Morley IAS DXC Panel Commissioning | Fully Practical | Autolearn | DX CONNEXION | By Ansari29

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น • 236

  • @Arbab_vlog88
    @Arbab_vlog88 ปีที่แล้ว +1

    Aapka video bahut helpful hota hai bhai

    • @Ansari29
      @Ansari29  ปีที่แล้ว +1

      Thank you, pls share my videos in your company group

  • @techopinion7639
    @techopinion7639 3 ปีที่แล้ว +1

    You are doing good work. Professional work 👌
    Thanks from Lahore, Pakistan

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Thanks for your comments 🙂

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Pls share my videos in your company group

  • @tahirshaikh3989
    @tahirshaikh3989 3 ปีที่แล้ว +1

    Thank u sir
    Most Awaited for this Vedio
    Jzk

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Your most welcome Tahir

  • @rabbualam8568
    @rabbualam8568 2 ปีที่แล้ว +1

    Sir aap se ek request h ki addressbal system pe ek video banaye jis me kya kya device lagta h connection or

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Yes Zaroor

  • @rabbualam8568
    @rabbualam8568 3 ปีที่แล้ว +1

    Sir plz aage ka video bana kar daliye mai aap ka video ka wait karta hu ane ka

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Sure Alam, thoda busy ho ek project m, jald hi new topics par video aana shru hojayega....

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Thanks for your comment dear 🙂

  • @zabirshah3472
    @zabirshah3472 2 ปีที่แล้ว +1

    Assalamualaikum Bhai .aap ne zone ke bare men nahi btaya zone se hi hooter bajta hai kis detector se hooter bajana hai

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Detector k activate hony par NAC circuit activate hojati hai or hooter ko supply milta hai

  • @jayantkumarmangaraj8689
    @jayantkumarmangaraj8689 2 ปีที่แล้ว +1

    Informative Vedio,
    Can you please make a Vedio on addressable FA system with a laptop or desktop commssing.

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      I will try

  • @ajaysingh1921
    @ajaysingh1921 2 ปีที่แล้ว +1

    Hooters kawn sa lagega sir kya Morley ka Loop hooter lagega

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Loop hooter.... Ya fir CM k through bhi hooter ko activate kar sakty hai but best loop hooter sahi rehta hai

  • @rajeevmeena2262
    @rajeevmeena2262 2 หลายเดือนก่อน +1

    Hi sir sir commissioning laptop ya keypad se apan nahin kar sakte

    • @Ansari29
      @Ansari29  หลายเดือนก่อน

      Karsakty hai but bohot time consuming h

  • @hamidsayyad2727
    @hamidsayyad2727 2 ปีที่แล้ว +1

    Bhia fire alaram.. K point ka kya charges h. Mtlb labour charhe

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      No idea dost...

  • @keshavprasad-cv6cv
    @keshavprasad-cv6cv 28 วันที่ผ่านมา

    Sir morley max par video banaye complete commissioning and troubleshooting

  • @nirmalone3026
    @nirmalone3026 ปีที่แล้ว

    Ji i have one doubt?
    In Est3 Panel Ct1, Ct2, Cc1 what?

  • @rishikumar9788
    @rishikumar9788 2 ปีที่แล้ว

    Sir commission karne ke liye main menu me konsa ki pahle press karte hai

  • @superknowledge3135
    @superknowledge3135 ปีที่แล้ว

    Sir mere dxc4 panel ka LOOP CARD response nahi le raha h .sab card remove karne ke baad bhi har loop ka niche wala LED hi kam kar raha b

  • @ShadabKhan-ks4hf
    @ShadabKhan-ks4hf 2 ปีที่แล้ว +1

    Sir 1 loop m kitne detecter add kar sakte hain maximum

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Morley m 99 detector add kar sakty h but har panel ka alag alag hota hai

  • @sayedmohdazim254
    @sayedmohdazim254 3 ปีที่แล้ว +1

    Bhai mujhe batao apollo x95 panel mein addressing kaise edit karte hai. 1 vlog apollo x95 mein bhi banao Programming & Commissioning per.

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Check karna padyga ....

