Help defeat the TH-cam algorithm: www.patreon.com/wordsnwood ----- ----- ----- These are made in much the same way you would make end-grain cutting boards. However, one key difference is that you arrange the pieces in a purposely random arrangement, and not in a nice even regular layout. (and yes, "purposely random" is a bit of an oxymoron, isn't it?) The key thing to remember is to make sure you use some contrasting woods to make sure that you end up with something that looks interesting instead of bland. It’s all about colour and contrast. Details on the project web page! 📃Build Article: www.wordsnwood.com/2017/coasters/ YOUR SUPPORT IS APPRECIATED: 💵 Become a Patron: www.patreon.com/wordsnwood 🛒 Buy a Plan: wordsnwood.com/plans/ 👕 Buy Merch: wordsnwood.com/merch.html
So, here's my input on finish. I was always using poly on my coasters. One day I made a set for my house. I just tossed them in my mineral oil tank over night. Now, 2 years later of use at my house and they are still perfect. A few months ago I stopped using the poly. All of my coasters now go out just with mineral oil. Everyone loves them!
@@Wordsnwood poly is obviously going to do more over time but it's a coaster. The less time spent making it is more profit. The oil will definitely last a long time and you can just take a pile of them and toss them in the tank.
you discarded the most interesting two !! knots are not a fail they're the one to sit the bottle on. the exception that broke the rule. a talking point :) keep them in lol
Any sizeable city will likely have a place that sells hardwood lumber. Stores like Rockler or Woodcraft in the US also have this, but it's pretty expensive. There are also places online that mail-order lumber. ps: thanks for your kind words.
I probably use something like titebond II, but I doubt you have anything to worry about with any wood glue. You are not soaking these in water, they should have a good solid polyurethane coating.
Great job on those coasters. I like to run all four sides through a router so I get a nice round corner for my coasters. Thanks for taking us along during your coaster construction... Brad
I'm just here to stick up for the dull coasters. Oh sure, they may not have that across the room sex appeal like some other coasters, but if you take the time to get to know them you learn to appreciate all their subtle details.
Question - before slicing up the coasters, could you put the block on a lathe and round it? Or because of the grain direction would that not work? I don't own a lathe, but the small ones pop up all the time on CL and I might consider getting one if the price is right and I could do something neat like coasters. Regardless, this is a great way to use up spare cutoffs, thanks for the idea.
Sorry, I'm not a turner. You'll have to ask someone else. I would think so, as I've seen all kinds of people on youtube turn glued-up objects. But there will definitely be lots of grain direction changes.
I always enjoy spending time in your shop. :) Looks great, Art! I can't recall if you have a lathe or not, but it would be neat to see how that leftover block would look once it's been turned.
If you're in the US, then Woodcraft or Rockler will carry exotic project wood. Expensive though. It's far cheaper to find a hardwood lumber dealer. Most cities of reasonable size will have a hardwood lumber store of some kind. Smaller towns have them also, but small lumberyards are more likely just carrying domestic stuff. Actually I think some places even sell online, but as I live in Canada those US places aren't really an option for me.
I actually order my exotic lumber from ebay. I buy 10 or 20 board feet at a time, and the price is much better than what you would pay at a specialty wood shop.
Can you put cedar in with hardwood to make end grain coasters. I really like the coasters you made however I have a bunch of cedar scraps that I would like to use up.
Love the knots in the so called bad ones. Honestly the last ones are far too busy as well. I would go more simple. I actually have and old cutting board that I'm going to try to upcycle into coaters. 😬
Do you know any common softwood that is NOT basically plain white? :-). Seriously, I think there is a smidgen of spruce in there... Maybe. I don't think it is an issue of "best", just an issue of getting nice colours and contrast.
Cutting boards get submerged in water regularly, and have not much finish. These are covered in Polyurethane and do not get submerged in the sink. I've had my set in use for over a year with no change. This was all well seasoned and acclimatized wood in my shop.
Great job. I would wrap that big chunk of wood with a nice walnut boarder on the four sides... I think it would finish it off nice. Certainly no disrespect to what you have done there. Very nice.....
