I just replaced the cam plugs and pcv valve.. I'm going just go ahead and buy a new vacuum pump after a hard time taking it off best to buy a new.. I'm going replace the coolant temporarily sensor since the vacuum pump off..
Brother same car i have a vacuum sound coming from brake booster inside the dash (the soud gone once i presse the brake pedal ) how can i make sure that is break booster failure or the vacuum pump or this sound related to the bad break pads
I replaced the o rings with the same kit,3 months later in driving and my brakes peddle gets super hard and I smell something burning. I open the hood to see oil coming from the o ring i just replaced and opening up the brake vacuume the piece that spins around had exploded into hundreds of pieces.
It's still holding. just like installing a new pump. No leak or drip. Most of the time it's just the gasket seal o rings that need replacing. but if ur vacuum pump is bad then replace the whole unit.
Good work and great video! I am glad our kit was able to get your vacuum pump sealed up.
Mine leaked after 1000 miles. Thanks for the video.
Thanks my bro very detailed 💯
I just replaced the cam plugs and pcv valve.. I'm going just go ahead and buy a new vacuum pump after a hard time taking it off best to buy a new.. I'm going replace the coolant temporarily sensor since the vacuum pump off..
Brother same car i have a vacuum sound coming from brake booster inside the dash (the soud gone once i presse the brake pedal ) how can i make sure that is break booster failure or the vacuum pump or this sound related to the bad break pads
I replaced the o rings with the same kit,3 months later in driving and my brakes peddle gets super hard and I smell something burning. I open the hood to see oil coming from the o ring i just replaced and opening up the brake vacuume the piece that spins around had exploded into hundreds of pieces.
I replaced the gaskets on my c300 and put everything back together and the breaks stared to get hard on times ¿any ideas on why this happens?
Mines is doing that too right now. How did you fix this?
Any updates I replaced my seals now my brakes hard at idle
Can we get an update? How did it hold up?
It's still holding. just like installing a new pump. No leak or drip. Most of the time it's just the gasket seal o rings that need replacing. but if ur vacuum pump is bad then replace the whole unit.
Need sealent when install again in the car?
@@ohiyou9883 yes I used the blue one mine is still working perfect I saved like 400$
Where actually you put the sealen/selicon
@@ohiyou9883 bolts and any were where it looked like it need it...