#classdamplifier

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ธ.ค. 2022
  • #classdamplifier एम्पलीफायर में आग क्यों लगती है ? Causes and prevention.
    There may be various reasons for catastrophic failure of Class D amplifier IC. In this video I have discussed few and provided solutions for the same. Take the benefit of video if you are also suffering from the said problem.
    Buy it from here:यहाँ से क्लिक करके ख़रीदे
    inkocean.in/products/ink202-i...
    inkocean.in/products/lm3886-s...
    amzn.to/3U2iS1c
    inkocean.in/collections/ampli...
    inkocean.in/collections/ampli...
    amzn.to/3Uk4P6J
    amzn.to/3fvmCct
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 140

  • @niyaz566
    @niyaz566 ปีที่แล้ว +3

    Hello sir..
    Aapka mai aapka video itna pasand karta hu ki har do char din me mujhe chack karna padta hai ki koi video aapne daala hoga. .kyo ki.Aapke jaisa knowledge kisi ki video dekhne se nahi milta.... Thankyou

  • @thevenomytgaming9470
    @thevenomytgaming9470 วันที่ผ่านมา

    100% true knowledge
    Love from pak❤

  • @PawanYadav-yn9jx
    @PawanYadav-yn9jx ปีที่แล้ว +2

    Very powerful jankari

  • @glxdolphin1003
    @glxdolphin1003 ปีที่แล้ว +4

    3:48 Pahle to laga advertisement aayi, fir pata chala ye to twist tha 😂😂😂

  • @pramodharode6958
    @pramodharode6958 ปีที่แล้ว +1

    Bahot achi jankari sir

  • @yagneshpatel1183
    @yagneshpatel1183 6 หลายเดือนก่อน

    way better video than i thought.....

  • @vipuljoshi8474
    @vipuljoshi8474 ปีที่แล้ว +1

    Sabse main reason k liye main wait kr ra tha jo maine aj tk mere banaye amps k failure main notice kiya h. Wo ye h kajkl mostly log mobile se music play krte h... jis se unwanted RF enter kr jati h aur oscillations create krti h. Iska best solution h bluetooth board ko use kare.

  • @SurajDas-cv8rb
    @SurajDas-cv8rb ปีที่แล้ว +1

    Good idea,Sir 👍👍👍👍👍👍👍

  • @laxmanmestry3405
    @laxmanmestry3405 ปีที่แล้ว

    Thanks for information sir 🙏🏼😌

  • @kenvithapa5189
    @kenvithapa5189 ปีที่แล้ว +1

    Very good 👍

  • @roshangaikwad9714
    @roshangaikwad9714 ปีที่แล้ว +1

    Thanks sir👍👍👍

  • @ZenSecGaming
    @ZenSecGaming ปีที่แล้ว +1

    Thank you sir 🥰

  • @A2Aelectronic
    @A2Aelectronic ปีที่แล้ว

    Nice explanation sir

  • @AnuPam_2006
    @AnuPam_2006 ปีที่แล้ว

    Very interesting topic discussed today. Pls ek Class A amplifier banaiye .

  • @Ankit.Uk08
    @Ankit.Uk08 ปีที่แล้ว

    Bahut sahi batya sir aapne 10.20 par

  • @diydudeindia8264
    @diydudeindia8264 ปีที่แล้ว +1

    Thanks for the valuable information mere paas tda8954th mono hai uska 1side ka inductor bohot zyada overheat ho Raha hai kya check karna chahiye

  • @ashutoshpattnaik9721
    @ashutoshpattnaik9721 ปีที่แล้ว +1

    Main jhukega nhi sala 😂😂
    Ye acha tha sirr...