  • @rishikumar9788
    @rishikumar9788 2 ปีที่แล้ว

    Mera or ek sawal hai Morley me beem detector ko kaise install karte hai control module - ya monitor modul me /

  • @islamiyakhan9533
    @islamiyakhan9533 9 หลายเดือนก่อน

    Sir is Honeywell Dxc 1 Morley IAS Mai conventional hoter chal skta h

  • @rohansuresh455
    @rohansuresh455 5 หลายเดือนก่อน +1

    Hi Ansari we have Morley DXC panel. we have one fault with this (LOOP OPEN CIRCUIT L1) Before one heart detector damage. we change this detector, to the same address.

    • @Ansari29
      @Ansari29  5 หลายเดือนก่อน

      Aapky doubt ka video upload hogaya h please check. Pls subscribe to my channel & press the bell icon for notifications

    • @subratsahoo3657
      @subratsahoo3657 5 หลายเดือนก่อน

      Can you send me the video link for open loop ?​@@Ansari29

  • @MDKHAN-nh5vg
    @MDKHAN-nh5vg 3 ปีที่แล้ว +1

    super 👍

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Thanks Mr.Khan

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Pls share my videos in your company group

  • @akashpandav9601
    @akashpandav9601 2 ปีที่แล้ว +1

    Sir comishning ke pehle detector blink nahi karte kya?

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Karta hai..

  • @syedzafar2068
    @syedzafar2068 3 ปีที่แล้ว +1

    MCP agar detector k bich me lagana padta hai to mcp me bhi addressing karna padega kya?

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว +1

      Yes, Addressable system m mcp m bhi addressing hoti hai ...

    • @syedzafar2068
      @syedzafar2068 3 ปีที่แล้ว

      @@Ansari29 thanks

  • @amolwankhade8433
    @amolwankhade8433 ปีที่แล้ว

    Dear .sir ...
    Monitor module. Control relay module
    And REPETOR Pnel ka ..commissioning kaise kare...
    Or isko addressing kaise kare ....
    Please bataiye

  • @atharali8314
    @atharali8314 2 ปีที่แล้ว +1

    very useful and knowledgeable video ansari bhai... how to contact to for queries

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Thanks, pls send your queries to ansari2991@gmail.com

  • @21rajmangade51
    @21rajmangade51 3 ปีที่แล้ว +1

    Sir MSFD per ek video banau na

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Ok Check karta hooo

  • @prashantsharma7828
    @prashantsharma7828 2 ปีที่แล้ว

    Agar Morley fire panel me auto Learn krenge to Jo usme address h vo delt ho jyegi please btaiye

  • @dhirendrashah2031
    @dhirendrashah2031 5 หลายเดือนก่อน +1

    If we want to add new device in exsting system so what we have to do

    • @Ansari29
      @Ansari29  5 หลายเดือนก่อน

      Just connect that device in loop circuit & do Auto learn & then do addressing

  • @gopikumarmishra8544
    @gopikumarmishra8544 2 ปีที่แล้ว +1

    Honywell ka frenhight series IFP2100ECS ka manual programming ka video banaeye

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Yes Sure

  • @tukaidutta5806
    @tukaidutta5806 2 ปีที่แล้ว

    Shudhu ok marlei hobe naki panal khule lock korte hobe

  • @ligeeshk7268
    @ligeeshk7268 ปีที่แล้ว

    Sir in this, automatically detect the panel, which sensors are conected or not?
    And any brand of facp detect automatically the sensors?
    We have the duty to edit or adress the names

  • @asgarrkl
    @asgarrkl 2 ปีที่แล้ว +1

    Please reply for the following
    1. What is the loop card concept in a addressable fire alarm system?
    2. Is there any cost difference between 2 loop panel and 4 loop panel of honeywell? or technically as we have total 300 devices in our G+5 floor. Do we need 4 loop panel?

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      1. Loop card means 1 loop circuit
      2. Yes 2 & 4 loop panel have different cost.
      3. More than 198 you have to install 4 loop panel

  • @rabbualam8568
    @rabbualam8568 2 ปีที่แล้ว +1

    Sir kab video bana kar daliyega jo hum bole the video bana ke dalne ke liye daliye n sir plz plz jaldi se

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Hi Alam, mai ny addressable system ka ek video banaya h jismai almost sub explain kiya hoo
      Pls find below link
      th-cam.com/video/_6_xiGmG4CE/w-d-xo.html

  • @mobitech7268
    @mobitech7268 2 ปีที่แล้ว +1

    Sir, how much distance should be there between two smoke detector as per standard? And for above false ceiling detector spacing will be same or different?

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Pls check my detector spacing video..

