IKEA drawer front changing & fixing the location must be accurate IKEA櫃桶門 (抽屜) 拆卸及更換 最重要是量度好準確的位置

IKEA drawer front changing & fixing
IKEA櫃桶門 (抽屜) 拆卸及更換
我先告訴大家 我怎樣搵到呢一個櫃桶門嘅結構
原來我們可以從google的一個影相機位置
對準我哋要搵嘅物件
在google裏面就會跳咗好多出嚟
選擇的時候要看清楚是否需要物件
再看清楚個名稱是什麽
然後就去youtube找
果然讓我找到 原來這是 [宜家傢俬] 的一款櫃桶
我找到的視頻是由一個外國人上載的
他用的方法比較誇張 而且搞到我更慘
這一段我不詳細開字幕
結果我郤因禍得福, 經我研究後,
找到一個十字螺絲位
只需要用十字螺絲批在這個位向上擰一擰
個門板就自動打開
之後就見到門板兩邊各有一個扣
把兩個扣拆除後
最重要就是按原來櫃桶門板量度好準確的位置
然後準確標記在新門板上
如果高度錯了, 可能會令到上下櫃桶頂住
如果闊度錯了, 個櫃桶就不能扣返上去
如果好似我咁唔好彩
第一次因為睇咗之前嘅視頻而出現咗一些問題
只需要回放這段視頻,
再找到一個十字螺絲位
就可以輕易安裝或拆除
 
In the previous video, I said that I will tell you how to remove and install the drawer front
Let me tell you first
How do I find the structure of the drawer front
It turns out that we can use a camera location on Google
Point at the object we want to pick
A lot of stuffs will pop up from Google
When choosing, find out the name of an object
Then go to TH-cam to search
Fortunately I found it. It turned out that this is a drawer from [IKEA]
The method the TH-camr used was more exaggerated and made me worse
In the end, after my searching
I found a Phillips screw position
Just use a Phillips screwdriver to screw up in this position The door opens automatically
Then I saw a buckle on each side of the door panel
after removed the two buckles
The most important thing is to measure the accurate position of the original cabinet door panel.
The location must be accurate
If the height is wrong, it may cause the upper and lower cabinets to withstand
If the width is wrong, a bucket can't be buckled back up
If some problems occurred
Just replay this video
Then you can easily installed or removed
Can put the drawer back after fixed the buckles