Great idea and i like the contrast between the light and dark sides as well. If you were to sell something like this at say a Christmas Market/Fate/Fair, how much would they sell for approx, box included with and without? Barry (ENG)
Barry Roberts I have never sold stuff at fairs, so I have no idea what the going rate is. I doubt I would get a fair wage out of it as I would be surprised if you'd get more than CA$25... You really need to "assembly line" things then and I have never worked like that.
Help defeat the TH-cam algorithm: www.patreon.com/wordsnwood
----- ----- -----
These are made in much the same way you would make end-grain cutting boards. However, one key difference is that you arrange the pieces in a purposely random arrangement, and not in a nice even regular layout. (and yes, "purposely random" is a bit of an oxymoron, isn't it?)
The key thing to remember is to make sure you use some contrasting woods to make sure that you end up with something that looks interesting instead of bland.
It’s all about colour and contrast. Details on the project web page!
📃Build Article: www.wordsnwood.com/2017/coasters/
YOUR SUPPORT IS APPRECIATED:
💵 Become a Patron: www.patreon.com/wordsnwood
🛒 Buy a Plan: wordsnwood.com/plans/
👕 Buy Merch: wordsnwood.com/merch.html
So, here's my input on finish. I was always using poly on my coasters. One day I made a set for my house. I just tossed them in my mineral oil tank over night. Now, 2 years later of use at my house and they are still perfect. A few months ago I stopped using the poly. All of my coasters now go out just with mineral oil. Everyone loves them!
Fascinating. Never tried that.
@@Wordsnwood poly is obviously going to do more over time but it's a coaster. The less time spent making it is more profit. The oil will definitely last a long time and you can just take a pile of them and toss them in the tank.
Art, that's just beautiful! Thanks for sharing. FWIW... Mineral Oil, Poly Coat, or Bee's Wax, they're all beautiful! Artful indeed!
I like the knotted ones.. Adds character
Great video! I'm making my family coasters for Christmas and I'm so happy I found your video. These coasters are strikingly beautiful and special!!
Great video! Thanks for posting.
Best looking coasters I've ever saw.
This is just what I want to make. Thanks for taking the time to share.
Great easy to follow video. Well done. Will be making some as fill in side projects
you discarded the most interesting two !! knots are not a fail they're the one to sit the bottle on. the exception that broke the rule. a talking point :) keep them in lol
Thanks. Appreciate your work.
Very nice. Well Done. Thanks for sharing.
Hanks. I have plans for coaster sets as Christmas gifts. At least seven sets.
I wish I could find these different woods. It’s absolutely beautiful!
Any sizeable city will likely have a place that sells hardwood lumber. Stores like Rockler or Woodcraft in the US also have this, but it's pretty expensive. There are also places online that mail-order lumber.
ps: thanks for your kind words.
Beautiful!
Great video....thx for posting.
I would like to see matching dinner plate mats in this design :) great video and nice why to use off cuts.
Those are fantastic!!
Thanks Art, they look great!
Easy way to rid of some scraps. Nice video
I gotta say, those are some beautiful coasters imo.
Well worth the effort Art! Turned out great and cool design.
Any preference on the wood glue to use(or anything to stay away from)..
Thanks. Great video
I probably use something like titebond II, but I doubt you have anything to worry about with any wood glue. You are not soaking these in water, they should have a good solid polyurethane coating.
Great use of the bits... I hate throwing out any wood that's got potential.
Rejects = shop coasters! Nice work Art!
Is Shelack Good To Use?
I wouldn't. Shellac is water resistant, but not waterproof
Great job on those coasters. I like to run all four sides through a router so I get a nice round corner for my coasters. Thanks for taking us along during your coaster construction...
Brad
good idea.
Belíssimo trabalho amigo parabéns ganhou mais um inscrito e deixo aquele like valeu ✍️ 👍 🤝 💯
Great video! What a wonderful idea for gifts
I'm just here to stick up for the dull coasters. Oh sure, they may not have that across the room sex appeal like some other coasters, but if you take the time to get to know them you learn to appreciate all their subtle details.
I know, I'm sure they have a nice personality...
Personality will only get you so far in this world.. ;)
and unlike humans, the looks of these coasters will only get better with time.. :)
Slice me off some of that wood loaf :)
They look great!
They look great. A really good use for small offcuts particularly coming up to christmas. I think I'll make a few sets!
How do they perform? Do they absorb any water (or whatever liquid from drinks)? Or does the water bead up and run off the edge onto the table?
