If you like RESTORATIONS, you have to check this out: 3 Phase Helical Gear Motor Restoration - th-cam.com/video/sbm-vp_DqDk/w-d-xo.html Don't forget to Subscribe :)
It good to know there are others still out there like me and you . I'm afraid in a generation or two there will be know one left that can take the image from deep inside and apply it to a physical state . Dont stop , I know I never will . Good luck. The sky is the limit
Что бы там не писали диванные комментаторы, я (в первую очередь) поражен подачей материала ролика! Хоть сразу было понятно, что будет в конце, но смотрел, как зачарованный, без единой перемотки, даже в один момент была мысль проверить скорость воспроизведения, но по музыкальному сопровождению понял, что всё нормально. А главное, всё без лишних слов, домашних зверюшек, детишек и с минимумом рекламы. Вобщем мне очень понравилось, респект и уважуха 👍👍👍
Δεν είναι μόνο ότι είσαι μάστορας έχεις καλά σύγχρονα και ακριβείας μηχανήματα που σε βοηθούν πάρα πολύ στις κατασκευές που κάνεις. Όπως και νάχει αξίζεις πολλά Μπράβο!!!
Super! Robisz 1000 razy więcej dla promocji Polski niż wszystkie rządowe programy i agencje. Życzę Ci milionów subskrybentów z całego świata. Wspaniale pokazujesz jak wielofunkcyjnym narzędziem jest tokarka. Dziś niewiele osób wie, że można na niej wykonać wszystkie procesy skrawania, a nie tylko toczenie. Strasznie spodobała mi się ta "ręczna wiertarka stołowa" :-) he he... Stopka do wiercenia prostopadłego jest super!
@@tarjeidavidsen7611 Sounds like the "Green-eyed monster" has a hold on you and after seeing you only have four videos and one subscriber to your channel I can comprehend your childish response to this man's accomplishments. Grow up and get to work soyboy.
This is the whole reason why I chose to stop watching network tv and I plugged in my computer to the tv for TH-cam it has been two years now and I enjoy this way more !
Same rule applies to this as well as the hydraulic vise.... count you fingers before you start and make sure you have the same by the time you are finished
I bow my head. Not only for a perfectly done job, film, but also for an excellent advertisement for Poland. Ps. almost 10% of negative comments are probably out of anger that someone is doing something better. Jealousy can be the icing on the cake;)
It's nice and very humbling to watch a human that is actually important to that human race. You are the type of person people should look up to and find important.
И вообще,станочная база весьма не гаражная,и пила ленточная,и станок сверлильный на магнитной присоске,и вообще много всего прочего, интересного и малодостуного
Polish ppl know things very good, for example loss of power in diesel engine means blocked fuel pipes or bad air/fuel mixture or no fuel in the tank. There are probably more possible issues but I'm to young to know. I heard that kids can already assemble a basic tractor and other machinery.
In Poland and rest of slavic past-communist countries you have huge pressure for mathematic, physics more than for humanistic subjects. 20 years ago everone was had a technical drawing as subject in schools, connect it with lack of sources at commie times and you have wizards who can create everything from scratch :) Now it change and kids are from primary school are start learning IT subjects but math still play the main role as most important subject in schools.
Maszyna pierwsza klasa do domowych zastosowań. Z doświadczenia polecałbym zmienić włącznik na taki co ma lewe/prawe obroty, nie ma z tym dużo zachodu a pomaga w sytuacjach gdy drewno się zaklinuje.
Добрый день всем земляне! Однозначно подписываюсь и лайкаю бесконечно! Благодарю мастер, очень нужная самоделка! Как жаль, что невозможно такое заказать! Я женщина одинокая и в хозяйстве дробилка мусора и веток с участка очень нужна!
Egyptians built the pyramids thousands of years ago. What does Poland has to show for being bright and ingenious. Have you ever heard of Poland syndrome?