  • @guruprasad-bq9fz
    @guruprasad-bq9fz ปีที่แล้ว +1

    Can I use all Sounders in loop.....

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      If loop sounder then connect but before check load.

  • @prajapatipragnesh3504
    @prajapatipragnesh3504 2 ปีที่แล้ว

    Dxc panel main loop add kaise kare?
    Or comissioning me program kaise kare

  • @amolwankhade8433
    @amolwankhade8433 ปีที่แล้ว +1

    Sir ji..
    Monitor module ,control module
    Isolator module ..ka commissioning kaise kare......
    Panel me nhi aarha hai...

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Auto learn karo

    • @amolwankhade8433
      @amolwankhade8433 ปีที่แล้ว

      MCP KE NAM SE ATA HAI..
      USKO CHENGE KRKE MONITOR MODULE ...MON KRNA PDA SIR JI..

    • @amolwankhade8433
      @amolwankhade8433 ปีที่แล้ว

      @@Ansari29
      Sir ji .
      Monitor module.
      Jo Flow switch ke liye use Kiya hai
      Usme input open circuit aa rha hai..
      Iskya kya solution hai..
      Please help me..🙏

  • @midhunsankar9974
    @midhunsankar9974 2 ปีที่แล้ว

    Bro..we have simplex 4100 semi addressble pane.zone ways connection not adress type..we have 8 lift connected befor..now one lift NC wire is missing from fire panel..so wt we do for ne NC wire for lift?

  • @ak_double_one
    @ak_double_one ปีที่แล้ว +1

    What output is generated by the smoke detector which helps panel to recognise particular address of the detector.

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Alarm current

  • @deepaksarthi5786
    @deepaksarthi5786 ปีที่แล้ว

    Sir mujhe smoke detector se bina connection nikale smoke detector ko kaise bypass kar sakte hai

  • @prashantprabhune461
    @prashantprabhune461 3 ปีที่แล้ว +1

    Hello.,
    can you explain difference between Dx 4c & Zx 5e.
    why I should promote zx5 e then Dx

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      I need to check...

  • @sportswouldcup
    @sportswouldcup 2 ปีที่แล้ว +1

    Sir drowning se xplane kar ke btaiye Honeywell Morley panel pe please

  • @vivekkumarsingh8942
    @vivekkumarsingh8942 5 หลายเดือนก่อน

    Laptop se nahi hota hai kya

  • @mahendrasinhravalji3858
    @mahendrasinhravalji3858 2 ปีที่แล้ว +1

    Fire foults kese sol kar sakte hai

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Pls check my fault & troubleshooting video

  • @rk6786
    @rk6786 2 ปีที่แล้ว +1

    Hi bro your doing great job. I have dxc 2morlay panel fault showing device added. Once we lean the loop still same issue .. kindly give suggestions

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Try to do autolearn

  • @faisalsaleem6046
    @faisalsaleem6046 2 ปีที่แล้ว +1

    MCP mei data not available Jo fault hota ha wo kis waja say ata ha

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Exactly nhi samaj aaraha hai....? What's ur panel fault

  • @rk6786
    @rk6786 2 ปีที่แล้ว

    Next same Morley dxc2 address not set asper cabling it means as per cabling from panel 1,then 2 3,4 but detector address placed like from panel 2 address,1,4,3 if we install it's give any issue

  • @mawazahmed3560
    @mawazahmed3560 3 ปีที่แล้ว +1

    Sir Siemens Fire Alarm panel K baare me Kuch Details Bataye sir please

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Ok I will try to make video on said topic...

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Pls share my videos in your company group

  • @vinayreddy.h5906
    @vinayreddy.h5906 2 ปีที่แล้ว +1

    Please do SMX 4 loop panel video

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Yes sure

  • @vijilprajapati3756
    @vijilprajapati3756 2 ปีที่แล้ว +1

    We make communicate two morlay dxc4 panel each other. Fire occurs in one loop of one panel how to result of second panel and loop sounder are are coonect all system

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว +1

      There is one TX RX connection terminal for connecting 1 panel to other, you can simply connect & check. Meanwhile I will try to make video on said topic

  • @vijilprajapati3756
    @vijilprajapati3756 ปีที่แล้ว +1

    98 smoke detector connect in 1 loop now
    I m extend one more loop and now we are 50 device divided to 2 loop now 1 loop 46 and other loop 52
    But problem is before loop break and device divided so device missing error are occurs or not in 1 loop?