  • @sunil_ultra
    @sunil_ultra ปีที่แล้ว +8

    The golden 14:30 second video with lot of knowledge knowledge thank you sir 🙏

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว +5

      So nice of you

    • @surajPowerzone4815
      @surajPowerzone4815 ปีที่แล้ว

      Sir please apna number dijiye apse jaruri baat karna hai

  • @sarifullaskar1726
    @sarifullaskar1726 ปีที่แล้ว

    Sabse pehle apka bohut bohut shukhriya sir eisi knowledgeful video ke liye... apka videos dekh kar maine ek amplifier banaya hai jo perfect output deta hai aur almost noise free hai.. yeh apke wajeh se possible hua hai..lekin ek sawal aapse aur hai. Aapne is video me jo fuse lagane ko bola hai woh kahan par lagau.. ac power line me ya smps to amp power line me?
    Please bataiyen

  • @drrandhawa5512
    @drrandhawa5512 ปีที่แล้ว +4

    Ye Class D ics Analog Pcb me aya tho kamjab ho g ... Ic wale Amplifier me SMD Circuit jada kamjab nahi hai ... Mosfet IRS2092 Wale Class D me SMD Circuit kamjab Sirf Driver stage me or jha low Ampair Current flow hota hai ...

  • @gordhanramkhoja4318
    @gordhanramkhoja4318 ปีที่แล้ว

    Jai hind sir

  • @pramodwelekar8586
    @pramodwelekar8586 ปีที่แล้ว +1

    Happy new year sirji 2023

  • @JK-pz1gr
    @JK-pz1gr ปีที่แล้ว

    Thanks 🙏

  • @anywaytechkidzo-mania6139
    @anywaytechkidzo-mania6139 11 หลายเดือนก่อน

    Please suggest the best amplifier for home use

  • @musicmagic1991
    @musicmagic1991 ปีที่แล้ว +1

    Sir xy-s220h board me kitna amp fuse lagana chahiye pls bataiye

  • @abhinavparihar6324
    @abhinavparihar6324 ปีที่แล้ว +1

    Sir hum without activecross over and passive crossover ke bhi koi bhi components Jo speaker tweeter subwoofer ke liye sahi ho use laga ke hum use Kar sakte hai kya

  • @bandhurampradhan1518
    @bandhurampradhan1518 ปีที่แล้ว +1

    Big amp 4kto8k me konsi company sabse achhi rahegi Batao sir ?

  • @preshitkawli9369
    @preshitkawli9369 ปีที่แล้ว +1

    Sir 8 inch ke speaker ke liye kaunsa class D amp best hai please bataiye

  • @sunnycreative9806
    @sunnycreative9806 ปีที่แล้ว +2

    My self Sunny CREATIVE

  • @editz_2M
    @editz_2M 7 หลายเดือนก่อน

    Sir is me hm kisi bhi om ka speaker laga sakte hai naa

  • @jppj1231
    @jppj1231 ปีที่แล้ว

    Jai ho

  • @glxdolphin1003
    @glxdolphin1003 ปีที่แล้ว

    Sirji class TD amplifier ke bare me ek video Banao na sirji.

  • @manikroy2542
    @manikroy2542 ปีที่แล้ว

    Sir tpa3110d2 12v 5ampr se chalega yaa nhi

  • @sunil_ultra
    @sunil_ultra ปีที่แล้ว +3

    I am already use a 5volt cooling fan and 5amp fuse with ink 1002p amplifier and used a sealed wire for audio input

  • @pallabkumarghosh1989
    @pallabkumarghosh1989 ปีที่แล้ว

    3110 amplifier board main 2inch 5watt 4 ohm ka kitna speaker lagaya ja sakta hain.

  • @Budho8434
    @Budho8434 ปีที่แล้ว +1

    On Sunny CREATIVE youtube channel

  • @Shantanu_2020
    @Shantanu_2020 8 หลายเดือนก่อน

    Fuse kaha lagana hai ?
    Power supply ke AC input me ya DC output me?

  • @gkbhowtomake
    @gkbhowtomake ปีที่แล้ว +1

    I bougth 5630 IC Amplifire board (2.1 --150+150+300) but after a month IC was burn & pcb connecting lines damaged. 5630ic available in indian market plz sir sent me link...
    suggest a hifi pre amp. board with mid

  • @Titan_Nashik
    @Titan_Nashik ปีที่แล้ว +1

    Good evening sir actually mere pass bass trable wala Bluetooth module hai lekin har time vo reset ho jata hai uske settings save kese rakhhe please reply
    Thank you

  • @AlpeshPancholi
    @AlpeshPancholi ปีที่แล้ว +2

    👍👊👏

  • @maxblade01
    @maxblade01 ปีที่แล้ว +1

    Sir mera tpa3110 me sound protection mode me chala gaya h, jab power deta hu to sound kuch micro seconds ke liye aata h fir complete silent ho jata h, mai 19v (4 ohm speaker) use kar raha tha but ic heat hone ke karan fir 12v me switch kar diya and uske baad se ye problem aa raha h. Help