Alazar Tekie What Poland syndome has to do with Polish people? You just know the name of this syndome and that’s all. „What does Poland has to show for being bright and ingenious” Some examples: bulletproof vest, windshield wipers, blue laser - this is why you can strone so many files on your CD and watch full HD movies. Rovers (space exploration), color photos and mine detector also called as a Polish mine detector and this time not only becouse of the surname of British scientist (Poland Syndrome, Alfred Poland)
@@lolkekkeklol9353 well if it is like this we indians are the smartest, but idk if u know that india was earlier under british rule , actually plane was invented by an indian but the book was taken by the british, there is prrof cause some leftover of plane were. Recntly excavated in india which are older than the time right brothers invented plane. India invented zero without zero maths would have been impossible. So dont say abkut any country . Just say that humans are smart not sone people who belong to a country. India also invented shampoo, platic surgery 1000 years ago , if u want proof search it, our relegious books which were written 1000 years ago had information about atoms molecules, now what. Not only indians , egyptian or people from poland are smart , humans are smart
Ya know, this guy has some amazing tools and at first I was jealous. Then I realized he made half of them himself and now I'm in awe at his skill. One day, I hope to make my own shop as amazing
I've watched this twice now! I enjoyed it both times. Keep up the good work and the exciting videos for those of us who are too fond of our armchairs to get our hands dirty. Greetings from Hampshire UK, Nick
I’ve come to expect very solid design and very good execution from you. The design on this one is particularly well done. Very robust. I like how you show off in subtle ways. Like slotting between holes with the plasma cutter. Perfectly tangent, no grinding needed. Nice work
Ta sieczkarnia to nawet nie leżała przy profesjonalnym lol 🤣 brak wyłącznika bezpieczeństwa, siekiera 🪓 przyspawana do blatu po złożeniu wystaje poza zarys urządzenia LOL i w dodatku ostrzem do góry !?! To urządzenie jest wszystko inne niż profesjonalne.
You did an absolutely fantastic job, the only error I believe made here was that the axe head is not removable and is welded to the plate. That is a piece that will go bad and will need to be replaced easily. Again Overall Fantastic Job.
Not really.. Its not relying on sharpness to do the splitting. And fasteners will tend to come loose. It can be ground off in minutes in the rare case it needs to be replaced. I'm much more concerned about the lack of safety features. That corkscrew is just waiting for a loose sleeve and I dont see an emergency stop. The chopper should also have a bar to save anyone getting pulled in. Both of these situations WILL happen eventually, with enough machines and hours, only a matter of time. I know there is an argument for survival of the fittest/that office worker types and those lacking common sense should just stay away from dangerous machines, but anyone can get distracted, have a bad day, be in a rush. It is worth protecting your customers.
If ever they ban you from the workshop, You could go into the movie making business man, because you are excellent at both. Hats off to you in all directions. You are a compliment to mankind.
The thought process shown here for your creativity is amazing! This machine is a monster, it’ll last a lifetime. It never gets old watching you work… Thanks for sharing, this is awesome!
Oh thank god it has a feeder to keep hands far away i cant say how many times ive seen chippers that are just open for that alone you get my like good sir
@@sakhabur зачем подбирать? Знаешь же, какой болт у тебя пойдёт в эту дырку, такое сверло и бери. Вообще, дядька в ролике от недостатка инструмента не страдает явно.
No matter how amazing your work is, there always seems to be someone to give you advise on how to make it better. Idiots. Brilliant job, sir! Simply brilliant!
Omg...I couldn’t believe what I was watching ...but wow what a privilege a real life magneto a true master of metals bro your a genius as well. salute and great work everything seemed perfect👍🏽👍🏽👍🏽👍🏽👏🏽👏🏽👏🏽
Nothing wrong with trial and error. Only way to learn imo. The moat impreasive thing is this guy had the whole project mapped out in his head. The satisfaction of bringing vision to reality cant be beaten
would you say the motor could have used a strap so that it didnt like put a bunch of pressure on that bracket he made? or am I just missing where theres a relief of weight on it? just wondering, no criticism or anything towards this dude
@@alecalbain1065 I would say it doesn't need one. The motor seems more than adequately supported. The mounting bracket was built to utilize the existing threaded mounts molded with the motor housing. I feel any failure of mounting is likely to come from the motor itself. Meaning an engineering flaw within their own motor housing/anchoring design. In my opinion, the bracket its bolted to is plenty strong to support that motor on it's own.
