Hydro Brake booster leaking repair 1999 Chevy 3500HD
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- This is a repair on a leaking Hyro Booster, while on the truck, replacing the seal that usually fails, causing most common leak. Just make sure you don't misplace the small metering valve washer, locater between the housings two bodies. Usually it stays in, but it can also just fall out, as easy.
Welcome to my TH-cam site, here we'll have hunting, sailing, home repair and things that don't quite fit my other two channels, which are "Smokehouse BBQ" cooking channel and "Tafe Farmer" which has every thing to do with my tractor and things it does. Thanks for visiting and enjoy my content. - แนวปฏิบัติและการใช้ชีวิต
Yep redid mine last week same way. Cleaned out some pieces of loose rubber gasket and thoroughly sprayed assembly on firewall with brake clean to make sure I got it all out... Well I'm redoing it due to the fact a very small piece of rubber got in between the new gasket and the piston.
Rule of thumb I keep a couple of full kits on hand, be ause they have the small three hole piece and yellow plastic dual use valve. Getem from eBay bout $18 Great job Click Click
Hey Kenny question do you by chance have a part number for the seal kit that you used ? Did you get it off Amazon ? Thanks your video gave me hope . I replaced the power steering pump and lines and the hydro booster started leaking ugh .
Bendix Hydro-boost Kit 2771004
Ebay
Smokehousebbq7350 was my reply from my other reply
@@smokehousebbq7350 thank so much going to try and tackle it myself I appreciate the video
Will this also work on a 5.7 little gas?
I belive those have a vacuum booster. Diesels are hydraulic and run off the power steering pump.
5.7 gas have hydro boosters on the also
Hi: Keny, The seal that snapped in was one. The second one in the front that was just hanging at the front of the booster. Did not that second seal go at the back of the resevoir and in between the front of the Hydro?) I ask because the piece that was hanging inside the disassembled booster wasn't really clear/identified? Please let me know. I have a leak right behind the resevoir. Thanks,
The booster has the piston in it that has a seal. Is that the one your talking about? I've done this to 2 trucks I've owned, a 1992 and a 1999, they both just needed the seal on the piston and the figure 8 seal. Thats the only ones i did.
@@kennydykes892 ok. Kenny. I have a 1993 GMC 3500 SLE. LMK the website you got your parts from. Thanks.
Do you happen to have a part number or link to the kit??
GM 2771004
Amazon has them, I only used part of the kit. I've done this on two of my trucks, both just partial seal replace. Both split while on the truck. Good luck. Just put a towel under it, in case that little valve falls out, like mine did.
Stop the music