*
I really like watching you create things, it shows that you can accomplish just about anything!
Love this channel. My soon to be 8 year old is Autistic with auditory sensitivities to music, clapping, loud noises etc. When he hears your voice or the music on this channel, he comes and sits with me to watch. He does this with only you and this channel. Please keep rocking. Thank you for bringing us along.
He might like a keyboard or some sort of musical instrument. God bless you both.
🙏👊😎👍
Those exhaust tubes turned out pretty good when you think outside of the box you can make whatever you want. 👍👍😀🇨🇦🐕🐕
that 2nd flute bend went so smooth
Love the music in the first half... "Halfass gone funky", LOL!... Seariosly though, I'm totally impressed with your method of making the megaphone. I never would have thought of doing it like that, so simple! Something I thouhgt of while watching you squeezing down the pipe to weld it. Vice Grip, Chain Grips would wrap around evenly.
That truck is looking sweet
Genius wrapping!!!
Brent, you simplify your cleaning up the shop of powder from Fibre glass... do what l do! I put on my dust mark and goggles, the painting mask . Better quality, then l fire up the air compressor, and open your big door! Start at one point in the shop , blow the powder out the door into the lot. I've even used my , leaf blower, which l like much better! Try it, alot easier then dusting ,keep up the good work, jim
Damn! I would have just pulled it and had trans fluid EVERYWHERE!!!! LOL!! You thought ahead and left the u-joint sticking in it....love it! Oh....SICK ASS LIL TRUCK!!
Good to se you stayed with the "something from nothing" theme and made your own megaphones! Good deal!
DAMN!!! I love that 70s FUNK. You hardly hear it any more, YO! You also just saved a bunch of coin on those tubes. Awesome
The tunnel ram was a perfect choice for this truck, and love the plan for the exhaust! Keep up the great work!👌😎
"An enormous amount of suck"....if that ain't the best line of all time, I don't know what is!
That 36 grill looks badass 👍
Great vid, I love this project!!!! 👍👍👍
I knew Brent could build anything. Custom Pipes from scratch, yeah man. 😎👍🇨🇦
GREAT SOLUTION WITH THE PIPE BENDING. WELL DONE.
I like those trumpet tubes, It's gonna look rad. Gotta love ole Pablo he's just so laid back! 😊✌🏼🇺🇸🇨🇦
Love ur dog Pablo has quite an expression on his face as he waits for you to finish lol ❤❤👍👍
Like your how to do it work Brent.I have learned so much from your work.
Good job on the bell exhaust, Brent. Can’t wait to see how you incorporate them into your headers. I know they will sound good. Thanks for sharing. 👊😎👍
Metal master at work again great job as always
Prime Time entertainment one heck of a good fabricator 👍😎
Very nice job making the megaphone pipes since you had the Speedway ones as a pattern. For future consideration, an old school hot rodder tip for making cheap megaphone pipes was to use early Ford torque tubes. Axle housings would work but be thicker and heavier. You cut out the front tapered portion of the torque tube to whatever length desired and get 2 or 4 exact tapered pipes. Love this ‘37 truck build!
The truck is looking awesome. You did a great job on those Pipes. Amazing Fabricator. Great Video Sir. Thank You for Sharing..
Brent ... the term you're searching for @35:50 is "Tapered Mandrel". Liking your idea to make a permanent Mandrel ... and using an old axle with 1/2" female sockets to allow you to use a ratchet for rotation. But hey, you did an amazing job with the tools (including your Feet) to accomplish the task at hand. Bravo !!! Besides, given the on-going "Freedom Convoy" you probably would have to wait a long while to get another header kit ... GO CANADA !!!
You can't build your own trumpet headers .
Brent , here hold my beer . Absolutely brilliant most people would never attempt it really cool
Pablo is such a chill dog.
Humans don't deserve the amount of loyalty they give us.
"Try locking your wife and your dog out of the house on a cold night, then see which one is still happy to see you in the morning. "
25:00 Wow. Nice funkified sountrack. Thanks for taking me straight back to the 70s. Groovy, man.
Nice work Brent . have a good week you and your family.👍👍👍👍👍.
Truck is coming right along. Great job. Headers looking good. Truck has great stance.
The pipe wrench was genius! I was just thinking what can Brent grab that with and twist it with, and voila, you got a pipe wrench!
Nice usage of parts laying around ,you look at a flat piece of metal and visualize megaphone style exhaust! I just love metal fab, you can make anything you can visualize!! Great job great content, spot on . Thanks jim
that tunnel ram setup looks mean!! this build is absolutely mind blowing, awesome job Brett :)
Ingenuity at it's best. Watching you put all those clamps on before welding your last pipe, I thought maybe a few well positioned hose clamps might make the job of closing that gap a little easier. Nice job!
Those are going to be cool!!!!! I love seeing the dogs!!!!
Brent love this project👍 Thank you for sharing your Brain with us. Amazing stuff👍🙏☮️🥶❄️
From STL 314
Great vid....but Pablo’s my boy.....he steals the show!!! 😂🤣👍🏻
I love how this is shaping up. Got to watch the pennies!
Wow thats looking really good!! Love the motor.
Nice work, I can't wait to see you wield up the flanges to the manifold. That cab has nice lines and maybe beautiful in he end.
