How to Install Toyota FJ Cruiser Mirror LEDs
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- NOTE: You may also access the factory bulb by using a long screwdriver to pry the mirror up from the bottom to unlock it.
How do we test and measure products? Learn more here: www.diodedynam...
Get your FJ Cruiser mirror LEDs here: www.diodedynam...
Video installation guide of Diode Dynamics mirror LEDs on the Toyota FJ Cruiser.
Email us with questions at contact@diodedynamics.com or call (314) 205-3033. Thanks for watching!
He removed the mirror wrong and he didn't show you but two of the clips on the top backside of the mirror are broken off because it was removed wrong. To properly remove that mirror you lift up from the bottom not the side and use a long screwdriver in the center to pry it up there's a channel for that purpose!
Please do not remove the mirror that way you're only break the clips! Again to properly remove it used a long screwdriver and find the channel on the bottom side of the mirror and use the screwdriver to pry the mirror up to unlock it.
Good catch Greg. The way shown is a guarantee way to break the tabs off the top.
I was about to comment the same!
@@Hyperion65 would you mind making a video of how it's properly done? I would greatly appreciate it.
You’re right, too bad this isn’t pinned, wouldn’t have broken tabs right now if I had seen this
True. but some year model FJ may have different clip configurations.
Pulling your mirror out in this manner will break off the guide tabs on the top back of the mirror bracket and they are both broken off the mirror he just took out. The bracket on the back of the mirror was designed to be removed using the screwdriver from the bottom method. The guide tabs aid in the positioning the mirror during remounting, but play no role in securing the mirror in place.
+Redtider Thanks for the tips!
Not a good video! Yep I broke the top tabs, not a problem, but FWIW there are tabs at 3 6 & 9 o'clock that you pull and the tabs at 12 o clock slide under or pull down as you remove them
I hope your products are better than your web site. On live chat she tells me to email for info. She told me she cannot answer any question do to tech problems..No one even got back to me, And the Number is no good if you live in the USA. Unreachable.. I do not know how your even in business.
+Diode Dynamics ok thank u..
I bought DD LED and I followed this video instruction to remove the mirror. It did not break upper tabs but the actuator part came with the mirror. So I had to separate the actuator from the mirror and installed it on the motor unit first adding silicone grease before installing the mirror. The mirror part should be pulled out from the bottom not from the side I think.
Yup I did the same damn thing watching this video. Luckily I salvaged the actuators and mirror.
Your video was very helpful, THANKS for sharing sir!!
You broke the top two tabs by taking it off that way.
+Spaldäm's Adventures Thanks for reaching out! For this installation, we were able to snap the mirror off and keep the tabs in tact. If you have any other questions, please don't hesitate to contact us!
Yeah, except you can see in your video that the top guide tabs are broken. You even said it's harder to get off the first time, because you break them the first time. You need to pull up from the bottom to avoid breaking the top guide tabs.
+Spaldäm's Adventures Thank you for the tips!
Thank you sir! I just replaced the bulbs on my 2007 for the second time and your video was super helpful, again!😎
We're glad it helped!
Found this video, ordered the bulbs, put them in... THEY LOOK GREAT! I have found several other items that I would like to get from Diode Dynamics now that I have made my first order. The pictures and videos really help and make the whole thing easy. I did snap one of the clips off of the back of my mirror when I was removing it, I did it exactly as it was supposed to be done but I think that my mirror was just so tight that it was unavoidable, mirror still holds well with the remaining clips. Just a word of caution, watch this video before you do it yourself to avoid or minimize any potential damage.
+Mike Culp, thanks for the support! We appreciate your business!
This was useful.
Thanks! Switch out both today. Woukd have ruined the smaller clips if I didn't watch.
Thanks for watching. We're glad we can help!
I took the passenger side mirror off and the clips on the back looked completely different from the driver side, not sure if it’s due to it being an aftermarket mirror
This is quite possible! We made this install video based solely on OEM mirrors. Sorry about that!
Evidently, it has never been taken of. I just spent the last hour working on my drivers side mirror. When I tried to get the mirror off it wouldn't come. I finally used a plastic trim tool. It pulled the whole assembly off. 😵💫 It was a bear trying to get the inner assembly back in place. I thought I was going to have to buy a whole new mirror. I finally got it back on and crossed my fingers hoping the power mirror mechanism would still work. It did! 😃🙏
Are these the brightest bulbs available? If not, which are the brightest that you would recommend? Also what about removing the plastic filter membrane inside the light housing to improve brightness?