  • @thevenomytgaming9470
    @thevenomytgaming9470 วันที่ผ่านมา

    Sir can we replace cs8673e ic to 3116d2 ic? In class d

  • @pradeepshakya9878
    @pradeepshakya9878 ปีที่แล้ว +1

    Sir self made board ki video banao

  • @VIPINSAINI_20
    @VIPINSAINI_20 ปีที่แล้ว

    3:49 nice

  • @mdguffran3399
    @mdguffran3399 ปีที่แล้ว

    Sir pam8610 amplifier ke do board ko ek sath add karne par humming aa rahi hai but single board me koi humming nhi hai please salutation bataye

  • @ZenSecGaming
    @ZenSecGaming ปีที่แล้ว

    Ink new board's ka review kab lage sir

  • @madhabdebnath6870
    @madhabdebnath6870 ปีที่แล้ว

    Sir amplifier fuse pe 1 dtl video banyan

  • @avengerabhi6620
    @avengerabhi6620 ปีที่แล้ว

    First like sir ji

  • @loserrr1111
    @loserrr1111 ปีที่แล้ว +1

    Sir
    Kab aayega
    The most awaited
    Class AB 700W amplifier board
    By What I Think sir
    😭Ab to intehaan ho gai humare intezaar ki😭

  • @sahadevsahu1872
    @sahadevsahu1872 ปีที่แล้ว +1

    Sir speaker winding bare me ak video banaea.
    Kisibhi company ki speaker winding Karne
    Per pahele jaisa sound nehi atta.please is bare me ak video banaea.

  • @pramodharode6958
    @pramodharode6958 ปีที่แล้ว

    Sir I have been thinking for a long time to buy a good amplifier but I am not able to understand class ab or class d please help

  • @sunnybajwa5311
    @sunnybajwa5311 ปีที่แล้ว

    Sir ,,, sir,,, sir,,,, mei aapki sari videos dekhta bhi hu aur aapko follow bhi karta hu,,,, i m from Punjab,,,,,, but sir , mei yeh kehna chahta hu,, k aapki knowledge, no doubt bohot hi zada hai circuit boards ke mamle me,, par sar agar aap atleast INKOCEAN ko yeh sujhaav de ke class D apmlifiers ko inbuilt power supply ke sath hi banye,, i know price zada hogi hi, par customer ko sidha sidha 220 volt ki ek power deni hogi aur kaam ho jayega

  • @gulshansaini3156
    @gulshansaini3156 ปีที่แล้ว

    Kya ab class amp board se class d outpu le sakta hai

  • @ashishmusic9886
    @ashishmusic9886 ปีที่แล้ว +1

    Sir namaskar nice Information
    Mein jhukegaa nehin 😁😁😁😁🤣🤣🤣🤣

  • @PawanYadav-yn9jx
    @PawanYadav-yn9jx ปีที่แล้ว +1

    🙏

  • @Budho8434
    @Budho8434 ปีที่แล้ว +2

    I am also going to review inkocean amplifier

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว +1

      Best of luck

    • @sunnycreative9806
      @sunnycreative9806 ปีที่แล้ว +1

      In this youtube channel you will get this

    • @sunnycreative9806
      @sunnycreative9806 ปีที่แล้ว +1

      @@WhatIThink sir i am desining a op amp based stereo to virtual 5.1 converter

    • @sunnycreative9806
      @sunnycreative9806 ปีที่แล้ว +1

      @@WhatIThink and i need help can I provide you my gmail so that you can contact

  • @rahimaqaiser6232
    @rahimaqaiser6232 7 หลายเดือนก่อน

    sir class d ic ko replace kese krte hein ap is per vedio bnayen

  • @surajitdas-qx5vb
    @surajitdas-qx5vb ปีที่แล้ว +1

    Mere pas ink 201 bt ka ek board hai, iske sath Inkocean ka 24 volt smps lagayatha aur ek speaker aur ek subwoofer lagayatha. Lekin power dete hi board jal gaya. Iska reason kya hai agar kisike knowledge me hai to please bataiye.🙏