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Auto learn again, your issue will resolved

  • @MohitKumar-hn2yx
    @MohitKumar-hn2yx 9 หลายเดือนก่อน +1

    How to divice put in test mode.

    • @Ansari29
      @Ansari29  9 หลายเดือนก่อน +1

      Go to programming mode.check test option will be there...

  • @yashonathkoli7442
    @yashonathkoli7442 2 ปีที่แล้ว +1

    Sir how to clear double address fualt.

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว +1

      Try auto learn 1st & then check which detector showing double address

    • @yashonathkoli7442
      @yashonathkoli7442 2 ปีที่แล้ว

      @@Ansari29 sir Even after turning auto learning, the device is showing double address.

  • @abdulrahimkhan2029
    @abdulrahimkhan2029 ปีที่แล้ว +1

    Sir, device level fault how this problem rectify

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Detector Sensing level gets low, replace the device

  • @rabbualam8568
    @rabbualam8568 2 ปีที่แล้ว +1

    Assalamu alaikum sir video bahut din ho gaya h nhi lad rahe h kab daliye ga

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Ha alam bhai thoda busy chal raha hoo Isiliye video record karny ka time nhi milra

  • @nexttime2871
    @nexttime2871 ปีที่แล้ว +1

    Haw to connect addressable sounder in panel dxc 2 loop

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Hooter option provided

  • @tukunabehera7342
    @tukunabehera7342 2 ปีที่แล้ว +1

    LED CARD ADDED fault shootout kese kare

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Which panel

  • @rishikumar9788
    @rishikumar9788 2 ปีที่แล้ว

    Pls sir reply jarur kariye mujhe kal panel commissioning karna hai

  • @devchauhan8814
    @devchauhan8814 ปีที่แล้ว +1

    Dear Ansari ji,
    Plz tell me for logic and pattern create

    • @Ansari29
      @Ansari29  ปีที่แล้ว

      Yes, I will

  • @Satsangkamargjaigurudev
    @Satsangkamargjaigurudev 5 หลายเดือนก่อน +1

    Hi i am getting fault - No Reply from device R001. i am not able to find the device R001. please reply on the same

    • @Ansari29
      @Ansari29  4 หลายเดือนก่อน

      Check panel programming. R001 kisko assign Kiya hai....wo faulty ya fir disconnect hua h

  • @activesystems4668
    @activesystems4668 2 ปีที่แล้ว +1

    if any demo with dxc-2 panel communication with usb lead cable

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      I will try

  • @নীলমেঘ-ষ৯ষ
    @নীলমেঘ-ষ৯ষ ปีที่แล้ว

    Is there any Institute from where i can get training&programming licesence?

  • @usmanali-xx3qe
    @usmanali-xx3qe 3 ปีที่แล้ว +1

    Bhai fire alarm ki cv kase bane kiya ap mujey cv bana kar de saktey hai

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Aapka jo bhi knowledge hai wo usmai daal dijiye..apny jis bhi fire panel p kaam kiya hai wo likh di jiye that's it

    • @usmanali-xx3qe
      @usmanali-xx3qe 3 ปีที่แล้ว

      @@Ansari29 mere pass 6 saal ka experience hai notifier ka agar ap bana de tu ap ka thanks

  • @ShivPujan-iq5dw
    @ShivPujan-iq5dw 5 หลายเดือนก่อน

    How to make cause and effect and delay time..

  • @omkardattsharma6336
    @omkardattsharma6336 ปีที่แล้ว

    Sir floor by floor hooter kse kre

  • @arunasarthi2334
    @arunasarthi2334 3 ปีที่แล้ว +1

    Sir two loop ka panel hai 1 loop sahi bta rha hai dusara loop me double address or divice fult batata hai cable ka continuity bhi check kar liya hu sab sahi hai ab kya karu jisase mera problem solve ho jaye

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Device faulty m aap device change kardo or double address k liye m aapko solution dyta hoo thoda w8 kijiye....

    • @arunasarthi2334
      @arunasarthi2334 3 ปีที่แล้ว

      @@Ansari29 divice change karne par bhi double address btata hai

  • @sarfraj9317
    @sarfraj9317 2 ปีที่แล้ว

    Honeywell notifier Id 3000 evacuate program. How to know plzz 🙏 one video for this .

