This needs more views! Until this video, I hadn't even considered the possibility of frying my board with a charging cable! This is very important information that is rarely discussed, and needs to be more widely spread
I can’t overstate how invaluable this was for me being a Proffie noob. You make it seem 1,000% less daunting in a clear, concise fashion. Hats off to you, sir!
I have one ordered, I was going to get a cfx for obvious reasons, but they were sold out for the hilt/saber/whatever you call it. I went with a proffie just to be safe and finally get my hands on one. Do certain fonts not work on proffie boards?
Great vid bro! First method (the easy method) is the exact same method I used when I got my first proffie saber and done the same vid also because there were so many people asking on the r/lightsabers Reddit, it also works on the mew Xenopixel boards by the way which is awesome! Have you used the new Webusb interface yet? It’s sweet! At least until OS6 is available! 🤘
Just wanted to let you know that your a legend. I just got a saber and can’t wait to get started. You helped me 1000% on understanding the software 👌🏻🤘 May the force be with you
Lando, you made this so easy. I thought this was something I couldnt do ever, but following your video, I was able to get it done on first try. Especially easy on Mac. Thx man
I’m on mac as well, which method did you do? the first one or second? because i’m doing the second one but I’m stuck at a part that i need some help with
Thank you brother!!! Means a lot coming from you. Good luck on those upcoming installs, don’t forget to take a little break/vacation every once in a while 😂
This was the easiest video to follow on this subject so far. It's weird that they designed it in a way that the standard micro USB cable could possible cause damage but I'm really glad you mentioned that. I have a ton of them hanging around but most are probably from phones and Bluetooth headphones for charging so again I'm super glad you mentioned this! I hope you make more like this in the near future.
Thank you Paul! And yeah, it’s kinda sad that the current board does not support micro USB cable charging, but the Proffie V3 board (pending release hopefully this year) should support it, so mess ups with the wrong cable may actually be eliminated and go unpunished there. It makes it very convenient, and eliminates a bit of the risk, so that’s really nice in my opinion. But until then, we all have to be very careful with our cable management around the Proffie 2.2, I keep all of my data cables far away from all of my charging cables.
HI Lando Sabers! I got a Luke Skywalker Proffie lightsaber! I tried the easiest method that you showed us, now it plays the music and sound from The Mandalorian rescue! Thanks again!!!
Dude I just got my very first proffie saber early this month and your video has helped me tremendously. I haven't tried anything yet cuz I probably should buy a micro sd card first just to avoid any potential complications and then Imma search the web for some fonts. Cheers!
Was very disappointed by the quality of some of the sound fonts on the crimson proffie core, I decided to replace those sound fonts with better ones. Thank you so much for this helpful video!
Simply the best, always covering every detail, always unbiased, always a little longer than most people would probably prefer, but that's a small price to pay to have most every question answered.
This is going to be SOOOO helpful!!! The driver and flashing of the board is almost EXACTLY the same thing I had to learn to flash my iFlight controllers for the FPV drones I build. I was so worried about having to learn all this and had been told how horrible Proffie was but from the dfu comm connection, to the config flash, to the driver issues; this is all stuff I had to troubleshoot and learn with Betaflight and BLHeli for Flight controller and ESC flashing when I tune my quad!!! The coding part reminds me a lot of the stuff I had to code in Marlin for my 3Dprinter when I built it (All the way down to having a config.h file; which is no shock because my printer's mainboard uses an STM32 processor chipset as well). Its amazing how these hobbies follow so many similar pathways!!! Thank you SOOOO much!!! I cant wait to get my final parts in (Waiting for my TGS Hilt to come in and my Shapeways crystal for my Crystal Chamber) then i can finish up my ANH Graflex.
Just make sure when you go to flash the board, there’s a chance it won’t compile as I had drivers on my computer that tried to use my Proffie, so I had to go in and remove them, select the STM32Bootloader in Zadig and use WinUSB drivers so that my board would be recognized. Stuff like external controllers, racing sim software and hardware, etc. can mess with Proffie boards.
Thank you for this video I've just purchased my first Lightsaber I have gone balls deep and gone straight for a Graflex proffie neopixel, After watching all your and others videos I just had to have one. It's crazy I've been Star Wars mad since 1982 but never really thought about purchasing one until now I can see what they can do. I've done hours of research in to Proffie etc and found this probably the best one yet. Also thank you for all the other videos steering me clear of Ultrasabers and so on. MTFBWY
thank you for making it easier to understand. As a person who had to go off of 4-hour youtube videos and just reading the manual over the course of 16 hours, this helps others avoid the pain I went through. Also I never had an issue with cables, if it wasn't a data cable nothing happened for me. Would avoid using a non-data cable though. Better safe than sorry.
