be curious to know... if I bought something like this from China, what are the step 1 fixes I need to do... change... wanting to control the unit not via the on system control interface. i've heard things like air flow/extraction, etc. this being 2 yrs ago... allot could/would have changed ?
I am considering buying a fiber laser, but the one thing no one ever talks about is importing from china, Did you have to import your machine, and how do you handle that aspect of it. I am located in the US
Hey there ! I am having issues with the key "USB" , every time I plug it into my pc it states USB malfunctioned, therefore I haven't been able to use it. I have been looking around for information but honestly I can't find a resolution to this issue. The USB is marked it says lihuiyu studio labs - 2019.08.15 .If you are familiar with this issue what would you recommend me to do?. nice videos I have the exact same laser engraver but the brand is preenex. I'll appreciate it if your can help me out with this one !, Thank you!.
hi sir, i see in your video there is a wire attached to the laser cutter, what is that wire? mine doesn't have that wire! Please let me know! Thank you so much!
I just purchased a use k40+ compatible with lightburn when I try to make cuts it burns a straight line to the next cut laser stays on the whole time how do I fix that
For me it is not working at all for 3mm plywood. It is not cutting through in fast speed. And in 6mm/s there is flame very often(30%). What are you cutting(material and width)? What cutting speed do you use?
How can I get the software. I have a similar one but no software
Not happy with the loose tube getting dragged around, hopefully a lot of improvements have been made.
be curious to know... if I bought something like this from China, what are the step 1 fixes I need to do... change...
wanting to control the unit not via the on system control interface.
i've heard things like air flow/extraction, etc.
this being 2 yrs ago... allot could/would have changed ?
Hi thank you for the video. Could you tell me approx how long did it take to complete each of the designs?
I am preparing to buy 50w laser engraver from same store. Is it worth buying from them?
what power did you use for engraving last picture?
great video btw tnx for this test
only 10 percent and an engraving speed of 100mm / s
When I added a 50L air assist to my k40 laser It turns on and off by itself, what is the SOLUTION please 🥺?
Thank you!
I am considering buying a fiber laser, but the one thing no one ever talks about is importing from china, Did you have to import your machine, and how do you handle that aspect of it. I am located in the US
Hey there !
I am having issues with the key "USB" , every time I plug it into my pc it states USB malfunctioned, therefore I haven't been able to use it. I have been looking around for information but honestly I can't find a resolution to this issue.
The USB is marked it says lihuiyu studio labs - 2019.08.15 .If you are familiar with this issue what would you recommend me to do?.
nice videos I have the exact same laser engraver but the brand is preenex.
I'll appreciate it if your can help me out with this one !,
Thank you!.
hi sir, i see in your video there is a wire attached to the laser cutter, what is that wire? mine doesn't have that wire! Please let me know! Thank you so much!
it is only a home-made air assistant, it is not included in the package
@@kukomio Thank you!
I just purchased a use k40+ compatible with lightburn when I try to make cuts it burns a straight line to the next cut laser stays on the whole time how do I fix that
Hello thanks for this video it my 1st time with laser machine and i bought this am afraid
What setting can i use to cut fabric
1,75mm /23-40% power laser + Air asist
K40 al meu 1,75mm / 22.9% putere laser+Air asist
Ok
what is the secret for this CLEAN CUT, no burn...
just i used air assist
@kukomio Your waterpump, can it be totally under water?
yes it must be because the water at the bottom is colder and the pump also has suction cups for fixing to the bottom
Can you provide mode fole which is support 40 wat which i getting bigger then it
You should not run the laser on 99% power if you want the tube to last a bit longer.
you can't see how many amps you're drawing on these digital devices.
Is there a source code for those rabbit Easter egg holders? they look amazing. Great video
on this page you will find many vectors 3axis.co/
For me it is not working at all for 3mm plywood. It is not cutting through in fast speed. And in 6mm/s there is flame very often(30%).
What are you cutting(material and width)? What cutting speed do you use?
Nice
How this price???
Anybody on NSW AU Central Coast running one of these machines?
Will be soon
why did you come out the table
Is it possible to cut iron or steel with it ?
It is a small power for cutting. Iron or steel can be gently engraved.
Very Good video,,, Can you share with me the file for the easter bunny .. thank you in advance
You can find a lot of vector on this page 3axis.co/free-vectors/easter
Is that work 40 wat k40 machin with k40 wishper
@@kukomio all are cdr format how work in it
Donde logro conseguir una en Venezuela
How can I order, and how much it cost ?
s.click.aliexpress.com/e/_A97qZs
Also in my machin drsgonr chsin not that pipe
Kinder Surprise!!!! Yeah
Price
Contact details
I want do buy this mashin
I have received now this machine but i have not the plate you put in the center of the working plan. Why?
I bought it separately, it is not included
@@kukomio ok but is it possible to work without this?
@@kukomio Where did you bought it?
s.click.aliexpress.com/e/_A97qZs
Price