Hi Halfass Kustoms from the D Michigan and Thanks so very much appreciated your time and video informant way to Building your own Headers, hey I've done a lot of Metal work, but never pipe making, watching you is Awesome, and I learn something New every day 🤩✌❤🤲😇🐴
Winner,Winner, save 400 bucks damm,after ur build u might want too make that jig,,make few extra bucks..lol ..lookin great with those 2×4 on top..sweet..
Sorry the shipping is so high for you guys in Canada. BUT you guys can build anything and is is great to watch some one do a HALFASS job and it is perfect. Great job Brent with help from Pablo.
Top notch as usual! And I love your elevator music. I think Pablo does too.
Brett gives it to you better than prime time tv ⛄️
I like the way you made the headers tubes true craftsman
Nice fab work.
I can't believe you got the results you did with that pipe wrench, lol, just gos to show you fabricating is in the hands of the beholder
There's so much to like about your videos, I just love watching hot rod stuff and you're showing us how to do it, easy and on the cheap, then there's the music -nice, relaxing and uplifting and there's Pablo ... what a dude!! Keep 'em coming Brent!!!
There at the end, it looked like Pablo was thinking, hurry up and finish this thing! I want to go for a ride already.
Looking super cool!✊
I've been running a tunnel ram with dual carbs (made/tuned for the tunnel ram) on my BBC street rod since 2014 with absolutely no problems...just more HP hehe. About 30-40 more. People told me I'd have problems with it and it would run/idle bad but it's ran smooth and fast since I put it on. Getting the right carbs made for a tunnel ram and right heads is the key. Brett's little truck is going to haul ass and look cool too!
That's some next level skill set you have there.
Loved the welded on leverage bars !
You never fail to impress! I don't think there's much you can't fab up from a few bits of mettle.
Almost at 100k subs!!!! Lets goo! Great work love the build!
Well it took you longer than you thought it would Brent but you saved a pile of money! Made for a great episode!
Thanks Brent for sharing another great video with us. Well once again it’s quicker and cheaper to make it yourself.🛠 Give Pablo a pat or two for me.🐶
Hi Brent always enjoy your work attitude hard working stay safe out there bro regard
woo that motor setup is cool love the carbs. won't get much gas mileage but oh well. next video will look really cool. the exsult on your ride.👍👍
Badass oldskool cool, looking great Brent
I like the way you think, I'd just pinch an axle and have a heavy wall master for a form and cap the ends with a half inch square hole for a breaker bar and a cheater pipe for a good twist, you could easily cut a paper pattern for your layout, build a lower roller under your axle for a mass production type of setup 😉
Oh, yeah! Dual trumpets for sure!!
I knew those bars were going to get in the way.. But the pipe wrench idea was great! Yeah cones don't roll straight..
I agree with you Brenton grill shell, looks like it belongs on a one ton, lol. I measured my 32 shell it’s 3 1/2 inches. Pickup looking REAL COOL!
It’s just awesome you make your own headers. This is a first for me. Thank you for sharing!
Pretty cool stuff Maynard... header time!!
Fantastic job fabbing those pipes!
Now THAT was alot of work! Very nice job!
She’s looking great!
I think those trumpets are good, nicely done
you are correct, the rad needs the brent touch! the look is there but it needs a diet? great music trac as always!
I like the way you find a solution to everything at least cost. Makes the end product more satisfying. Thanks for showing how. Joe
You are pretty talented dude! Very impressed with your work! Enjoy watching and learning! Carry on!
The truck looks good ! 🤔 I like the way it looks.
Awesome man! Thanks for explaining how you did it too. Cool to see even you learning throughout the course of the video.
We could almost see the bright light bulb above your head when you were thinking of the megaphone fabricator. 😅 Great video as always Brent.👍👍
Looks great all together. Im ready to see you driving it with your co-pilot.
Your ability to work metal ceases to amaze me, but you're going to go deaf in a hurry when you fire-up that 327. Can't imagine you'll make many friends driving that in downtown Winnipeg. 😁
Definitely agree that the single megaphone just didn't look right. I think you nailed the look going with two, can't wait to see the finished product. Dig the valve covers!
Very crafty there Mr want to see them cut and together 👍
Magical moment when the cab was lowered down into place. The vision becomes reality. It’s kool man!
Probably made 20 of those for bikes years ago. We used worm gear hose clamps to pull the gaps together. Much easier than using a vise, vise grips, etc.
You can use the wall hanger as part of the jig. On your plasma table you can cut the one way gear and pawl assembly. Simple for you. Enjoy
They all can't be winners. Great job on exhaust tips.
suggestion for a nice shade of green>> rootbeer ;) lol
It's always been in a pleasure to be in your workshop Brent
,🇦🇺😎
Brett: I think you could market those and make a nickel especially if you do make a fixture. Nice job man, love your work!
I sure do like the way You do things....all with an artistic eye
35 ford pu grills are much thinner (side profile) than your 36 grill, that’s why the 35’s are in such high demand IMO….this build is really fun watching it all come together….
Well the Shop Foreman put you to work with those magic hands to do what you do best and that is to make car parts as needed. You can remove a motor and transmission in an hour, in what would take the backyard mechanic two days. And making those Megaphones exhaust in an hour at first would have taken a backyard mechanic two days just to come with a plan, unless he watch your TH-cam. Pablo is your biggest fan, he watches you almost the entire show. Anyways, great video.
Great work Brent! I love the farmer ingenuity that you display. My broke ass can’t afford to buy stuff so I love watching you build what you need!