This is a great resource for Proffie beginners! Hopefully proffie doesn’t seem so scary to newbies after this. wish this was available when i started lmao
Thanks so much dude, this really helped. Small addition though for anyone having the same issue with the Port in Arduino. In a lot of cases too, The first time you do it, it doesn’t have to say ‘Proffieboard’, it most likely just says ‘COM3’ or ‘COM(X)’. Once you upload it to that the first time, the next time you plug in your board, it will start to say ‘Proffieboard’
@@UncleFromAnotherWorld I never ended up messing with the sound files. I was told by the manufacturer of my saber that it could possibly screw things up.
Shop all things Star Wars at Fathead! www.pjtra.com/t/2-422285-265388-137010?website=373524 Use code DSQSABERS20 to save 20% on new customer orders, PLUS free shipping at Dr. Squatch! www.pjatr.com/t/3-285017-265388-203365 Use my affiliate link at Jelly Belly for your gourmet candy needs! www.pntra.com/t/2-235887-265388-141030?website=373524
Bought myself a Proffie from Sabertrio two weeks ago (since they actually have something in stock) and realized I had no idea how to actually add sound effects. thanks for this video
thank you thankyou thankyou thankyou!!!!!!!!! took me just iver an hour to sort issues out but had my first 100% upload to my saber today and it all works :D extremely happy
This was incredibly helpful. I hadn't ever messed with the sabers before but after following this I had no issues. i spent the whole night last night removing some of the fonts i didnt like, and added some that i did. thanks for posting this, it was very helpful
This helped me get started so much. This video was an invaluable tool. And should be the go to video for anyone just starting to learn how to customize saber fonts and styles.
Here's where the fun begins...my Heirloom neopixel from Rebel Sabers is a Proffie; I'm not looking to adjust the blade styles for now, I just want to be able to add sound fonts. Glad I saw this to learn how easy it is; found the SD card, just gotta get a reader, and I'll be good to go.
So I did all of this and I am getting the "#include expects "FILENAME" or " error even though I have the name exactly correct and have followed all instructions perfectly. Now my sd file isn't showing up and the sound fonts no longer work on my lightsaber. Can you help?
13:55 If I have one board thats 2.2 and another that's 3.6, does that mean I have to go to Board Manager and remove 3.6 and install 2.2 and vise versa every time I want to upload fonts?
Anyone know how to fix my problem: My config that came on my SD card is a .txt file, not a .h file. So when I put it in the config folder of PROFFIEOS, it doesn’t work bc it’s the run file type
Your USB Cable link goes to "Rankie Micro Charging" is that stil lthe same cable? I have the issue that all the cables i see are data-charging cables, so i am screwed?
dude I messed up after I flashed it now I get static noise when i put in the battery and have light but no sound is there a way I can reset or even send it to someone trust worthy so they can do the fonts?
I think I see what could be a config file on mine, but there are 4 and they all have what looks like the same exact code on them. Which one should I put into Arduino IDE? Also, does it need 4 of them? If anyone can help, please let me know.
Dumb question: what if our original saber provider didn't include a Config H File in the SD card? I bought one off of Artsabers and I'm currently SOL as far as changing the blade styles for each of the included presets even if I swap out the sounds the easy way.
Yo mad props to this guy I was watching a different video a while back and told me the charging part at the end of the video luckily the charger was broken and couldn't fry my saber
The dirty way seems so fast and easy, just need to take note what you've switched with what. Got my first proffie baylan skoll saber, looking forward to switching up some fonts!
Is there still not a way to do this without plugging the board in directly? I managed to break of the micro USB port on my board due to making the mistake of sitting my saber next to me while plugged in with rowdy siblings... they run around, they bump the saber, off the table it goes, while still plugged in... YOINK... you get the idea.. I've been desperately trying to find a workaround for a couples years now....
I clicked the Amazon link for the data cable. They appear to be described as “high speed data and charging”. How can I be sure it won’t try to charge and leave me with a fried board?
Is there any difference for os 6.9 or 7.7 see everyone still recommending this video for adding fonts. i swear to god im doing the same copy paste and replace for the config but my presets are different and dont have the word at at the end. some are like Int>>>>()}, and some are ,TrWipeIn,Black>>>()},
I just purchased a proffie 2.2 lightsaber & I am struggling even after watching your video, I followed all the steps but I get stuck & can't find the config.h file at all.
Nice video. I hold onto a basic text file with my blade profiles by font. If I get a new saber or want to change one up, it’s just a matter of copy/pasting them to the config. Personally, I always have to use Zadig. Not a big deal, but it does make it a build requirement that I have access to the board. Must have access to the boot/reset buttons.