  • @anildhorajiya9806
    @anildhorajiya9806 ปีที่แล้ว

    bhay mera 1 q. he merepas DVD dapic com. Ka he me bluetuth lagana chahata hu lagega kya vol. or amp. nahi he 5.1 ka he disc error ajata he to pls. jara javab jarur se de

  • @AkshayDivkar
    @AkshayDivkar หลายเดือนก่อน

    Hi sir need your help
    I need to build 2.1 sound system for my car using class d amplifier board and Power circuit taking current from car battery also suggest speaker with capacity ani best cost effective speaker

    • @WhatIThink
      @WhatIThink  หลายเดือนก่อน

      Now 12 volt operated class d board with inbuilt booster are available in market...see my new videos

  • @Ankit.Uk08
    @Ankit.Uk08 ปีที่แล้ว

    Sir class d amp me alag se capacitor kese lagaye jab hum smps se supply de rahe hai matlab bich me capacitor kese jote single supply pr plz batao

  • @Budho8434
    @Budho8434 ปีที่แล้ว +1

    1st sir

  • @DjAnilMeenaalwar
    @DjAnilMeenaalwar ปีที่แล้ว

    Sir ek supply 12 volt dc to 50 0 50 volt dc ke amp kaise badhaye kya modify kare

    • @DjAnilMeenaalwar
      @DjAnilMeenaalwar ปีที่แล้ว

      Mujhe 10 ampere supply se 500 watt class d board chalana hai
      Uske ampere kaise increase karu

  • @yashchavan5990
    @yashchavan5990 ปีที่แล้ว

    😍😍😍😍😍

  • @balareddaveni2751
    @balareddaveni2751 ปีที่แล้ว

    I buy ink-201bt run14v 50w 6" speker
    Sub8"100w only 2 month work suddenly sub ic burnt ic change 1day after burn I buy anather one 1month after 50w8ohm 6 inch L.R sub8" 8ohm fuse prtection now LR ic fail i think same tecnical mistake infam to ink ocen allredy igive feed back but sound very good

  • @Funny.Edits.26
    @Funny.Edits.26 7 หลายเดือนก่อน

    Iot201bt ki to datasheet hai hi nahi Google pe ... Mane duda mili hi nahi

  • @sunil_ultra
    @sunil_ultra ปีที่แล้ว +3

    I have a question sir
    Is the class D amplifier cause radiation without filter which is harmful for health

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว +1

      No such thing is reported till date.

  • @subhashrajwar9125
    @subhashrajwar9125 ปีที่แล้ว

    Part 2 Nahi laye Sir??

  • @vijaygaur3567
    @vijaygaur3567 ปีที่แล้ว +1

    On your recommendation,today I purchased a amplifier from inkocean model Ink201, it's a 2.1channel amplifier 50+50 and 100 Watt,
    Sir can I use 2 column of 100watt each of 6 ohm . these r Panasonic columns of 6 ohms with 1speaker and 1woofer in each column.
    Kindly reply so that I will start using it

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      Yes you can Sir... But why you have purchased 2.1 amp? You should have bought 2.0 amp of 100+100 watt.

  • @veeramaniveera4264
    @veeramaniveera4264 ปีที่แล้ว

    I am buying last year ink201 , burning.........after 4month same board buying, same complaint........

  • @12villages
    @12villages ปีที่แล้ว +1

    Class d chip toh jalta hai hi haha because it is smd package with very close pin distance having high current flow. Even a small change in moisture or dust build up causes direct short circuit and it burns usually with a small cracker sound. No solution unfortunately. They made this as "use and throw" boards.

  • @nirmalbiswas8743
    @nirmalbiswas8743 ปีที่แล้ว +2

    Sir I use sound king sk10 3way speaker with Inkocean tpa3255 220+220+350 watt amplifier, but watching your video I am getting afraid to play the amplifier because the soundking 3way Speaker box has a complicated network crossover, so now what can I do to protect my class D amplifier? I also use Inkocean recommend combo smps power supply. Please reply 🙏, I am fan with this Amplifier and Speaker box because its next level Sound quality. So please inform me what safety can I take? And please guide how can I install the fuse in this Amplifier board? I only believe your guide not other youtuber 🙏

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว +1

      If amp is not getting heated without any input then you can use it without any problem.

