Great video thanks , I have a question, I have a greenworks pro 2700 electric pressure washer and it has reduced power so took it apart yesterday and the oil inside looked like chocolate milk so I assume it needs new water and or oil seals after watching your video , there was also liquid leaking out of the motor itself not sure how but it was , I can not find a rebuild kit for the pump or a new pump either , there are no numbers on anything that I can find so my question is where can I find a rebuild kit ? The set up looks just like the one here in this video thank you for any help and once again a great video
Most pressure washers like this have seals and valves that are almost identical. But when the power of the pump increases, it makes a difference. Any O-rings can be used. The size should be correct. Also measure the sizes of all seals, search online with that, you will get it. If bought as a kit, it may not be correct. Also check with the company's service department. Thank You!
Dude! Where did you get the springs from?? I've tried all the popular online parts places,but none have or just don't sell them. They want to sell a new complete pump,which I understand,but I'm not in the market for one. Rather just replace the springs & reseal the damn thing.
De hecho, es el sello de aceite, pero se instaló al revés porque en ese momento no había un sello nuevo disponible. Al invertirlo, la máquina pudo funcionar un tiempo más sin ningún problema. La máquina se usó durante unos tres meses y medio sin inconvenientes. Más tarde, cuando los sellos originales estuvieron disponibles, fueron reemplazados. El video de eso también está en el canal.
Woodpecker High Pressure Washer Model : APW VH 130 P Working Pressure : 130 Bar(1900 PSI) Working Flow Rate : 6.5 L/Min Motor Capacity : 2500 W Power Supply Voltage : 220 V 50 Hz
I changed my water and oil seals still there is no pressure in my pressure washer, what could be the reason? My machine was kept in garage for many years I cleaned all parts and changed oil also, I am not professional mechanic just trying to learn how to fix it by watching your vedios - pls help me
@@bigvmedia no issues called the STARQ, they asked me to replace the entire Pressure Head with Cut off costing 2,500/- as my cut off was stuck and was not coming out to replace. I order a new ST-250 for 3900.🙏🙏🙏
Simmering Oil seal is leaking, this is not good, that is why there was no oil in it, always replace it with a new oil seal, the stretch has gone and they have hardened, now it goes wrong again!! 9:10
100 clips went through
Finally I found
Great teacher
More clips about domestic appliances repairing please.
Thanks,🇱🇰🇱🇰🇱🇰🇱🇰
More to come!. Thank you
Thank you
Thanks for your tutorial. I'm doing DIY on my water jet pressure. Really appreciate it.
Glad it helped
I have a car washer, but I don't know where the manual is, so I can't find out how to change the oil.
Now I know.
Thanks.
welcome
Great video thanks , I have a question, I have a greenworks pro 2700 electric pressure washer and it has reduced power so took it apart yesterday and the oil inside looked like chocolate milk so I assume it needs new water and or oil seals after watching your video , there was also liquid leaking out of the motor itself not sure how but it was , I can not find a rebuild kit for the pump or a new pump either , there are no numbers on anything that I can find so my question is where can I find a rebuild kit ? The set up looks just like the one here in this video thank you for any help and once again a great video
Most pressure washers like this have seals and valves that are almost identical. But when the power of the pump increases, it makes a difference. Any O-rings can be used. The size should be correct. Also measure the sizes of all seals, search online with that, you will get it. If bought as a kit, it may not be correct. Also check with the company's service department. Thank You!
Thank you for the information I appreciate it
We're I can buy oil seal water seal and others item for travino.
try online
Thanks. Great video, very helpful!
Glad it was helpful!
Nice video, very short and simple way to explain. Please make a video on unloading valve and i want to know water seal size.
We will try
Dude! Where did you get the springs from?? I've tried all the popular online parts places,but none have or just don't sell them. They want to sell a new complete pump,which I understand,but I'm not in the market for one. Rather just replace the springs & reseal the damn thing.
Try these links
www.ubuy.co.in/product/I6RP9ULUO-karcher-pressure-washer-piston-spring-genuine
www.indiamart.com/proddetail/suction-delivery-valves-and-springs-for-car-washer-ll03-25269310412.html?mTd=1
fr.aliexpress.com/w/wholesale-car-washer-piston-spring.html?spm=a2g0o.detail.search.0
You can get it aliexpress
Thank-you Mr.Robot
You are welcome ❤
Have we only use 20w-40 oil type only?