Great piece of engineering, really liked the wood splitting. I've been using bottle jack with wide wedge in frame. Think I'll copy this machine will make extra use of branches as chips in my fire logs. Great video.
Watching the construction of a wood chipper and log splitter is both fascinating and educational. It's impressive to see the process of building such powerful machinery.
If you like RESTORATIONS, you have to check this out:
3 Phase Helical Gear Motor Restoration - th-cam.com/video/sbm-vp_DqDk/w-d-xo.html
Don't forget to Subscribe :)
Made in Poland нужно делать ,красную кнопку СТОП , ударил и остановилась работа !
This thing make me scare
Otherwise which plasma cutter do you use?
It good to know there are others still out there like me and you . I'm afraid in a generation or two there will be know one left that can take the image from deep inside and apply it to a physical state .
Dont stop , I know I never will .
Good luck. The sky is the limit
@@daniele3275 pp0
This is great but enough with the fucking comercials
Офигеть, вот так надо снимать видео. Без никаких долгий разговоров (подсказки), все понятно и чётко раз раз раз. Отличный обзор👍👍
Что бы там не писали диванные комментаторы, я (в первую очередь) поражен подачей материала ролика! Хоть сразу было понятно, что будет в конце, но смотрел, как зачарованный, без единой перемотки, даже в один момент была мысль проверить скорость воспроизведения, но по музыкальному сопровождению понял, что всё нормально. А главное, всё без лишних слов, домашних зверюшек, детишек и с минимумом рекламы. Вобщем мне очень понравилось, респект и уважуха 👍👍👍
Сразу видно,что руки у пана растут из правильного места!Оснащение же мастерской вызывает восхищение.Браво!!!!
Δεν είναι μόνο ότι είσαι μάστορας έχεις καλά σύγχρονα και ακριβείας μηχανήματα που σε βοηθούν πάρα πολύ
στις κατασκευές που κάνεις. Όπως και νάχει αξίζεις πολλά Μπράβο!!!
A Very Skilled, Knowledgeable, Ingenious, and Experienced Fabricator.
A Pleasure to Watch .
Super! Robisz 1000 razy więcej dla promocji Polski niż wszystkie rządowe programy i agencje. Życzę Ci milionów subskrybentów z całego świata.
Wspaniale pokazujesz jak wielofunkcyjnym narzędziem jest tokarka. Dziś niewiele osób wie, że można na niej wykonać wszystkie procesy skrawania, a nie tylko toczenie.
Strasznie spodobała mi się ta "ręczna wiertarka stołowa" :-) he he... Stopka do wiercenia prostopadłego jest super!
Home Hero Virul super! Swilsti chkzexig jcielnvojde super!
Dołączę do tego samego życzenia. Milion!! Pozdrówka!
CD seen
Podoba mi się że budujesz te maszyny z zapasem - to i za 100 lat będzie działać. Estetycznie też do mnie przemawia.
Wow!!! Very impressive!! Someone obviously got an A+ in metal shop.
You totally rock 🎸
You Sir are a true Craftsman and I love watching your creativity and builds, keep up the great work!
I mean... If you got a saw that cuts metal and a hot metal glue gun you too can be a top tier homebrew fabricobbler
@@tarjeidavidsen7611 Sounds like the "Green-eyed monster" has a hold on you and after seeing you only have four videos and one subscriber to your channel I can comprehend your childish response to this man's accomplishments. Grow up and get to work soyboy.
This is the whole reason why I chose to stop watching network tv and I plugged in my computer to the tv for TH-cam it has been two years now and I enjoy this way more !
Damn right!
I'm with ya on that. And you learn more, plus it's cheaper!
Same rule applies to this as well as the hydraulic vise.... count you fingers before you start and make sure you have the same by the time you are finished
Man thank God I have not seen a hydraulic vise in a good long time I can't say I'm looking for one either.👍
Good idea
Lol
Rule of “thumb” if you will.
