SKIP TO 08:43 TO SEE THE FONTS AND MY THOUGHTS ABOUT THEM. Everything before 08:43 is concerning certain settings/timings and other things about each font in the package that you may want to adjust before using them.
14:45 FATHER V2 R1 made my jaw drop...If only the pandemic didn't screw up Sabertrio manufacturing. Hopefully i can nab my first saber this year.. I could practically envision that scene listening to that font!
The modifications Jesse Kirkbride did to the FatherV2 ANH version alone is worth the $10 for the font. Those new accent swing pairings are soooo good. I actually went back and re-watched the darth vader scenes in ANH, and compared to Jesse's soundfont mods. They are so close/accurate and so well produced. For folks using these fonts on Proffie, these are the WipeOut/WipeIn values Jesse uses (Lando goes over them for the CFX setup, too. Thanks Lando!) ANH is 600 out, 1000 in. ESB is 1000 out, 1060 in. ROTJ is 300 out, 1000 in. R1 is 1000 out, 450 in.
Thank you for this! Just downloaded and added to my damiensaber core and adjusted the times. Can’t wait to get my neopixel Anakin next week and drop this code in.
Thats s good font wirh a lot of goodies in it. I agree with you about labeling quotes as fclash's. I do the same with my cfx. Thanks for the video! Good stuff as always!
Thank you so much for the heads up and review, Kyberphonic makes great fonts and this has got to be the ultimate Vader compilation! If the Pach Store ever brings back the Ultimate Works MPP v1 and I'm fortunate enough to grab one, this package is going to be showcased. Also, a must have for an Vader collection is the duel font from Mountain Sabers called "Father and Son Rides"...it's Vaders Tie Fighter and Luke's X-Wing from ANH!
Shop all things Star Wars at Fathead! www.pjtra.com/t/2-422285-265388-137010?website=373524 Use code DSQSABERS20 to save 20% on new customer orders, PLUS free shipping at Dr. Squatch! www.pjatr.com/t/3-285017-265388-203365 Use my affiliate link at Jelly Belly for your gourmet candy needs! www.pntra.com/t/2-235887-265388-141030?website=373524
It's ridiculous value -- it's really impossible to say anything against it .... $2.50 per font for the v2 bits is just insane ... must have took him hour upon hour to get this compiled
It's all personal opinion but for me, JEJ's voice was at its most powerful and intimidating in ROTJ. The guy just growled those lines out like a lion gargling Jack Daniels.
Hey Lando. I don't know if you've messed around with the motion settings in the config file but if you go in and change hclash (clash threshold) to about 550 I've found it a lot easier to trigger clashes when hitting the blade or hilt with your hand. I think on my vektra it came set at 850. So I lowered it quite a bit. I've found at 550 clash is a lot more responsive and you can still swing it hard without it doing any ghost clashes. Just a suggestion.
I bought my 1st SaberTrio lightsaber & scheduled to arrive in February 2023 with CFX & would love to install the Vader font. I'm completely new to this. Will it work with my light saber?
In the Father_ESB font, I want the quote, "Obi-Wan never told you what happened to your father" to play first, followed by "No, I am your Father." So I was going to set the first quote as my font.wav, and the second as a preon. But I realized that won't work, because a preon always comes after a boot. So the only way to do it seems to be to ditch the preon, have the first quote as the font.wav, and then the second quote as a boot. However, for that to work, I have to restrict myself to only one boot sound, and I don't want to have to do that because I have a number of quotes that I want to use as boot sounds (which don't play sequentially). Any thoughts/suggestions? More general question: Is there a maximum number boot and pstoff sounds CFX will play, i.e., will it play the first few and then ignore the rest after a certain number? For example, if you have 8 boot sounds, will it only play say, the first 5 and ignore the last 3?
Thank you for this video, I love the content you put out! Could you by chance share with me or reference me somewhere the blade time settings you use for ksith’s krossguard, ( all 3 versions ) LS6 ( all 3 versions), Young Solo, and Reyflex ( Rey and Ben ) I know it’s a lot but I am new and I can’t find this information anywhere else. Thank you so much again!
All Kyberphonic font updates are free to those who bought it previously. Find the .rtf file that was provided when you bought the font and click that Dropbox link, it will take you to the updated version as well as the V1 version.
@@LandoSabers thank you so much! Also I have a question. Am I able to make a new font file and not have to replace an old one? I don’t know how and how to set the certain color for when it first ignites. Please let me know.
Hey Lando Sabers, I’ve been trying to download and move new soundfonts onto my Crimson Dawn Shrike- I was wondering if you have any advice as to how find the micro USB port on my saber. Love this new Vader update and I want to get it on my shrike as soon as possible. FYI I am closely watching your how to add sound fonts for profile guided video. Thanks for giving back to the community!