IDK what I'm doing wrong, I'm following the video step by step and I keep getting "error: #error Please set CONFIG_FILE as shown above. 53 | #error Please set CONFIG_FILE as shown above. | ^~~~~
Hey Guys I really need help. Cuz my TXQ aint came with an Config File. The one I got from somewhere else... I can't get them to work? whos able to help me? I would pay for it.
I'm at 25:42 and when I verify it says "Error compiling for board Proffieboard V2" and btw I got my saber from chrimson dawn and it has 6 config files named "CD1B_Saber28", "CD1B_Saber32" etc.
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
Just got my new saber, was wondering how I would be able to find my config file for my saber. I can't seem to find it and the only config file that shows says "installed=Mar 13 2021 22:32:31 volume=975 end=1" it's labeled "global" do i use this? i see no other config file with all the stuff that you see in the Aniflex file. Every other config file is shown in the fonts themselves but most of them dont have one, only two of the font files show 1-2 config files but match up to nothing like how the video shows. this is a cry for help.
Really depends on the build. Yes, some sabers have jank ass chassis designs that make it a pain to get the SD card out, but your basic LGT core only really requires taking out the battery and remembering the orientation it was last in(they even mark it for you on the chassis which side is negative).
This may be a stupid question, but do you need to still take out your micro SD card and use the card reader if the saber has a micro usb slot (eg. LGT sabers have accessible micro usb port for charging). Can fonts etc be transferred that way with a data cable or is it solely for charging and you still need to change things via the reader and card itself?
To the people watching this video and wondering if the usb cable sabertrio provides works for proffie. IT DOESNT!!!! it will fry your board. I learned the hard way.
So I got the Thunder God from kyberphonic... how do I get the saber style? From what I see in this video I need to go build my own, but I dont want to, I just want the one I payed 10 bucks for? Im a bit lost
You paid for a SOUND font, not a BLADE style. Two separate things, as I very explicitly explained in the video. You can get blade styles from Fett263’s library for Proffie or Crystal Focus Net if you have a CFX saber. It’s not up to the font maker to provide one for you, because they would have to update the blade style if there are OS updates for the soundboards. They just make the sounds, not the effects.
@@LandoSabers hey so I got some fonts and styles from Greyscale, I copied the styles exactly yet Im still getting an effor when verifying. All the code is right so im not sure why im getting an issue. proffie 5.7 doesnt seem like exists any more, and ive tried this on both 6.7 and 5.9, no luck
Can u do an update video for 2023 on how to upload sound fonts? My Sabertrio is Skylar hilt with a 2.2 version proffie board. Has it gotten easier or difficult to add changed sound your Sabertrio light saber?
I am unable to get past 25:50 , I was getting and error regarding my Sabertrio config file that I was editing that read>> #include"../props/s3button_config.h I ended up putting this exact file in my Props folder for the ProffieOS file but now when verifying I get a whole host of errors pertaining to how certain commands are named. Im sure there may be an updated tutorial in the future but would you or anybody be able to help me fix this? If not ill be okay with the quick-dirty way..though would id really like to fully utilize some of the fonts ive bought like Supernova from Jaydolorian :(
Hey buddy. How would you feel about redacting the "charging only" cable part? It's constantly a battle when trying to support new users now a year later. Also, 8 character limit is for Teensysabers only.
Hey lando! Just want to thank you for the amazing and informative content. Your info led me to purchase a shade v2, and I'm pumped to get started in the saber community! (And a bit nervous about editing the profiles😅)
Nice I got the proffie neopixel shade aswell, amazing saber. I wanted to add more fonts to it but realised that adding fonts on proffies are not very user friendly for people, especially newbies like me.
@@blake_1146 I'm not going to lie, I was so happy when I got it. But only a week after, the audio started to crackle, pop, and cut out after a few seconds. I will credit them, their customer support got to me very quick and suggested I ship it back. So we will see how it goes.
@@wombatfour372 for me the audio is only slightly crackly on some of the fonts when you swing it hard, do you have the proffie neopixel version? If you do the one we have is like literally the cheapest proffie neopixel you can buy anywhere, so I wouldn’t expect top notch sound from it. Where are you based by the way?
@@blake_1146 Hey, sorry I diddnt notice this reply until now. I do have a neopixel, and what I mean by crackle is it actually had decent audio for the price, but when I turn on my saber it crackles and literally POPS for a few seconds, then turns off. Finally getting around to getting it handles though.
I’ve just ordered my first proffie lightsaber and I want to put some sound fonts/blade effects on it. This video was very informative but I’m still nervous of screwing the coding and breaking it
If you don’t mind sharing, where exactly did you get your proffie saber? I’m interested in getting my first one but the sound I found for one needs to be a proffie saber.