Молодец, хотя и поляк, у вас тоже есть оказывается свои мастера, уважаю!
This guy is incredibly smart, innovative, skilled, and a joy to watch as he creates useful tools.
Because he is polish
@@kamilazolotar4693 well...have yuh seen Russia?
And probably have huge amount of money in him
@@raffysungarngar3684 I was going to say, the stuff he use in his builds are not cheap!
@@rorschacht8478 yup he surely does😂😂😂😂
Watched from start to finish!!!!!! Worth the 20mins. Very inspiring. I think I'm ready to move up from hang curtains.
Sometimes we are fortunate to see a genius design, create, and video tape his creation. Thank you.
I bow my head. Not only for a perfectly done job, film, but also for an excellent advertisement for Poland. Ps. almost 10% of negative comments are probably out of anger that someone is doing something better. Jealousy can be the icing on the cake;)
It's nice and very humbling to watch a human that is actually important to that human race. You are the type of person people should look up to and find important.
T'ai fr oui ou non
Subskrybuję od niedawna i stwierdzam,że to najlepszy polski kanał DIY.Zawsze na poziomie i bezpiecznie wykonane urządzenia.Podziwiam i pozdrawiam
When it comes to making stuff from a pile of steel you're the man. Glad to see the wood monster done. Looks good
This chipper/ splitter will last forever! Awesome! Great skills! 🤗really well done. Thx for sharing
Браво, я реально залип, приятное видео, и Кайфовое Оборудование, и золотые руки, Браво.
Автор молодец.
И хорошо,когда в мастерской ( случайно) завалялось запчасти для станка.
И ещё случайно такой инструмент в углу воляется 😁
И вообще,станочная база весьма не гаражная,и пила ленточная,и станок сверлильный на магнитной присоске,и вообще много всего прочего, интересного и малодостуного
I've got a lot of Polish friends over here in Canada and you guys always have such great mechanical ingenuity, it's in your blood, keep it up!
ผมทน
It comes with trying. If I can't do something then I at least try and learn how it's built and how it's working
Polish ppl know things very good, for example loss of power in diesel engine means blocked fuel pipes or bad air/fuel mixture or no fuel in the tank. There are probably more possible issues but I'm to young to know. I heard that kids can already assemble a basic tractor and other machinery.
In Poland and rest of slavic past-communist countries you have huge pressure for mathematic, physics more than for humanistic subjects. 20 years ago everone was had a technical drawing as subject in schools, connect it with lack of sources at commie times and you have wizards who can create everything from scratch :) Now it change and kids are from primary school are start learning IT subjects but math still play the main role as most important subject in schools.
Thank you for adding a chain cover! My brain is an a-hole and immediately imagined a hand gettimg caught.
It's so graceful and elegant. I was expecting a fire breathing eating, crunching, destruction of a machine. Very Well Done, Great Job !!!
You are an amazing engineer I love watching your videos and this is a very well built piece of equipment well done
Maszyna pierwsza klasa do domowych zastosowań. Z doświadczenia polecałbym zmienić włącznik na taki co ma lewe/prawe obroty, nie ma z tym dużo zachodu a pomaga w sytuacjach gdy drewno się zaklinuje.
TheMakbet 0
Добрый день всем земляне!
Однозначно подписываюсь и лайкаю бесконечно!
Благодарю мастер, очень нужная самоделка!
Как жаль, что невозможно такое заказать!
Я женщина одинокая и в хозяйстве дробилка мусора и веток с участка очень нужна!
Polish people.... Some of the very few bright and ingenious races on earth.... Keep up the awesome vids.
Egyptians built the pyramids thousands of years ago. What does Poland has to show for being bright and ingenious. Have you ever heard of Poland syndrome?
Alazar Tekie What Poland syndome has to do with Polish people? You just know the name of this syndome and that’s all.
„What does Poland has to show for being bright and ingenious”
Some examples: bulletproof vest, windshield wipers, blue laser - this is why you can strone so many files on your CD and watch full HD movies.