  • @rabbualam8568
    @rabbualam8568 2 ปีที่แล้ว +1

    Hello sir new video kab dal rahe ho bahut din se intezar kar raha hu video ana ka daliye sir plz

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Hi Alam, yes bohot din sy video nhi upload kiya because kuch personal reasons sy time nhi mil pa raha hai... But jald hi videos upload hogy.... Apko kon sy topic par video chahiye... Mujhe bataye m try karta hoo...

    • @rabbualam8568
      @rabbualam8568 2 ปีที่แล้ว +1

      Thik h sir

  • @RohitKumar-ur5wn
    @RohitKumar-ur5wn 5 หลายเดือนก่อน

    75 alaram point hor device kasa aad kra

  • @amitkumarjha6174
    @amitkumarjha6174 4 หลายเดือนก่อน +1

    I have faults in my device and it is not erasing. Device not resetting. Plz help

    • @Ansari29
      @Ansari29  4 หลายเดือนก่อน

      Check that fault, may be Detectors faulty

  • @rabbualam8568
    @rabbualam8568 3 ปีที่แล้ว +1

    Sir aap se request ek video banai cctv camera ka installation ke bare plz

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Yes Sure, I will try to make video on said topic.

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Pls share my videos in your company group

    • @rabbualam8568
      @rabbualam8568 3 ปีที่แล้ว +1

      Plz sir video dalo cctv camera installation ka plz

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Yes Sure, thoda wait kijiye, jaisy time milyga bana k upload karuga ..

    • @rabbualam8568
      @rabbualam8568 3 ปีที่แล้ว +1

      Sir full setup ke sath video bana ke daliyega installation ka video bada v jayega to koi dikkat nahi thik h sir

  • @awadhrajpal2121
    @awadhrajpal2121 2 ปีที่แล้ว +1

    Dear Sir Please I hope ki aap mujhe address pattern programming zone detail me explain kigiye

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      I will try, I need system so that I can make a video on itm

  • @udaisinghbhati8590
    @udaisinghbhati8590 5 หลายเดือนก่อน

    Sir loop open circuit q dika rah h please solutions

  • @dubeyshyam7570
    @dubeyshyam7570 11 หลายเดือนก่อน

    Connfiguration fault kaise thik hota hai

  • @omprakashj3446
    @omprakashj3446 2 ปีที่แล้ว +1

    How many control modules can be installed in a single loop?

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      In Morley 99

    • @omprakashj3446
      @omprakashj3446 2 ปีที่แล้ว +1

      Whether number of modules which can be installed depends on manufacturer

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Yesss... But module is sufficient to give integration...

  • @sanarehman7342
    @sanarehman7342 2 ปีที่แล้ว +1

    How to rectify Duplicate address trouble

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Jo bhi duplicate aaraha hai pehly usko delete karo or for new device k option m jaky add karo solve hojayega

    • @sanarehman7342
      @sanarehman7342 2 ปีที่แล้ว +1

      @@Ansari29 loop Partial short, panel bhi change kar diya still same issue araa hai , double address ka bhi fault ara hai, delete ka koi option nahi hai edit hi kar sakte text wagera me, please suggest

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      @@sanarehman7342 make of the panel...? Pls share pic to me ansari2991@gmail.com

  • @uttamchaudhari7794
    @uttamchaudhari7794 ปีที่แล้ว

    New detector add karne ke liye programing kaise kare

  • @shankulkush658
    @shankulkush658 3 ปีที่แล้ว +1

    How to creat multiple zones in dxc panel

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว +1

      Level 3 m jaky aap loop select karky device ko zone number k hisab sy add karsakty..

  • @imbsr2221
    @imbsr2221 2 ปีที่แล้ว

    Hii sir this side bhaigirah mujhe morley ias addressble panel ko power device se Jodna tha jisse ki fire incident hone par light of ho Jaye uske liye mujhe panel me ek no to NC point chahiye tha please help me

  • @avaneeshkumar2902
    @avaneeshkumar2902 3 หลายเดือนก่อน +1

    Morley battery wiring fault and battery missing aa raha hai
    Plz help me.

    • @Ansari29
      @Ansari29  2 หลายเดือนก่อน

      Thermostat ko dono battery k bech m rakho

  • @HoseinSheykh
    @HoseinSheykh 7 หลายเดือนก่อน +1

    Hello, how are you? I have an urgent question about morley dx 2 is it possible for you to help me?

    • @Ansari29
      @Ansari29  7 หลายเดือนก่อน

      Tell me your doubt..??