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
Im having a confusing issue. Once i verify my config and plug in my proffieboard it comes up as butterfly-l433cc. I will go to board and select proffieboard v2 and it will show proffieboard v2 on com3 in the bottom right corner of the program. Once the sketch begins to download to the board it will then say proffieboard v2 not connected but yet it will go through the whole download procedure and i will get an alert from the saber once its done but yet i will not have the new sound font and blade style when i go to test it.
I did all the steps it doesn’t work I have vader but not right colour and my other vader doesn’t work and my kylo one I replaced with vader says font directory Not found help!!!!!!!!!!!!!!!!
This doesn't work for me, and idk why. I've tried like 5 times, following step by step through the video. And because it successfully worked, I feel like I've been ripped with the lightsaber I bought and the Saber sounds/effects too from the website for downloading new effects and sounds.
I supose you can add a new folder and just add a new line in your roots config file without deleting other folders right? Or do you have a limited number of entries?
Can you not change the name of the QuiGon folder to just Yoda? To avoid confusion when you go back into it? Is this possible when you update it on the Config file AND the corresponding folder?
I dont understand. There is no config file on my sd card and you said thats okay they might not put it there so it is flashed onto the proffie borad but how do i get the config file then?
I am seriously struggling with arduino. I keep getting error 51. I have no idea what I'm doing wrong here I'm following your video to the tee and everytime I hit verify it always stops at 51
Is it possible to change the color that the blade makes when flash on clash is activated using the easy way? I'm trying to change the flash on clash color from white to orange/yellowish color for my luke skywalker sound font
Every time I copy the blade style and paste it into the config, it is written differently than the rest I guess because arduino keeps showing error message when I verify. It only works if I copy an existing blade style and change it a little. Please help
I already feel better knowing Lando's fried a saber just like all of us.
I wanted to be able to feel the pain. It was very felt.
How do you know if the board is fried? Are there any indicators?
@@seaslicks You'll smell it, haha
My first 2 lightsabers fried as soon as I plugged them in
@@zaowinslow487 is it because you used a power cable not a “data” cable
This needs more views! Until this video, I hadn't even considered the possibility of frying my board with a charging cable! This is very important information that is rarely discussed, and needs to be more widely spread
This should be the #1 Proffie set up video everybody watches first. Best one I've watched and super easy to follow. Great job man.
I can’t overstate how invaluable this was for me being a Proffie noob. You make it seem 1,000% less daunting in a clear, concise fashion. Hats off to you, sir!
I have one ordered, I was going to get a cfx for obvious reasons, but they were sold out for the hilt/saber/whatever you call it. I went with a proffie just to be safe and finally get my hands on one.
Do certain fonts not work on proffie boards?
PLEASE WATCH THE VIDEO AND READ THE DESCRIPTION BEFORE ASKING QUESTIONS!
Great vid bro! First method (the easy method) is the exact same method I used when I got my first proffie saber and done the same vid also because there were so many people asking on the r/lightsabers Reddit, it also works on the mew Xenopixel boards by the way which is awesome! Have you used the new Webusb interface yet? It’s sweet! At least until OS6 is available! 🤘
Just wanted to let you know that your a legend. I just got a saber and can’t wait to get started. You helped me 1000% on understanding the software 👌🏻🤘 May the force be with you
My cable says it's a "Charge and sync cable." It's USB C to USB C. Is it safe? Is the charger that came WITH the lightsaber safe?
i purchased an ultimate works saber but it did not come with a config file how to I get that file? i'm stuck without it.
@@Flajnut I have the same Issue! Lando could you help us with this?
Lando, you made this so easy.
I thought this was something I couldnt do ever, but following your video, I was able to get it done on first try. Especially easy on Mac. Thx man
I’m on mac as well, which method did you do? the first one or second? because i’m doing the second one but I’m stuck at a part that i need some help with
I’m on a Mac but my brain did not understand anyone able to help
Excellent video. I watched the whole thing and found it to be very informative form A to Z man. I’ll be referencing customers to this. Thank you
Thank you brother!!! Means a lot coming from you. Good luck on those upcoming installs, don’t forget to take a little break/vacation every once in a while 😂
My CrimsonDawn Saber literally just came in today and this vid just came on my feed.
This was the easiest video to follow on this subject so far. It's weird that they designed it in a way that the standard micro USB cable could possible cause damage but I'm really glad you mentioned that. I have a ton of them hanging around but most are probably from phones and Bluetooth headphones for charging so again I'm super glad you mentioned this!
I hope you make more like this in the near future.