I bought the font, sounds are great. Am i missing something though? I can't find any blade style code anywhere for the authentic 'Vader' experience? just a whole host of sound files
Do you have any knowldge/experience with modifying the smoothswing/Accent swing values on a sound fonts config file? I have a Proffie setup, and CFX just seems to be so much more user friendly in that regard. I know with some of KSITH's fonts you can tune the sensitivity of when accent swings happen as well as other options. But im not really sure what I would need to change the values to. Just curious, thanks!
So I already bought his Father soundfont like a few months ago. If i understood correctly i can still get V2 (I still have the droplink. He said you should safe em for updates)... Is that correct?
hey lando, I have a sabertrio vektra and the blade is going bad, I was wondering where you'd recommend I go to buy a new blade or if I should wait for sabertrio's next open day i got the neopixle option forgot to mention
I recommend Bendu Armory’s blades if you live in the US, make sure you get the 1” diameter version though. You could always hit up Sabertrio and see if it’s covered under warranty and they may replace it.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
SKIP TO 08:43 TO SEE THE FONTS AND MY THOUGHTS ABOUT THEM.
Everything before 08:43 is concerning certain settings/timings and other things about each font in the package that you may want to adjust before using them.
What should I go for father or rouge by ksith
Darth vader slow ignition is so dope
14:45 FATHER V2 R1 made my jaw drop...If only the pandemic didn't screw up Sabertrio manufacturing. Hopefully i can nab my first saber this year.. I could practically envision that scene listening to that font!
The modifications Jesse Kirkbride did to the FatherV2 ANH version alone is worth the $10 for the font. Those new accent swing pairings are soooo good. I actually went back and re-watched the darth vader scenes in ANH, and compared to Jesse's soundfont mods. They are so close/accurate and so well produced. For folks using these fonts on Proffie, these are the WipeOut/WipeIn values Jesse uses (Lando goes over them for the CFX setup, too. Thanks Lando!)
ANH is 600 out, 1000 in.
ESB is 1000 out, 1060 in.
ROTJ is 300 out, 1000 in.
R1 is 1000 out, 450 in.
Just got my first saber today, great timing.
loved watching Kyberphonic make it live on Instagram, had such a good time hanging out with him :))
15:33, 17:21 "Oh it's beautiful"
Thank you for this! Just downloaded and added to my damiensaber core and adjusted the times. Can’t wait to get my neopixel Anakin next week and drop this code in.
Thats s good font wirh a lot of goodies in it. I agree with you about labeling quotes as fclash's. I do the same with my cfx. Thanks for the video! Good stuff as always!
Really enjoying this package bro, great vid as always! 🤘
Thank you so much for the heads up and review, Kyberphonic makes great fonts and this has got to be the ultimate Vader compilation! If the Pach Store ever brings back the Ultimate Works MPP v1 and I'm fortunate enough to grab one, this package is going to be showcased. Also, a must have for an Vader collection is the duel font from Mountain Sabers called "Father and Son Rides"...it's Vaders Tie Fighter and Luke's X-Wing from ANH!
Ordered it 2 days ago for my sons CD Proffie Osprey and my new DV3 ROTS . Can'twait to install it. Should be a bloody huge challenge.
Nice! When Jessie released this, i spent a lot of time redoing my hilts with the update! Fantastic explanation on how to set things up!
i know this video is 2 years old by now, but you have excellent taste in music my friend (and lightsaber fonts too, but thats a given XD)
Aaaaaand add to wishlist
I actually just grabbed this font yesterday it’s hype!
This is a really nice sound font!
Pure awesomeness Rogue 1 does it for me
Shop all things Star Wars at Fathead! www.pjtra.com/t/2-422285-265388-137010?website=373524
Use code DSQSABERS20 to save 20% on new customer orders, PLUS free shipping at Dr. Squatch! www.pjatr.com/t/3-285017-265388-203365
Use my affiliate link at Jelly Belly for your gourmet candy needs! www.pntra.com/t/2-235887-265388-141030?website=373524
SO GOOD
Great review Lando! Thanks for the info.
This is amazing I've been looking for a great Darth Vader light saber for my cosplay 😍😍😈😈
It's ridiculous value -- it's really impossible to say anything against it .... $2.50 per font for the v2 bits is just insane ... must have took him hour upon hour to get this compiled
I need that😥
Great video Lando
It's all personal opinion but for me, JEJ's voice was at its most powerful and intimidating in ROTJ.
The guy just growled those lines out like a lion gargling Jack Daniels.
Hey Lando. I don't know if you've messed around with the motion settings in the config file but if you go in and change hclash (clash threshold) to about 550 I've found it a lot easier to trigger clashes when hitting the blade or hilt with your hand. I think on my vektra it came set at 850. So I lowered it quite a bit. I've found at 550 clash is a lot more responsive and you can still swing it hard without it doing any ghost clashes. Just a suggestion.