    • @HoseinSheykh
      @HoseinSheykh 7 หลายเดือนก่อน

      johan it means dear

    • @HoseinSheykh
      @HoseinSheykh 7 หลายเดือนก่อน

      The output voltage of each 2 loops is 11 volts, is this correct?

  • @Daisy-hy2qp
    @Daisy-hy2qp 2 ปีที่แล้ว

    Sir pls tell us about how to provide power supply for FAS panel and hooters

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      External 24 VDV power supply

  • @premchand7173
    @premchand7173 2 ปีที่แล้ว +1

    How to smoke detector delete in panel

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Which panel...???

  • @ArifudinArif-in6tt
    @ArifudinArif-in6tt ปีที่แล้ว

    Sir output open circuit pls tell how to fix it

  • @DharmendraSharma-xn3lf
    @DharmendraSharma-xn3lf ปีที่แล้ว

    Dxc4 mi zone divide kaise karen

  • @manojkambli1647
    @manojkambli1647 ปีที่แล้ว

    How to program Patten in dxc panel

  • @NNK99
    @NNK99 2 ปีที่แล้ว

    Iss panel mein history log delete kaise karte hain please sir ??

  • @21rajmangade51
    @21rajmangade51 3 ปีที่แล้ว +1

    Fire damper per video bano na

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Ok I will try

  • @nakcreativestuido4272
    @nakcreativestuido4272 3 ปีที่แล้ว

    If we have old panel which is working on n loop we have to add more devices can we use auto learn for new device is the old address remove or not

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      You can add device & do Autolearn but make sure device address should not be repeated....

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Pls share my videos in your company group

  • @mohamedkamil4224
    @mohamedkamil4224 3 ปีที่แล้ว +1

    Assalammu alaikkum, In facp where should i take the loop connection to repeater panel.form which terminal of the facp.

    • @Ansari29
      @Ansari29  3 ปีที่แล้ว

      Use RS485 connection available in panel from point A & B to next panel point A & B. Use 2 core cable for it..I hope you have understood....

    • @mohamedkamil4224
      @mohamedkamil4224 3 ปีที่แล้ว

      @@Ansari29 Thank you, in notifier panel the supervisory terminal is there.from that terminal i have to give loop between facp and repeater or any other terminal ports are there?

  • @ismlkhn5635
    @ismlkhn5635 2 ปีที่แล้ว

    Morley fire alarm panel me languge change ka option kaha aata he mere fire panel me languge ka problem huwa he

  • @vijilprajapati3756
    @vijilprajapati3756 2 ปีที่แล้ว +1

    how to create master panel in fire alarm system in multiple panel

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      There is no need to create master panel, as company already provide different model for master & slave. We just connect in terminal

  • @R.K.bharat6399
    @R.K.bharat6399 2 หลายเดือนก่อน

    Hello sir kya hal h sir Honeywell MA 8000 ki programing ki kese krta h

    • @R.K.bharat6399
      @R.K.bharat6399 2 หลายเดือนก่อน

      Loop cut open ka fault kese check krta h

  • @avaneeshkumar2902
    @avaneeshkumar2902 3 หลายเดือนก่อน +1

    Hi Bhai ji

  • @z.m.chainal6736
    @z.m.chainal6736 6 หลายเดือนก่อน

    ❤❤❤

  • @candelcandel1361
    @candelcandel1361 2 ปีที่แล้ว

    how can i use mcp conventionel with morley dxc1 plase

  • @ShahbazHussain-iw6ol
    @ShahbazHussain-iw6ol 11 หลายเดือนก่อน

    Reset
    Restart kaise kare sir

  • @nestprotection9558
    @nestprotection9558 2 ปีที่แล้ว

    Sensitivity level kaise set krna h smoke detector ka

    • @vishallavate7507
      @vishallavate7507 2 ปีที่แล้ว

      Thank you Sir
      How to address old panel

  • @ibrahimkazi2320
    @ibrahimkazi2320 2 ปีที่แล้ว

    Can u teach me how program run in panel

  • @pathanmajidkhan1688
    @pathanmajidkhan1688 2 ปีที่แล้ว +1

    Level fault kese hatay

    • @Ansari29
      @Ansari29  2 ปีที่แล้ว

      Detector ka sensing level kam hogaya hai, pls replace asap

  • @adelalhaj9107
    @adelalhaj9107 2 หลายเดือนก่อน

    Please how to solve config checksum fail