can you please help me I bought a Meterk mini portable laser ....one similar to this one in your video earlier this year in May and it was working fine....initially i used it to engrave small pieces of wood that I use to make key rings....it was working fine until last week....when I sent an image to burn....it starts off fine and then the laser starts burning only to the left it keeps running on the left side even though on the software the image is centered and the board in centered....the laser keeps printing the image to the left only....do u know why it would do that? is something wrong with the laser head?
Unfortunately I do not know the answer to this just yet, i've been using it for a few months now a few times each week and it still works the same as the day I got it) Hope that helps a bit!~
The laser’s eye?! I’d be more concerned about your real eyes getting cancer with this cheap Chinese units bouncing it’s radiation all around your room. 🤨
I have the Meterk dk-Bl 1500MW, Um I have yet figured out how to do it, there's many people stating anywhere from using mustard, to tape, etc,... to engrave on metal... unfortunately none have worked for me, and I don't recommend trying it on bare metal, the laser can reflect right back up into the laser itself and fry it.
Hello from Montpellier / France. I am looking for a laser engraver to engrave names on my stainless steel jewelry. Unfortunately, there are a lot of negative "comments", because there are a lot of problems with the use software.In addition, I am with a MAC, so double problems.Thank you for your answer. Patrick Dupré
dude, u can always use adobe or any CAD software..once done just make them jpeg..i believe this simple machine only read jpeg and carved to black finish..
Hi, I bought this machine and they sent me the wood, but they also sent me metal dogtags with it and so far I have not figured out how to get it to mark on the metal dogtags. Do you have any idea how to make it to mark on the dogtags. Is there a certain setting, maybe put the laser at a certain strength or is there something I need to put it on? Thank you. =)
hello am working on rubber stamps... do u recommend me this laser engraver for small detailed rubber stamps!?
What is the small PC/Notebook ?
I have one but it now stops following the design then keeps printing on the left or looks like it runs in one line. Any idea
Hello does this work on black leather
can you please help me I bought a Meterk mini portable laser ....one similar to this one in your video earlier this year in May and it was working fine....initially i used it to engrave small pieces of wood that I use to make key rings....it was working fine until last week....when I sent an image to burn....it starts off fine and then the laser starts burning only to the left it keeps running on the left side even though on the software the image is centered and the board in centered....the laser keeps printing the image to the left only....do u know why it would do that? is something wrong with the laser head?
slow romantic music with burning the knife......sounds legit :)
So how well does it work on 3D prints? I guess one would have to go OCD to get the home right for the laser and part.
Hi! does it work on paper greeting cards like 0.35mm thick? thanks
Is it really time consuming?
not at all! quick and easy actually
@@RealityCheckVR How?
ill will get one of these...thnx for review..just my concern is on parts..especially the laser , how many hours the laser eye can last..
Unfortunately I do not know the answer to this just yet, i've been using it for a few months now a few times each week and it still works the same as the day I got it) Hope that helps a bit!~
ok thnxx fo replying..some web stating the laser eye can be replaced (sell separably)..1500mW looks promising with BT apps via smartphone.
The laser’s eye?! I’d be more concerned about your real eyes getting cancer with this cheap Chinese units bouncing it’s radiation all around your room. 🤨
may i ask one thing. can it engrave an anodized almnium. like a fashion blank dog tag? thanks
I have the Meterk dk-Bl 1500MW, Um I have yet figured out how to do it, there's many people stating anywhere from using mustard, to tape, etc,... to engrave on metal... unfortunately none have worked for me, and I don't recommend trying it on bare metal, the laser can reflect right back up into the laser itself and fry it.
Would this laser etch out a circuit on a circuit board?
I can engraver mugs? please let me know , Thanks
Hi, have you tried lasering onto 3D prints with this?
Curious to know if the software will allow you to do cylinders (pens)?
need this answered as well
Evidently, people have made and sell jigs for this exact engraver. There are videos on TH-cam. That is actually why I'm interested in this device.
Is this printer uses ink ?
Is that a funny way to say I have more money to waste than you when you heated up the knife to just cut cellotape lol
Hello from Montpellier / France. I am looking for a laser engraver to engrave names on my stainless steel jewelry.
Unfortunately, there are a lot of negative "comments", because there are a lot of problems with the use software.In addition, I am with a MAC, so double problems.Thank you for your answer. Patrick Dupré
Is there any software to use to create your own designs that you can import to the software?
dude, u can always use adobe or any CAD software..once done just make them jpeg..i believe this simple machine only read jpeg and carved to black finish..
I am not a fan of your presentation style, but the information you gave was useful.
Hi, I bought this machine and they sent me the wood, but they also sent me metal dogtags with it and so far I have not figured out how to get it to mark on the metal dogtags. Do you have any idea how to make it to mark on the dogtags. Is there a certain setting, maybe put the laser at a certain strength or is there something I need to put it on? Thank you. =)
I have never engraved metal with mine, not sure if it's powerful enough TBH, mine also did NOT come with metal dog tags, just the wood.
I still dare you to use a chain saw for one of the unboxing! lol
no way u shaved the bush
I have one question for you: are you gonna go ahead and go ahead? Maybe you should go ahead.