Thank you Paul! And yeah, it’s kinda sad that the current board does not support micro USB cable charging, but the Proffie V3 board (pending release hopefully this year) should support it, so mess ups with the wrong cable may actually be eliminated and go unpunished there. It makes it very convenient, and eliminates a bit of the risk, so that’s really nice in my opinion. But until then, we all have to be very careful with our cable management around the Proffie 2.2, I keep all of my data cables far away from all of my charging cables.
Can you do an updated video for ProffieOS 6.7 pleaseeeee
HI Lando Sabers! I got a Luke Skywalker Proffie lightsaber! I tried the easiest method that you showed us, now it plays the music and sound from The Mandalorian rescue! Thanks again!!!
Dude I just got my very first proffie saber early this month and your video has helped me tremendously. I haven't tried anything yet cuz I probably should buy a micro sd card first just to avoid any potential complications and then Imma search the web for some fonts. Cheers!
Was very disappointed by the quality of some of the sound fonts on the crimson proffie core, I decided to replace those sound fonts with better ones. Thank you so much for this helpful video!
Simply the best, always covering every detail, always unbiased, always a little longer than most people would probably prefer, but that's a small price to pay to have most every question answered.
This is going to be SOOOO helpful!!! The driver and flashing of the board is almost EXACTLY the same thing I had to learn to flash my iFlight controllers for the FPV drones I build. I was so worried about having to learn all this and had been told how horrible Proffie was but from the dfu comm connection, to the config flash, to the driver issues; this is all stuff I had to troubleshoot and learn with Betaflight and BLHeli for Flight controller and ESC flashing when I tune my quad!!! The coding part reminds me a lot of the stuff I had to code in Marlin for my 3Dprinter when I built it (All the way down to having a config.h file; which is no shock because my printer's mainboard uses an STM32 processor chipset as well). Its amazing how these hobbies follow so many similar pathways!!! Thank you SOOOO much!!! I cant wait to get my final parts in (Waiting for my TGS Hilt to come in and my Shapeways crystal for my Crystal Chamber) then i can finish up my ANH Graflex.
Just make sure when you go to flash the board, there’s a chance it won’t compile as I had drivers on my computer that tried to use my Proffie, so I had to go in and remove them, select the STM32Bootloader in Zadig and use WinUSB drivers so that my board would be recognized.
Stuff like external controllers, racing sim software and hardware, etc. can mess with Proffie boards.
Thank you for this video I've just purchased my first Lightsaber I have gone balls deep and gone straight for a Graflex proffie neopixel, After watching all your and others videos I just had to have one. It's crazy I've been Star Wars mad since 1982 but never really thought about purchasing one until now I can see what they can do.
I've done hours of research in to Proffie etc and found this probably the best one yet. Also thank you for all the other videos steering me clear of Ultrasabers and so on. MTFBWY
thank you for making it easier to understand. As a person who had to go off of 4-hour youtube videos and just reading the manual over the course of 16 hours, this helps others avoid the pain I went through.
Also I never had an issue with cables, if it wasn't a data cable nothing happened for me. Would avoid using a non-data cable though. Better safe than sorry.
This is a great resource for Proffie beginners! Hopefully proffie doesn’t seem so scary to newbies after this. wish this was available when i started lmao
Thanks so much dude, this really helped. Small addition though for anyone having the same issue with the Port in Arduino. In a lot of cases too, The first time you do it, it doesn’t have to say ‘Proffieboard’, it most likely just says ‘COM3’ or ‘COM(X)’. Once you upload it to that the first time, the next time you plug in your board, it will start to say ‘Proffieboard’
So glad I found this video. Just purchased a saber with Proffie and would have had no idea about the USB cable. Picked up the usb you recommended.
i plugged the usb he recomended in and the lightsaber made a weird noise did that happen with you?
@@UncleFromAnotherWorld I never ended up messing with the sound files. I was told by the manufacturer of my saber that it could possibly screw things up.
Shop all things Star Wars at Fathead! www.pjtra.com/t/2-422285-265388-137010?website=373524
Use code DSQSABERS20 to save 20% on new customer orders, PLUS free shipping at Dr. Squatch! www.pjatr.com/t/3-285017-265388-203365
Use my affiliate link at Jelly Belly for your gourmet candy needs! www.pntra.com/t/2-235887-265388-141030?website=373524
Read that thumbnail as “how to add profanity soundfonts to a lightsaber.” Now I want a font where the clash noise is Sebulba yelling “Poodoo!” 😂
I just bought my crimson dawn proffie board, this video definitely helped broaden my knowledge a bit more.
Bought myself a Proffie from Sabertrio two weeks ago (since they actually have something in stock) and realized I had no idea how to actually add sound effects. thanks for this video
I also have a new proffie from sabertrio and still feel a bit overwhelmed. I cannot find a killswitch on mine anywhere. You?