Keep it up! Pretty cool review
I bought my 1st SaberTrio lightsaber & scheduled to arrive in February 2023 with CFX & would love to install the Vader font. I'm completely new to this. Will it work with my light saber?
Love your vids!
In the Father_ESB font, I want the quote, "Obi-Wan never told you what happened to your father" to play first, followed by "No, I am your Father." So I was going to set the first quote as my font.wav, and the second as a preon. But I realized that won't work, because a preon always comes after a boot. So the only way to do it seems to be to ditch the preon, have the first quote as the font.wav, and then the second quote as a boot. However, for that to work, I have to restrict myself to only one boot sound, and I don't want to have to do that because I have a number of quotes that I want to use as boot sounds (which don't play sequentially).
Any thoughts/suggestions? More general question: Is there a maximum number boot and pstoff sounds CFX will play, i.e., will it play the first few and then ignore the rest after a certain number? For example, if you have 8 boot sounds, will it only play say, the first 5 and ignore the last 3?
Thank you for this video, I love the content you put out! Could you by chance share with me or reference me somewhere the blade time settings you use for ksith’s krossguard, ( all 3 versions ) LS6 ( all 3 versions), Young Solo, and Reyflex ( Rey and Ben ) I know it’s a lot but I am new and I can’t find this information anywhere else. Thank you so much again!
Why the clash effect is blue?, In the movie they are more yellowish
It’S oKaY
LMAO
How did you get that soft flicker on the red blade? Mine is either too intense, or not enough to see it.
Are those fonts ok for a xenopixel saber? Because I'm new and I've already fucked up one time and I don't want to make the same mistake
I'm trying to find a good, reliable site to purchase a lightsaber (I've seen your other videos but are there any new sites that now sell them)
Hey so I bought this sound font about a month ago, would I be able to get the other fonts without buying it again?
All Kyberphonic font updates are free to those who bought it previously. Find the .rtf file that was provided when you bought the font and click that Dropbox link, it will take you to the updated version as well as the V1 version.
@@LandoSabers thank you so much! Also I have a question. Am I able to make a new font file and not have to replace an old one? I don’t know how and how to set the certain color for when it first ignites. Please let me know.
Hey Lando Sabers, I’ve been trying to download and move new soundfonts onto my Crimson Dawn Shrike- I was wondering if you have any advice as to how find the micro USB port on my saber. Love this new Vader update and I want to get it on my shrike as soon as possible. FYI I am closely watching your how to add sound fonts for profile guided video. Thanks for giving back to the community!
I bought the font, sounds are great. Am i missing something though? I can't find any blade style code anywhere for the authentic 'Vader' experience? just a whole host of sound files
…. That’s what SOUNDfonts are.
Which version R1 or ESB? Leave your opinions here?
@Lando Sabers, what you think?
Do you have any knowldge/experience with modifying the smoothswing/Accent swing values on a sound fonts config file? I have a Proffie setup, and CFX just seems to be so much more user friendly in that regard. I know with some of KSITH's fonts you can tune the sensitivity of when accent swings happen as well as other options. But im not really sure what I would need to change the values to. Just curious, thanks!
I’ve personally never messed with those settings, but you can check the CFX manual on Plecter Labs’ website
I don’t remember the exact posts, but Brian Conner has some info on this in the open source saber Facebook group
can use them with SNV4 card?
Where can I buy these sabers!
can i download these with my macbook
On the R1 sound font how do you get it to play the audio while it's running?
Depends on what soundboard you have.
@@LandoSabers I got cfx, followed your setup steps etc just dunno how to do that hallway scene you got.
hmm whats with the metallica folder? i didnt know you were a met fan \m/
Clone Hero, it’s a free PC remake of Guitar Hero
@@LandoSabers oh cool, also I bought a saberspro liberator with the inhilt LED, I'm hoping it's any good
So I already bought his Father soundfont like a few months ago. If i understood correctly i can still get V2 (I still have the droplink. He said you should safe em for updates)... Is that correct?
Yep
@@LandoSabers Nice 😊 I´ll look into it the next few days and update my lightsaber 😎
how do you install ?
hey lando, I have a sabertrio vektra and the blade is going bad, I was wondering where you'd recommend I go to buy a new blade or if I should wait for sabertrio's next open day
i got the neopixle option forgot to mention
😊
I got mine from Dark Wolf sabers.
They were fast shipping and very friendly.
129 for 32in if
Lando once promoted Bendu Armory and their blades. Maybe you could check them out? I don’t know much about them but it’s an option
@@eazyonewiththeforce i'll have to give them a look!!, thanks m8
I recommend Bendu Armory’s blades if you live in the US, make sure you get the 1” diameter version though.
You could always hit up Sabertrio and see if it’s covered under warranty and they may replace it.
Sheesh