Keith Carlson the finish protects them.
Question - before slicing up the coasters, could you put the block on a lathe and round it? Or because of the grain direction would that not work? I don't own a lathe, but the small ones pop up all the time on CL and I might consider getting one if the price is right and I could do something neat like coasters. Regardless, this is a great way to use up spare cutoffs, thanks for the idea.
Sorry, I'm not a turner. You'll have to ask someone else. I would think so, as I've seen all kinds of people on youtube turn glued-up objects. But there will definitely be lots of grain direction changes.
@@Wordsnwood Thank you for the reply. Happy woodworking!
I always enjoy spending time in your shop. :) Looks great, Art! I can't recall if you have a lathe or not, but it would be neat to see how that leftover block would look once it's been turned.
Great looking coasters
Felicitaciones, desde Chile
Nice idea and they turned out great!
Nice...so where are you finding all these different species of wood? Definitely not a big box store!
If you're in the US, then Woodcraft or Rockler will carry exotic project wood. Expensive though. It's far cheaper to find a hardwood lumber dealer. Most cities of reasonable size will have a hardwood lumber store of some kind. Smaller towns have them also, but small lumberyards are more likely just carrying domestic stuff. Actually I think some places even sell online, but as I live in Canada those US places aren't really an option for me.
I actually order my exotic lumber from ebay. I buy 10 or 20 board feet at a time, and the price is much better than what you would pay at a specialty wood shop.
that's what i do too wood paneling in different design pattern & color
Отлично получилось! Подписался. Вопрос - где и кому их продавать? Через какую торговую площадку? Спасибо.
Sorry, I don't sell them online. ----
Сожалею. Я не продаю их онлайн
Can you put cedar in with hardwood to make end grain coasters. I really like the coasters you made however I have a bunch of cedar scraps that I would like to use up.
I've never tried it. Sorry, can't answer your question.
Those look great. Great for gifts!
Love the knots in the so called bad ones. Honestly the last ones are far too busy as well. I would go more simple. I actually have and old cutting board that I'm going to try to upcycle into coaters. 😬
The world would be boring if we all liked the same stuff! Glad you got some ideas to use.
Just want to clarify its best to use hardwood only?
Do you know any common softwood that is NOT basically plain white? :-). Seriously, I think there is a smidgen of spruce in there... Maybe. I don't think it is an issue of "best", just an issue of getting nice colours and contrast.
@@Wordsnwood So no. A mix of soft and hard woods are ok.
Curious... how did they work out over time? End grain chopping boards made thin cup badly..
Cutting boards get submerged in water regularly, and have not much finish. These are covered in Polyurethane and do not get submerged in the sink. I've had my set in use for over a year with no change. This was all well seasoned and acclimatized wood in my shop.
On the original, try a maple ot cherry stain? Bet it makes the diffetent woods pop a lot more.
Can’t you use a clear epoxy like on restaurant tables?
you can if you want. Poly is cheap and works. Epoxy is going to give a thicker topcoat as well.
Great job. I would wrap that big chunk of wood with a nice walnut boarder on the four sides... I think it would finish it off nice. Certainly no disrespect to what you have done there. Very nice.....
Great idea and i like the contrast between the light and dark sides as well. If you were to sell something like this at say a Christmas Market/Fate/Fair, how much would they sell for approx, box included with and without?
Barry (ENG)
Barry Roberts I have never sold stuff at fairs, so I have no idea what the going rate is. I doubt I would get a fair wage out of it as I would be surprised if you'd get more than CA$25... You really need to "assembly line" things then and I have never worked like that.
@@Wordsnwood People expect really nice handmade products at cheap prices at fairs. Best prices are at art shows. Like selling hand made boxes.
I like it.
beatiful...
Great videos, I have been watching some of your videos, are you related to the guy on woodworking for mere mortals? :)
I'm the better looking one...
Que pegamento usas???
Titebond Type 2 glue - so inreased water resistance
7/16"?
sure, that'll work. make 'em as you like em! :-)
Turn that leftover block into something
Very Frank Lloyd Wright. Well done!
Thanks. I think it's a bit Piet Mondrian also.
I did a wall with something similar, there is no such thing as scrap wood.
Nail and gear flag!
Hello, Tim! I made a video about that...