@@culp22 its the little black toggle switch next to the charging port. sorry i took so long to reply
I cannot express my gratidute, It took me sitting down and truley trying to learn proffie, and you made it so much easier man. Thank you so so much!
I've been looking forward to this. My proffie sabers have doubled since the last soundboard tutorial.
Spelled doubled wrong, had to fix because ocd
thank you thankyou thankyou thankyou!!!!!!!!! took me just iver an hour to sort issues out but had my first 100% upload to my saber today and it all works :D extremely happy
This was incredibly helpful. I hadn't ever messed with the sabers before but after following this I had no issues. i spent the whole night last night removing some of the fonts i didnt like, and added some that i did. thanks for posting this, it was very helpful
where can you download new fonts?
Sweet! I just got my first proffie saber from Korbanth, this is useful. Thanks Lando! Gonna give you props on my unboxing and review!
Thank you so much I was completely lost without this video as I just bought my first proffie neopixel. I really appreciate it!
You sir, are an absolute legend. Thanks to your great video I was able to install new fonts and styles on my weathered Starkiller. Thanks again man!
This helped me get started so much. This video was an invaluable tool. And should be the go to video for anyone just starting to learn how to customize saber fonts and styles.
Here's where the fun begins...my Heirloom neopixel from Rebel Sabers is a Proffie; I'm not looking to adjust the blade styles for now, I just want to be able to add sound fonts. Glad I saw this to learn how easy it is; found the SD card, just gotta get a reader, and I'll be good to go.
Don't own a proffie, but was generally curious. Very informative video.
Great video.
Just got my first proffie 2.2 and this is a life saver.
Thanks brother
Another great video Lando. I'm really digging proffie and I can't wait until OS6 drops.
Bruh, you saved my cosplay
Thank you so much for this detailed tutorial!
Dag it actually worked. Mad props 💯 thanks bro mad respect
You are the best mate, I had trouble for hours and your video saved me, I can't thank you enough dude. Thanks Sooo Much
So I did all of this and I am getting the "#include expects "FILENAME" or " error even though I have the name exactly correct and have followed all instructions perfectly. Now my sd file isn't showing up and the sound fonts no longer work on my lightsaber. Can you help?
13:55 If I have one board thats 2.2 and another that's 3.6, does that mean I have to go to Board Manager and remove 3.6 and install 2.2 and vise versa every time I want to upload fonts?
Anyone know how to fix my problem:
My config that came on my SD card is a .txt file, not a .h file. So when I put it in the config folder of PROFFIEOS, it doesn’t work bc it’s the run file type
I’m going to have to watch this video 10 times over again
This is incredible! I learned a lot and have since looked up Profile 6 because you said it was coming out. Thank you!
Your USB Cable link goes to "Rankie Micro Charging" is that stil lthe same cable? I have the issue that all the cables i see are data-charging cables, so i am screwed?
dude I messed up after I flashed it now I get static noise when i put in the battery and have light but no sound is there a way I can reset or even send it to someone trust worthy so they can do the fonts?
Yes there is.
I think I see what could be a config file on mine, but there are 4 and they all have what looks like the same exact code on them. Which one should I put into Arduino IDE? Also, does it need 4 of them? If anyone can help, please let me know.
what if you dont have a config file?
Exactly this. Artsabers doesn't include the config H file with their sabers for some asinine reason 💀
Dumb question: what if our original saber provider didn't include a Config H File in the SD card? I bought one off of Artsabers and I'm currently SOL as far as changing the blade styles for each of the included presets even if I swap out the sounds the easy way.
Yo mad props to this guy I was watching a different video a while back and told me the charging part at the end of the video luckily the charger was broken and couldn't fry my saber
The dirty way seems so fast and easy, just need to take note what you've switched with what. Got my first proffie baylan skoll saber, looking forward to switching up some fonts!
the video we have all been waiting for, LEGENDARY
I had a feeling that file replacement was possible, glad to know I wasn't wrong. That's the method I'll be using until autoconfig update is a thing.
is there an updated version of this tutorial?
Is there still not a way to do this without plugging the board in directly? I managed to break of the micro USB port on my board due to making the mistake of sitting my saber next to me while plugged in with rowdy siblings... they run around, they bump the saber, off the table it goes, while still plugged in... YOINK... you get the idea.. I've been desperately trying to find a workaround for a couples years now....
Very concise and clear. There weren't any points were I was confused. Solid tutorial man 👍
I clicked the Amazon link for the data cable. They appear to be described as “high speed data and charging”. How can I be sure it won’t try to charge and leave me with a fried board?
Hi quick question with Darth vader V2 Soundfont how do i replace Kylo with that?