Rovers (space exploration), color photos and mine detector also called as a Polish mine detector and this time not only becouse of the surname of British scientist (Poland Syndrome, Alfred Poland)
Lol kek Kek lol wtf is polish syndrome
@@lolkekkeklol9353 well if it is like this we indians are the smartest, but idk if u know that india was earlier under british rule , actually plane was invented by an indian but the book was taken by the british, there is prrof cause some leftover of plane were. Recntly excavated in india which are older than the time right brothers invented plane. India invented zero without zero maths would have been impossible. So dont say abkut any country . Just say that humans are smart not sone people who belong to a country. India also invented shampoo, platic surgery 1000 years ago , if u want proof search it, our relegious books which were written 1000 years ago had information about atoms molecules, now what. Not only indians , egyptian or people from poland are smart , humans are smart
Because in Poland there have always been a lot of Jews, and as you know, Jews are the most gifted nation and have given many scientists to humanity.
Великолепная работа. Приятно смотреть. Удачи в будущих проектах!
Смотрел не отрываясь, магия какая -то!!!
Yes...
gn
@@randomhubhd sex picks
Thanks
Very good site and your friend's
Ya know, this guy has some amazing tools and at first I was jealous. Then I realized he made half of them himself and now I'm in awe at his skill. One day, I hope to make my own shop as amazing
Good luck with your shop 😉
.?
I've watched this twice now! I enjoyed it both times. Keep up the good work and the exciting videos for those of us who are too fond of our armchairs to get our hands dirty. Greetings from Hampshire UK, Nick
Красиво. Надежно. Функционально. Полезно. Всех благ. Всем добра.
Молодец! Руки от куда надо растут...! Дай Вам бог здоровья.. и творения...
*👍👍👍 три лайка из ЯНАО ( крайний север России )за такую работу , молодец .*
From one polish person from Australia to another EXCELLENT 👌
Всегда уважал ПРОФЕССИОНАЛОВ , а насчёт инструмента--респект!!!!!
Даже примерно СТЕСНЯЮСЬ считать на сколько сотен тысяч у него инструмента!!!
че за сварочный аппарат
@@sergejfilatov5617 да не насколько, там у них это в доступности и купить не составит труда.
@@ДонМир один полуавтомат инвертор, другая плазморезка.
Дай непрофессионалу немецкое оборудование и инструмент, он ещё не то сделает и даже лучше.
TH-cam is full of people opening boxes. This is serious engineering. I wonder how many man hours it took to make.
It took 20 minutes
@kaleb it’s amazing how simple minded some people are.
Красавчик. Заморочился сильно, но создал универсальный станок. Молодец!
Amazing job! Highest form of respect for this. Thank you for sharing it with us
Wow, I was surprised ... how professional the tools are
20 of the most enjoyable minutes I've had in a while.
Pizza
Wife: why can't you build something like that?
Me: because I own a screwdriver set and a hammer.
🤣🤣🤣🤣🤣
It's enough for MacGyver...
You build. Wife disappeared! Lol
Happy ha ha ha ha 😂😂 😂
@@bwell6863 thats what almost happen to me but thankfully we r good now with tons of tools in the store haha
These videos are the best man, take useless lengths of steel and transform it all into a tool that you will have for life, thats satisfying af
Best 20:34 mins I've spent in the last year. Man this was just amazing. I watched every second
I’ve come to expect very solid design and very good execution from you. The design on this one is particularly well done. Very robust.
I like how you show off in subtle ways. Like slotting between holes with the plasma cutter. Perfectly tangent, no grinding needed. Nice work
My most satisfying 20 and a half minutes in TH-cam.
Mine too
Ton atelier c'est le rêve !!
Chłopie złoty! Jesteś naprawdę dobry w tych klockach. Mam nadzieję, że znajdziesz wielu odbiorców. Trzymam kciuki!
You my friend are a absolute Genius !!!
If I ever have to start living off the grid , I want you as my neighbour !!
👍👍👍
Pozdrawiam z Ukrainy. Robota, jak zawsze, super. Powodzenia i zdrowia.
