How To Install LED Downlights With No Access Above
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- How To Install LED Downlights With No Access Above
00:00 Intro
00:11 How To Locate Ceiling Joists & Mark Out
02:06 How To Cut Holes For Downlights
03:46 How To Run Cables With No Access Above
08:16 How To Connect Cables To Existing Power
10:20 How To Install Quickwire Downlights
In this video we are demonstrating how we install downlights (LED spotlights) with no access above the ceiling.
A step by step guide to locating ceiling joists, drill \ingholes for your new downlights and running your cables all from underneath without damaging your existing ceiling.
No access above your ceiling doesn't have to be a roadblock to achieving the lighting you desire.
Connectors and spotlights from @quickwire80
Twin & Earth Cable: amzn.to/3N2iD5s
Electrical Voltage Tester: amzn.to/40oMMPH
Electricians Screwdriver Set: amzn.to/3UTZh4A
Hole Saw Set: amzn.to/3Frvbyk
Magnetic Cable Puller: amzn.to/3S8cF5y
_______________________________________________________________________
Please like and subscribe to The Home Improvements Channel UK
MORE VIDEOS FROM THE HOME IMPROVEMENTS CHANNEL UK;
Step-by-Step Guide: How to Install a Kitchen;
• How to Install a Kitch...
How To Install LED Downlights (Ceiling Spotlights) | Easy Step By Step DIY Guide;
• How To Install LED Dow...
How To Install A New Door To An Old Frame | Easy Step By Step DIY Guide:
• How To Install A New D...
Two Tricks You Should Know Before Installing Skirtings (Skirting Transitions);
• Two Tricks You Should ...
________________________________________________________________________
Instagram - thehomeimpr...
Facebook - / thehomeimprovementscha...
TikTok - / thehomeimprovementsuk
Shop - www.amazon.co.uk/shop/thehome...
Email - diyukhomeimprovement@gmail.com
________________________________________________________________________
Thank you for watching The Home Improvements Channel UK.
Disclaimer:
The content provided by The Home Improvements Channel UK is for informational, educational, & entertainment purposes only and some projects and tools may not be appropriate for all skill levels.
This is a guide only and The Home Improvements Channel UK cannot be held liable for any work undertaken or damages caused.
#diy #howto #homeimprovement #spotlight #electrician #lighting #homerenovation - แนวปฏิบัติและการใช้ชีวิต
Very helpful video. Why you don't release a video how to rewire a house or just the lighting. Thank you
Very good video 📹 from Phil and very explanatory.
Phil you need to teach your skills to the other chap. He always starts the video saying "we are going to" and then he goes missing 😅😅😅😅😅
🤣🤣 👍🏼
That Quickwire stuff looks amazing! ;)
🤣👌🏼💪🏼
Downlights are ugly as hell. Everything else is decent
great demo.
😊👏🏼
Wt about checking for pipes or something like that between the joists ?
Recommended to use an endoscope inspection camera with light..
Great video! Great product
Thank you! 😊👌🏼
Nice video but can you show how to change from a rose pendant.
Do you guys have a link to the flex drill drive adapter please? Looked on your Amazon,but can’t find it? Thanks
Anyone know what flexi drill bit hes using? 👍
What was the Flexi bit please?
Going to list it on our amazon 😊
Great video guys 👏. Is there a limit to how many lights I can add to the chain? I am going to need 9 but don’t want to overload the circuit.
9 led down-lights will be fine on 1.5 cable 😊
@@homeimprovementsJim’s it is not an electrician, don’t encourage him. What you are doing should see you struck off any domestic installer scheme NICEIC or otherwise.
Hello Guys,can you share a link for the magnet wires please.Thanks
Listed on our Amazon store 😊
@homeimprovements Thank you for the reply,Yes I found the link in the description.Cheers
On the T connector does is matter which side of the plug you put the loop in and loop out?
Yes it’s labeled 😊
@@homeimprovements on the t connector plug I can only see LEN on one side and NEL on the other, no other labels. I wasn’t sure if the power in from the previous light has to go in one side and power out in the other. Or if it doesn’t matter.
👏🏼👏🏼
Where are you based? Can i pay you to install some spotlights in my livingroom with no access from above? Walsall
Brill
Much appreciated have a great day 🙌
R1+R2 MWC?
You would do a R1 + R2 but because this isn’t a new circuit for this type of job a MWC isn’t required but obviously if it’s a rental / housing association it may be required for the tenant.
@@wesley3312 I thought a diyer touching their own electrics is illegal, as I keep getting told by every spark.I’m competent in changing a light fitting and probably know more about electrics than you average diyer but unfortunately I’m not allowed to do it for insurance purposes so I’m told 🤷♂️
@@kingofthetrowel1725 if you’re In a rental / housing association, or your home insurance requires you to have certification then yes, you would require someone who is competent to complete the works and to issue a MWC. It’s not illegal, but some works require signing off, the person needs to be a member of a competent person’s scheme, NAPIT for example, or the job needs to be notified to local area building control for it to be approved/ checked over.
Great installation. But ugliest downlights I’ve ever seen. They look pregnant and cheap.
Why are you showing people how to install lights. Only a qualified electrician should be carrying out an alteration to an existing circuit. You are presenting your tutorial like you are teaching people with no idea. Liability disaster for your business and reputation.