Is there any difference for os 6.9 or 7.7 see everyone still recommending this video for adding fonts.
i swear to god im doing the same copy paste and replace for the config but my presets are different and dont have the word at at the end. some are like Int>>>>()}, and some are ,TrWipeIn,Black>>>()},
I just purchased a proffie 2.2 lightsaber & I am struggling even after watching your video, I followed all the steps but I get stuck & can't find the config.h file at all.
Nice video. I hold onto a basic text file with my blade profiles by font. If I get a new saber or want to change one up, it’s just a matter of copy/pasting them to the config.
Personally, I always have to use Zadig. Not a big deal, but it does make it a build requirement that I have access to the board. Must have access to the boot/reset buttons.
Yeah that’s a bit unfortunate, but it’s always nice to have full access to the board even if you don’t have to use the boot/reset buttons.
IDK what I'm doing wrong, I'm following the video step by step and I keep getting "error: #error Please set CONFIG_FILE as shown above.
53 | #error Please set CONFIG_FILE as shown above.
| ^~~~~
I am having the exact same problem!
@@MichSciFi10 I figured it out. You have to remove the two "//" on line 24
@@jorgeestrada9828I’ll have to try this!
@@jorgeestrada9828dang. My line 24 is just a box that describes something that takes up a few lines
Hey Guys I really need help. Cuz my TXQ aint came with an Config File. The one I got from somewhere else... I can't get them to work? whos able to help me? I would pay for it.
Legend. Thank you kind sir.
Can you make an updated video on how to add sound fonts to proffie
I'm at 25:42 and when I verify it says "Error compiling for board Proffieboard V2" and btw I got my saber from chrimson dawn and it has 6 config files named "CD1B_Saber28", "CD1B_Saber32" etc.
ABSOLUTLEY BEST TUTORIAL. THANK YOU!!!!!
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
Just got my new saber, was wondering how I would be able to find my config file for my saber. I can't seem to find it and the only config file that shows says "installed=Mar 13 2021 22:32:31
volume=975
end=1"
it's labeled "global" do i use this? i see no other config file with all the stuff that you see in the Aniflex file. Every other config file is shown in the fonts themselves but most of them dont have one, only two of the font files show 1-2 config files but match up to nothing like how the video shows. this is a cry for help.
at 4:24, how do i get the file to pop up on my screen. I am using the data cable method
Crazy to me proffie prides themselves on “everything is possible” meanwhile you have to risk destroying the electronics just to get the sd card out
Holy hell seriously
Can I use any saber that has a SD card like from imperial workshop
Really depends on the build. Yes, some sabers have jank ass chassis designs that make it a pain to get the SD card out, but your basic LGT core only really requires taking out the battery and remembering the orientation it was last in(they even mark it for you on the chassis which side is negative).
This may be a stupid question, but do you need to still take out your micro SD card and use the card reader if the saber has a micro usb slot (eg. LGT sabers have accessible micro usb port for charging). Can fonts etc be transferred that way with a data cable or is it solely for charging and you still need to change things via the reader and card itself?
Is it possible to add the twist on off control to a neopixel saber that doesn't have this option active?
To the people watching this video and wondering if the usb cable sabertrio provides works for proffie. IT DOESNT!!!! it will fry your board. I learned the hard way.
So I got the Thunder God from kyberphonic... how do I get the saber style? From what I see in this video I need to go build my own, but I dont want to, I just want the one I payed 10 bucks for? Im a bit lost
You paid for a SOUND font, not a BLADE style. Two separate things, as I very explicitly explained in the video. You can get blade styles from Fett263’s library for Proffie or Crystal Focus Net if you have a CFX saber.
It’s not up to the font maker to provide one for you, because they would have to update the blade style if there are OS updates for the soundboards. They just make the sounds, not the effects.
@@LandoSabers hey so I got some fonts and styles from Greyscale, I copied the styles exactly yet Im still getting an effor when verifying. All the code is right so im not sure why im getting an issue. proffie 5.7 doesnt seem like exists any more, and ive tried this on both 6.7 and 5.9, no luck
Can u do an update video for 2023 on how to upload sound fonts? My Sabertrio is Skylar hilt with a 2.2 version proffie board. Has it gotten easier or difficult to add changed sound your Sabertrio light saber?
I don’t have this aniflex config file on my sd card. What should I do now?
I am unable to get past 25:50 , I was getting and error regarding my Sabertrio config file that I was editing that read>>
#include"../props/s3button_config.h
I ended up putting this exact file in my Props folder for the ProffieOS file but now when verifying I get a whole host of errors pertaining to how certain commands are named.
Im sure there may be an updated tutorial in the future but would you or anybody be able to help me fix this?