+Michael Waters Yes, for this video, we installed our HP5 LEDs, our brightest bulb model available. Check them out at the link below! Removing the plastic cover in front of the bulb would increase your output, but we would not recommend leaving these bulbs exposed in the housing. If you have any additional questions, just let us know!
www.diodedynamics.com/mirror-leds-for-2007-2014-toyota-fj-cruiser-pair.html?
Thanks for the reply - I will check out those bulbs. Also, I was not meaning the external plastic lens, I was talking about the diffuser film inside the bulb housing. I'm think that removing it would have a positive result.
Caution everyone this is not as easy as it looks and I'm here to tell you even if you do this the right way there's one thing you need to do and that's put tape over the mirror I learned the hard way I didn't do it for the driver side and I cracked the glass pretty easily and cut my hand when I did the passenger side I put an x with some packing tape and it was just as hard to get out but the mirror did not crack I ordered a new mirror for the driver side and before I put it on I will put tape on the mirror again I hope this helps someone
Thank you for the helpful feedback, Dom!
Excelente
I've got a 2003 Range Rover can you show how you change the puddle lights in the mirrors I've been told that when the light goes out you can't replace it? Can you help ?
William, please shoot our sales representatives an email at contact@diodedynamics.com and we would love to help you out with your Range Rover. Thanks!
Question; are the lights legal? In other words, they're not too bright, are they?
They are in fact road legal!
I just ordered these for my 2011 FJ...has anyone had any trouble with these blinding oncoming drivers or are they not bright enough for that? Thank you!
+Jdatt13 You will see a significant increase in brightness, but these LEDs won't blind oncoming traffic. If you have any other questions, just let us know!
All I can find around my area are 194 bulbs and the shops say that it is ok to use those as a replacement. What do you say?
+Tex Mex 86, yep, a 194 size bulb should work no problem! If you have any other questions, don't hesitate to contact us!
The video is good, the drivers side is more difficult and be nice putting it back on...
Just ordered these and installed them. Can not get them to work. Any help?
Hi Doc, thanks for reaching out! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to help you troubleshoot that!
Humm... I think I will use a halo fog light instead
Installation for a halo will require a little more dis-assembly, however that is certainly an option as well!
I read these bulbs need to be 5 watts max. Is that so for the one installed?
+tx91791, these bulbs are 100% compatible with this application - no issues at all!
Thanks for the video, it was very handy when I installed my Amber LEDs! They looks great.
+Mitch David We're glad we could help!
good
Can someone please tell me Where the switch is for this light?
Hi there! The mirror lights on the FJ should come on as parking lights.
which type is used in this video ? there are many on the website
+Rabih Younes, The bulbs being used in this video are the 921 HP36 Cool White LEDs.
I looked for the 921 hp36 and they were nowhere to be found on the site? Have they been taken off the store?
+Cesar Franco The 921 HP36 LEDs are just out of stock right now. They should be back in stock in a few weeks!
+Diode Dynamics aaaahh ok, appreciate the reply and can't wait to order them! Do you all sell a complete light replacement kit for fj cruisers? Like taillights, headlights and interior and all that good stuff?
+Cesar Franco We've got your FJ Cruiser covered--below is a link to all the products we offer! If you have any questions, feel free to contact us!
www.diodedynamics.com/store/listed-by-vehicle/toyota/fj-cruiser.html
So simple even a man can do it!! Thank you for this TH-cam!
You're very welcome!
Because of this TH-cam and your reply to my comment I have just placed an order for these LEDs and a dozen other Diode Dynamics items. Can’t wait for them to arrive.
Making my FJ my own.
For what it’s worth:
Griffin and Casey (sp?) were extremely helpful making sure my order was complete (getting the smart flasher thingy, and answering a few other questions). I know at the end of the month, when the credit card bill arrives) my wife will raise her eyebrows at the order but by then, hopefully everything will be installed and she will see the improvements and not make me return anything… hahah.
Thanks again, Paul!
Oh, yes… one more thing… please get the powers that be at DD to produce an H4 lead lamp so my front lighting will be all Diode Dynamics.
Cheers!!
@@robertbooth7396 We will definitely pass it along!
I've always been curious about these lights. What are they meant for on the mirrors there?
+znovosad555 They add an extra source of light to the exterior and show off the width of the vehicle. From the factory, they are generally not bright enough to illuminate much, but our LED bulbs make them brighter and crisper. If you have any other questions, just let us know!