2 tools in one easy store and perfect around the home and home stead
No pięknie i profesjonalnie wykonana praca 👏💪😁i szacunek za Orła w koronie 👍🇵🇱🇵🇱👌
Wyszło naprawdę profesjonalnie. Z projektu na projekt tworzysz coraz to piękniejsze konstrukcje. Gratuluje umiejętności!!!
Ta sieczkarnia to nawet nie leżała przy profesjonalnym lol 🤣 brak wyłącznika bezpieczeństwa, siekiera 🪓 przyspawana do blatu po złożeniu wystaje poza zarys urządzenia LOL i w dodatku ostrzem do góry !?! To urządzenie jest wszystko inne niż profesjonalne.
Mr. Poland you're the best, brother. Pozdrav.
Easy when you have all the resources, machines and technologies. Congratulations!!!
You did an absolutely fantastic job, the only error I believe made here was that the axe head is not removable and is welded to the plate. That is a piece that will go bad and will need to be replaced easily. Again Overall Fantastic Job.
and also it could hurt the one useing it when its in the stored postion needs a cover of some sort
And an e-stop, especially if using this solo. Never know when that red button will save your life when no one is around.
Not really..
Its not relying on sharpness to do the splitting. And fasteners will tend to come loose.
It can be ground off in minutes in the rare case it needs to be replaced.
I'm much more concerned about the lack of safety features. That corkscrew is just waiting for a loose sleeve and I dont see an emergency stop.
The chopper should also have a bar to save anyone getting pulled in.
Both of these situations WILL happen eventually, with enough machines and hours, only a matter of time.
I know there is an argument for survival of the fittest/that office worker types and those lacking common sense should just stay away from dangerous machines, but anyone can get distracted, have a bad day, be in a rush.
It is worth protecting your customers.
@@rarpk3836 if it's stored, no one is using it. If some one is using it, it's not stored.
@@forestdenizen6497 I'm a big fan of the Darwin Awards myself and I have nothing against reasonable safety features/procedures.
Watching how easy you made it seem. Made me feel intimidated. Very cool and a lot of hard work. You should be proud👍🏼
If ever they ban you from the workshop, You could go into the movie making business man, because you are excellent at both.
Hats off to you in all directions. You are a compliment to mankind.
Dam it could watch that thing getting used for hours well done man you should be proud
The thought process shown here for your creativity is amazing! This machine is a monster, it’ll last a lifetime. It never gets old watching you work… Thanks for sharing, this is awesome!
Реальный мастер! Ты мой кумир !!! Благодарю за серию.
Beautiful design and fabrication. I am impressed. Quite a shop. Plasma cutter. WOW! Well done.
Finally a real craftsman and Pro DIY video producer. It's going to be a pleasure following your channel.
I don’t know why I’m watching this but that laser cutter is so cool!
That's a plasma cutter :)
Даже стыдно немного стало, что сижу без дела. Молодец мужик!
Ты берегёшь себя для защиты Родины . Вдруг война , а ты устал .
@@ВасяСивушов ахахах
Так и он не останется в стороне во время войны....он будет в помощ конструктарам по изготовке орудий и прочее
Люди творят, а у вас война на уме и Путин.
Приятно смотреть на самоделки, всё на высоте, Мастеру удачи в творчестве.
Oh thank god it has a feeder to keep hands far away i cant say how many times ive seen chippers that are just open for that alone you get my like good sir
You are a amazing genius and you have nice tools! I like your work 👍🏼
Lovely Greets from Germany ✌🏼
8:30 You know your wood chipper is heavy duty when you need to bring in the engine lift!! Fun to watch.
@helton Leandro legal cara
Bender
Man, you are dam good! Your shop is awesome! Congrats! Brazil here watching your video! For sure a like!
Это точно !
Класс! Творчество во всей красе! У таких людей в руках металлолом оживает и превращается в незаменимые вещи.
Какой металолом? Это у нас металолом, а там все новое, видать на каком то производстве все это делает, а не в гараже на коленке, как мы.