If not ill be okay with the quick-dirty way..though would id really like to fully utilize some of the fonts ive bought like Supernova from Jaydolorian :(
Hey buddy. How would you feel about redacting the "charging only" cable part? It's constantly a battle when trying to support new users now a year later.
Also, 8 character limit is for Teensysabers only.
Me, not owning a Proffie saber or a sound font:
Ah yes, what a video to watch at midnight.
Hey lando! Just want to thank you for the amazing and informative content. Your info led me to purchase a shade v2, and I'm pumped to get started in the saber community! (And a bit nervous about editing the profiles😅)
Nice I got the proffie neopixel shade aswell, amazing saber. I wanted to add more fonts to it but realised that adding fonts on proffies are not very user friendly for people, especially newbies like me.
@@blake_1146 I'm not going to lie, I was so happy when I got it. But only a week after, the audio started to crackle, pop, and cut out after a few seconds. I will credit them, their customer support got to me very quick and suggested I ship it back. So we will see how it goes.
@@blake_1146 just a heads up as to a possible difficulty
@@wombatfour372 for me the audio is only slightly crackly on some of the fonts when you swing it hard, do you have the proffie neopixel version? If you do the one we have is like literally the cheapest proffie neopixel you can buy anywhere, so I wouldn’t expect top notch sound from it. Where are you based by the way?
@@blake_1146 Hey, sorry I diddnt notice this reply until now. I do have a neopixel, and what I mean by crackle is it actually had decent audio for the price, but when I turn on my saber it crackles and literally POPS for a few seconds, then turns off. Finally getting around to getting it handles though.
Does this video still apply? ProffieOS now says download 6.7 where it use to say 5.7
yes this video is still applicable, i recently used ProffieOS6.7. to edit my saber blade, if you have questions just comment below
@@Lurkai how do i get a config
I’ve just ordered my first proffie lightsaber and I want to put some sound fonts/blade effects on it. This video was very informative but I’m still nervous of screwing the coding and breaking it
Same
If you don’t mind sharing, where exactly did you get your proffie saber? I’m interested in getting my first one but the sound I found for one needs to be a proffie saber.
Amazing vid. I read a whole bunch of scary jibberish online, and your vid cleared everything up! Ty !
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
thanks for the proffie board version tip .
Im having a confusing issue. Once i verify my config and plug in my proffieboard it comes up as butterfly-l433cc. I will go to board and select proffieboard v2 and it will show proffieboard v2 on com3 in the bottom right corner of the program. Once the sketch begins to download to the board it will then say proffieboard v2 not connected but yet it will go through the whole download procedure and i will get an alert from the saber once its done but yet i will not have the new sound font and blade style when i go to test it.
Is there a way to adjust the clash sensitivity? my saber keeps clashing just by swinging the gently twirling the blade around.
I have the same problem, hoping someone sees, and replies with a solution
I did all the steps it doesn’t work I have vader but not right colour and my other vader doesn’t work and my kylo one I replaced with vader says font directory
Not found help!!!!!!!!!!!!!!!!
This doesn't work for me, and idk why. I've tried like 5 times, following step by step through the video. And because it successfully worked, I feel like I've been ripped with the lightsaber I bought and the Saber sounds/effects too from the website for downloading new effects and sounds.
I supose you can add a new folder and just add a new line in your roots config file without deleting other folders right? Or do you have a limited number of entries?
Can you not change the name of the QuiGon folder to just Yoda? To avoid confusion when you go back into it? Is this possible when you update it on the Config file AND the corresponding folder?
Took me a few times to iron out all the kinks, but thank you so much for this video!
So if I have a character saber and all I want is one font for it, is it just a matter of deleting everything except what I want off of the SD card?
Hi I'm not sure to understand can we do it with sd card only on computer or it's to obligate to connect saber with cable on computer?
You should make another one of these for Proffie OS 6.7! Love watching your vids and would love to follow along with you
I dont understand. There is no config file on my sd card and you said thats okay they might not put it there so it is flashed onto the proffie borad but how do i get the config file then?
I am seriously struggling with arduino. I keep getting error 51. I have no idea what I'm doing wrong here I'm following your video to the tee and everytime I hit verify it always stops at 51
Would you consider making a video for xenopixel fonts and or removing rainbow blade
Is it possible to change the color that the blade makes when flash on clash is activated using the easy way? I'm trying to change the flash on clash color from white to orange/yellowish color for my luke skywalker sound font
Where do I get an aniflex config? Mine didn't come with mine
Every time I copy the blade style and paste it into the config, it is written differently than the rest I guess because arduino keeps showing error message when I verify. It only works if I copy an existing blade style and change it a little. Please help