My first car was a 66 mustang with the 289 HiPo. My second car was an 86 Mitsubishi Conquest TSi. I always underestimated Hondas... Until I bought a 91 hatch with an ls vtec swap... B16 vtec head on a b18 none vtec block. Very built.. NA, but I wanted to turbo charge it badly, though I probably would have killed myself. These cars are Extremely fast, and everyone underestimates them. I am buying a hatch to build up again VERY soon
dude thats awsome man.. will u be making videos of it? I'd deff watch..but definitely man. hondas are very underestimated that's one of the reasons I love them. I can beat damn near any car in a race right now. I shuld be lining up wit a z06 vette soon. I'm curious on the outcome. I jus need a better trans. I get locked out alot lol
@@Forced_induction1 I will most definitely video vlog all of it!!! Oooh a Vette.... I would put my $ on your Honda for sure. Are you running the stock transmission????
I had a b20vtec with rods,pistons, race bearings, polished crank but I didn't sleeve the block and cracked the sleeve in 2 months smh. so I got a ls block cuz they always held up n so far so good. stock ls block gsr head
@@Forced_induction1 nice man , its rough i need to sleeve my 383. got a crack new my starter. wondering if i should go that route or time for another motor
15 psi on both. I never had issues on b18 pushing boost. the 1st time I went b20 I cracked the sleeves. till today not I'm still pushing 15 psi on the b18 stock bottom and holding it like a champ
Congrats on getting the car back together. 👏 looking good brother 👌 what is the setup on this one? Is it just a stock lsv or piston and rods? How much boost? Ect.. keep up the good work. 👍
I'm super excited I finally found a gsr head so I'm doing an lsv Acl race main and rod bearings scat rods nippon racing 81.5 p72 pistons aem fuel rail and fpr aem wideband x series xtd stage 4 6 puck unsprung arp head and rod bolts rc racing 750cc injectors walbro 255 fuel pump autozone shafts lol ktuned shifter p28 chipped hondata s300 v3 speed factory 4 bar map speed factory 4 port boost controller skunk2 pro intake manifold 70mm alpha throttle body gt3037 turbo I'm sure I'm missing something lol what did you get for whp??
@@itzjizmakig stock bottom end ls b18b1 and gsr head with Supertech dual springs and retainers and Supertech LMAs. 750cc bosch injectors, walbro 255 fuel pump, Skunk2 Pro Series intake manifold Skunk2 70mm throttle body
When that boost hits! 😮😮🔥🔥
I know right!!😇
Nice bro. Can’t wait to do the same set up lsv
You broke the motor in already?
it's fun bro..n yea I jus slapped a stock ls bottom end with a gsr head and called it a day lol
What do you have your vtec activation at ?
5500
My first car was a 66 mustang with the 289 HiPo. My second car was an 86 Mitsubishi Conquest TSi. I always underestimated Hondas... Until I bought a 91 hatch with an ls vtec swap... B16 vtec head on a b18 none vtec block. Very built.. NA, but I wanted to turbo charge it badly, though I probably would have killed myself. These cars are Extremely fast, and everyone underestimates them. I am buying a hatch to build up again VERY soon
dude thats awsome man.. will u be making videos of it? I'd deff watch..but definitely man. hondas are very underestimated that's one of the reasons I love them. I can beat damn near any car in a race right now. I shuld be lining up wit a z06 vette soon. I'm curious on the outcome. I jus need a better trans. I get locked out alot lol
@@Forced_induction1 I will most definitely video vlog all of it!!! Oooh a Vette.... I would put my $ on your Honda for sure.
Are you running the stock transmission????
@@fresh0678 awsome bro....n yes stock trans I need to upgrade asap.. I gotta granny shift every gear jus to get it in
That Mustang got you from that dig, stop frun tin 🤕
from the dig yea but I 100% would of passed him lol..
@@Forced_induction1 🍺
Awesome love this channel LSVTEC 👍
thank u! I appreciate that man!
Only beautiful
What was your set up prior to your swap
I had a b20vtec with rods,pistons, race bearings, polished crank but I didn't sleeve the block and cracked the sleeve in 2 months smh. so I got a ls block cuz they always held up n so far so good. stock ls block gsr head
@@Forced_induction1 nice man , its rough i need to sleeve my 383. got a crack new my starter. wondering if i should go that route or time for another motor
how much boost is the b18 running, and how much boost cracked the sleeves of the b20?
15 psi on both. I never had issues on b18 pushing boost. the 1st time I went b20 I cracked the sleeves. till today not I'm still pushing 15 psi on the b18 stock bottom and holding it like a champ
@@Forced_induction1 shoot im running a b20 on 10 psi and im a little scared idk if i should turn her down not ready for the b18 swap just yet
@@boostedsixthgen I feel u bro lol.. I jus send my shit since it's not my daily. I enjoy it without worrying lol..
@@Forced_induction1 the b18 is stock headstuds and headgasket?
@@boostedsixthgen ARP
Headstuds and cosmetic head gasket
he said oh hell nooooo
Fucking beautiful
Dan bro your car is a beast love the set up brotha 🔥🔥🔥you could of easily one that stang 😆
🤣🤣 thank u bro!! n uea 4 sure next time I'll go all in
@@Forced_induction1 welcome bro 😎 yeee💯alright bet 😆
@@dafb6dafb62 hell yea
That thing boogies!
lol thanx bro
U should just do a 40 roll better it would be a better race
yes I agree.. will try n post more races soon!
🔥🔥 I’m from NJ too I hope I can see Goliath in person some time soon 😈😈
hell yea 4 sure that b cool
car sounds great. throwing mine together next month! and of course i dropped that sub!
I appreciate u man! I jus subbed back! look foward 2 ur build!
Hell yeah thanks!!!
@@buildonemore for sure bro💪🏼
haha nice
LET'S GO!!! HONDA GANG FTW!!!💪 💪💪💪
yesssir!!!💪🏽💪🏽
You was off guard, not fair , homie scared of the b series
lmfaooo all good. he deff was scared. I could easily take that. if we ever cross paths again it's ham time
@@Forced_induction1 I seen alot of bad beat from a civic ,., He probably running over 300 hp, can't just pull on anyone,
Congrats on getting the car back together. 👏 looking good brother 👌 what is the setup on this one? Is it just a stock lsv or piston and rods? How much boost? Ect.. keep up the good work. 👍
thank u ° I appreciate it!! it's a stock bottom end , gsr head springs, retainers, and lost motion. on 15lbs
I'm super excited I finally found a gsr head so I'm doing an lsv Acl race main and rod bearings scat rods nippon racing 81.5 p72 pistons aem fuel rail and fpr aem wideband x series xtd stage 4 6 puck unsprung arp head and rod bolts rc racing 750cc injectors walbro 255 fuel pump autozone shafts lol ktuned shifter p28 chipped hondata s300 v3 speed factory 4 bar map speed factory 4 port boost controller skunk2 pro intake manifold 70mm alpha throttle body gt3037 turbo I'm sure I'm missing something lol what did you get for whp??
@@itzjizmakig damn nice I like what I hear! I made 410hp on my setup! 15lbs
@@Forced_induction1 oh nicee and what was that exact setup?? I'm curious what I can make
@@itzjizmakig stock bottom end ls b18b1 and gsr head with Supertech dual springs and retainers and Supertech LMAs. 750cc bosch injectors, walbro 255 fuel pump, Skunk2 Pro Series intake manifold Skunk2 70mm throttle body
Sounds real good bro!
thank u man!🙏
Dope !!
thanks!
Sounds so good
thanx🙏
🤣🤣 he said oh hell no!!