Brawo i szacunek dla młodego człowieka, za rąbarkę do drewna, ale jakie zaplecze maszyn do dyspozycji, ale gratuluję zdolności
Serious mechanical and fabrication skills!
Ju ni
Very serious !!!
да благословит же всевышний того человека, который придумал ступенчатое сверло
А в чём проблема обычным просверлить?
@@ПодрывУстоев-к7н думаю обычным нужно подбирать диаметр . Иметь 20 шт. свёрл разных диаметров.
@@sakhabur зачем подбирать? Знаешь же, какой болт у тебя пойдёт в эту дырку, такое сверло и бери. Вообще, дядька в ролике от недостатка инструмента не страдает явно.
@@ПодрывУстоев-к7н а зачем подбирать , если можно одной сверлой сверлить отверстия разных диаметров?
@@ПодрывУстоев-к7н дядька наверно время не теряет, чтобы каждый раз ставить нужное сверло .
Excellent workmanship, it does'nt get any better than this, well done.
I agree with you 100%!!!
This is the guy you want in your zombie apocolypse squad
it's a great idea , that has become a reality thanks to the application of technical knowledge. Congratulations.
Yours vídeos are hipnotics , ever , in your hands seems so easy !! Grettings from a far country caled Uruguay
Carlos Pintos *hypnotic
Thank you for this creativity, your friend from Saudi Arabia
Thank you, Poland! Very cool!
You are one talented fabricator.
No matter how amazing your work is, there always seems to be someone to give you advise on how to make it better. Idiots. Brilliant job, sir! Simply brilliant!
Why are they idiots? As an engineer, I implore people to point out flaws in my designs, and give me advice to better it.
Better quality than a lot of modern factory produce. Well done mate
An absolute beast, well done, great design and love that you always finish your projects off so well
Omg...I couldn’t believe what I was watching ...but wow what a privilege a real life magneto a true master of metals bro your a genius as well. salute and great work everything seemed perfect👍🏽👍🏽👍🏽👍🏽👏🏽👏🏽👏🏽
Super Video/ Hexler , goldene Hände der Schlosser 👍
Man,very good job!
Mistrz. Piękna robota.
Hello from United states. You are a top quality craftsman. Very precise engineering. Well done sir
You don't know how many trial and error he made 😋
Nothing wrong with trial and error. Only way to learn imo. The moat impreasive thing is this guy had the whole project mapped out in his head. The satisfaction of bringing vision to reality cant be beaten
would you say the motor could have used a strap so that it didnt like put a bunch of pressure on that bracket he made? or am I just missing where theres a relief of weight on it? just wondering, no criticism or anything towards this dude
@@alecalbain1065 I would say it doesn't need one. The motor seems more than adequately supported. The mounting bracket was built to utilize the existing threaded mounts molded with the motor housing. I feel any failure of mounting is likely to come from the motor itself. Meaning an engineering flaw within their own motor housing/anchoring design. In my opinion, the bracket its bolted to is plenty strong to support that motor on it's own.
Great piece of engineering, really liked the wood splitting. I've been using bottle jack with wide wedge in frame. Think I'll copy this machine will make extra use of branches as chips in my fire logs. Great video.
Splitting the logs by hand is more satisfying than machine plus it keep you fit.
I'm just betting you probably weigh around 400 pounds and your sitting on the couch eating a ding dong while you are typing this 😂
This man has skills!
Absolutely!
Mad skills!
Skills and tools!!!!
He's skilled👍
Only thing I’d add would be a deadman foot pedal for the splitter. Nice work. 🤙🏼
Great channel and great project! I love your channel! I am 100% polish, not from Poland but I love my Heritage! POLSKA!! John 😎👍
JOHN PIEGZIK God Bless Goodness
Watching the construction of a wood chipper and log splitter is both fascinating and educational. It's impressive to see the process of building such powerful machinery.
Awesome video, thank you so much for sharing
Greetings from Phoenix Arizona!
This is Muhammad iqbal from Pakistan your a genus everything perfect fetid you make awesome machine
genius splitter design