    • @nirmalbiswas8743
      @nirmalbiswas8743 ปีที่แล้ว

      @@WhatIThink thank you so much, and I am only trust you Dada because of your detail knowledge about Electonic 🙏

  • @surajitdas-qx5vb
    @surajitdas-qx5vb ปีที่แล้ว +1

    Bhaiya mere paas Inkocean ka smps(24 v 8amp) hai. Mujhe kuchh doubt sa lag raha hai. Iske output ka negative aur positive dono me hi tester jal raha hai. Ye kharab hai kya?
    Aur ek sawal. subwoofer shot ho sakta hai kya, aur shot hone se konsa nuksan hota hai?
    Me ek naya board liya tha. ink 201 bt. sirf ek speaker lagaya to chal gaya lekin jab subwoofer connect kya to sath sath board jal gaya. mere dimag me kuchh nahi aa raha hai.

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      Nahi... Lekin iske saath 3 wire ka earth wala connection use karen.

  • @praveenkumar4657
    @praveenkumar4657 ปีที่แล้ว

    Hi good morning

  • @souravgope3196
    @souravgope3196 ปีที่แล้ว +1

    Namaste sir, I've tried not attaching both grounds to the amp by following your video of diy Bluetooth speaker making. But the buzzing is still there, how do i completely remove it. I'm making a 12v bt spk next and want to make it's sound good quality, your response would be very beneficial

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      All supply and grounds should be attached at one point of battery.

  • @rajdeeppathak6100
    @rajdeeppathak6100 ปีที่แล้ว

    Sr 3116d2 k subwoofer inductor bina load lagaay b heat hote rehte h y sabhi 3116 k board m hota h ya mere usme hi h
    Sr iska koi solution bataaiye

    • @rajdeeppathak6100
      @rajdeeppathak6100 ปีที่แล้ว

      Sr reply de dijiye jaise aapke vichar hon...

  • @bishalnepali8154
    @bishalnepali8154 ปีที่แล้ว

    Sir 30 amp ko 2 amp me convert kar sakte he diod se?

  • @ashokasawant9325
    @ashokasawant9325 ปีที่แล้ว

    Class D Amplifier 100+100 ke sath Class D 100 watts bass bord lagaya gaya tha jisme 24 v 10 amp supply diya gaya amplifier to sahi hai lekin bass bord ki IC jal gaya hai.

  • @DHARMENDRA12
    @DHARMENDRA12 ปีที่แล้ว

    Dusre mein itna jaldi nahin lagta galat kah rahe Jo chhoti wali aisi hai bahut jaldi jal

  • @yashchavan5990
    @yashchavan5990 ปีที่แล้ว

    Sir ek question he

  • @Djsnakot1
    @Djsnakot1 ปีที่แล้ว +1

    Sir phase cancellation me speaker ke sath hf kaise lagaye

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      depends upon the crossover order. 3rd order me tweeter reverse me lagta hai.

    • @Djsnakot1
      @Djsnakot1 ปีที่แล้ว

      Sir pasive cross over lagaya hai

  • @akhileshyadav5132
    @akhileshyadav5132 ปีที่แล้ว +1

    आपकी बातों ने कई परेशानी का हल कर दिया है, लेकिन आपने ohms लोड पर ध्यान दिया है तो एक #प्रश्न है कि, स्पीकर के साथ वायर का भी तो कुछ रजिस्टेंस हैं और वो 4 से 5 ohm तक पहुंच जाता है तब भी जलने की परेशानी तो नहीं होगा?
    ऐसे ही 5ohm, मैं AB class के साथ उपयोग कर रहा हूं लेकिन ऐसा नहीं हुआ

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว +2

      Ohms jyada hone se problem nahi hoti bus hume power kam milti hai.

  • @vijaychoursiya2535
    @vijaychoursiya2535 ปีที่แล้ว

    सर मेने 1 महीने पहले in 201 बोर्ड खरीदा था और वह बोर्ड का l L&R चेनल बंद हों गया है मुझे उसकी IC नहीं मिल रही है क्या आप मुझे ic प्रोवाइड करवा सकते है मेने ink ocen पर भी कॉल किया था लेकिन उनका नंबर पार्मनेंट बिजी आ रहा हे IC का नंबर हे CS 8673E हे कृपया मदद करे

  • @MUKUL760
    @MUKUL760 ปีที่แล้ว

    TDA 2050 BEST.

  • @santuaxom6206
    @santuaxom6206 ปีที่แล้ว +1

    Han dusri board mein bhi jol jata hai

  • @DHARMENDRA12
    @DHARMENDRA12 ปีที่แล้ว

    10 15 din mein Mera bhi jal Gaya

  • @avengerabhi6620
    @avengerabhi6620 ปีที่แล้ว +1

    Sir ye bord me pre amp ala ala kyu hai
    Our hme aaisha pre amp bord kha milega

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      inkocean par hai

    • @avengerabhi6620
      @avengerabhi6620 ปีที่แล้ว

      Sir mera matlab pre amplifier me bass frequency ho waisha opamp chahiye

  • @VINTEX7890
    @VINTEX7890 ปีที่แล้ว

    Inkoeceon ke 2.1 audio board bekar hai mera ic jalgyea

  • @yashchavan5990
    @yashchavan5990 ปีที่แล้ว

    Me jab hometheter ko on krta hu toh sarting me ek jor se aavaj aati he our band krta hu to bhi vesehi hota he but chatla ekdam badhiya he koi solution he ?

    • @WhatIThink
      @WhatIThink  ปีที่แล้ว

      use speaker protection circuit

    • @AnuPam_2006
      @AnuPam_2006 ปีที่แล้ว

      @@WhatIThink Mera bhi same problem hai, mera Tda 7265 single ic ka board hai, 25 watt stereo ke liye speaker protection chahiye kya, ya aur kuch problem hai ?

    • @yashchavan5990
      @yashchavan5990 ปีที่แล้ว

      @@WhatIThink to toh mehenga milega 😅

    • @yashchavan5990
      @yashchavan5990 ปีที่แล้ว

      @@WhatIThink ghar me konsabhi sweetch onn off krte he to vesahi sound aata he

    • @pran.patil007
      @pran.patil007 6 หลายเดือนก่อน

      Hello bhai ye board kaise chal raha hai . Mera home theatre hai joko uska board kharb ho Gaya hai to ye amplifier lesakta hua kya kise chal Raha hai apka board

  • @dixitsakharkar
    @dixitsakharkar ปีที่แล้ว

    मैने पिछले हफ्ते बोर्ड मगाया था। थोड़ी देर बजा फिर जल गया । आइसा कैसे हो गया होगा।

  • @VIPINSAINI_20
    @VIPINSAINI_20 ปีที่แล้ว +2

    14:08
    Well that's the problem
    Don't get Class-D

    • @deepaknanda1113
      @deepaknanda1113 ปีที่แล้ว +1

      Everything have pro and congs... don't get scared of class-D.

    • @VIPINSAINI_20
      @VIPINSAINI_20 ปีที่แล้ว

      @@deepaknanda1113 Just like that no-one asked for your help

    • @deepaknanda1113
      @deepaknanda1113 ปีที่แล้ว

      @@VIPINSAINI_20 then why u crying...here.
      U calling something bad doesn't make it bad bacause of ur own poor understanding...btw im not helping u...its called something else

    • @VIPINSAINI_20
      @VIPINSAINI_20 ปีที่แล้ว

      @@deepaknanda1113 Who the crybaby here 🤣🤣🤣

    • @deepaknanda1113
      @deepaknanda1113 ปีที่แล้ว

      @@VIPINSAINI_20 anyone can see...who is crying about CLASS D Amp...

  • @gaurav2226
    @gaurav2226 ปีที่แล้ว

    Teen bord jal gaya aur teen ic order kiya to do hi bhej diya paisa teen ic ka liya badme ek ic bheja bhi nahi bekaar hai sab

  • @arupmazumder7174
    @arupmazumder7174 ปีที่แล้ว

    Class D is worthless

  • @virendra9112
    @virendra9112 ปีที่แล้ว

    1 St view sir

  • @virendra9112
    @virendra9112 ปีที่แล้ว +2

    Sir please tell be the best 5.1 audio decoder in price range 10000-15000

  • @sschouhan6492
    @sschouhan6492 ปีที่แล้ว

    Sir is ic me kitne ohm ke speaker chalte he please reply