No, It's better to use single grade non detergent based oil.
Çok teşekkür ederim tam olarak benim makinam ve tam olarak aradığım video. Harika anlatım. abone oldum.
Çok teşekkür ederim.
Excellent video, but with a serious flaw.
(6:40m) The seals were assembled backwards
(5:55m) When the old ones were removed
Thanks
9.08m its corrected. Even if it is reversed it will work no problem. But running without oil can sometimes cause the center to roll down.
Do the michien have brasers and why do itgos of when it is hot
brasers means?
Where did you get the replacement springs ?? I need some 😬
from the service Centre
www.woodpeckerindia.in/enquiry.html
Please show us dismantleling from ameture side what is inside how to clean brushes ameture housing.
This is brushless induction motor. Will post the requested video as soon as possible. Thanks
Thanks bro
அருமை ❤
Thank You
Sir its very good & Thankyou 🎉
Most welcome
Beli sperpartnua di mana om
Boleh dibeli secara online. Syarikat mana yang anda mahukan?
Good guy❤
Thank You ❤
@@bigvmedia your welcome bro.
Thanks for sharing this information., Love from India
Welcome 👍
Thank you very much
You are welcome
Pusiste los sellos de agua donde va el aceite se te va salir el aceite para salir de apuros esta bien pero igual se dañara la maquina
De hecho, es el sello de aceite, pero se instaló al revés porque en ese momento no había un sello nuevo disponible. Al invertirlo, la máquina pudo funcionar un tiempo más sin ningún problema. La máquina se usó durante unos tres meses y medio sin inconvenientes. Más tarde, cuando los sellos originales estuvieron disponibles, fueron reemplazados. El video de eso también está en el canal.
Donde puedo conseguir los casquillos de plástico con dientes
¿Has buscado en línea? O puede obtenerlo del centro de servicio.
Wate is the reason presser water coming to body
check and replace water seal :)
Really good video but why have the really irritating piano music !!!! It just distracts and gets in the way.
Let's try not to be like that in the next videos. Thanks
What is the size of the Bearing ?
Your machine pls?
@@bigvmedia AGARO Supreme High Pressure Washer, Car Washer, 1800 Watts
Car washer ki thrust bearing kahan per milegi
www.indiamart.com/proddetail/thrust-bearing-washer-11302230791.html
Thanks ...
You're welcome!
At 9:40, isn't that water seal turned the wrong way?
No, that’s correct. It appears that way because it is positioned above the piston.
@@bigvmedia check the third and last seal, it's positioned the opposite way in relation to the others.
Can you tell me the model of this project please
Woodpecker High Pressure Washer
Model : APW VH 130 P
Working Pressure : 130 Bar(1900 PSI)
Working Flow Rate : 6.5 L/Min
Motor Capacity : 2500 W
Power Supply Voltage : 220 V 50 Hz
Where to buy oil seals?
Try online or service centers
Tqvm
Where we can get the spare parts?
Mobile 086060 48787
honda@woodpeckerindia.com
THANK YOU,
You are welcome!
I changed my water and oil seals still there is no pressure in my pressure washer, what could be the reason? My machine was kept in garage for many years I cleaned all parts and changed oil also, I am not professional mechanic just trying to learn how to fix it by watching your vedios - pls help me
Check and clean gun and its nozzle. Check motor speed. Also check piston springs and unload valve.
Check the gear that connected the motor to the pump
Any service center in Bangalore pls. From Jst Dial all I am getting is Car Repair or Car Wash Center numbers
Sorry bro, I don't know if there is a service center in Bangalore.
@@bigvmedia no issues called the STARQ, they asked me to replace the entire Pressure Head with Cut off costing 2,500/- as my cut off was stuck and was not coming out to replace. I order a new ST-250 for 3900.🙏🙏🙏
www.industrybuying.com/pressure-washer-accessories-powerwash-CLE.PRE.106557414/?Google&PLA&PLA_Private_Label_Rest&gad_source=1&gclid=CjwKCAjwkJm0BhBxEiwAwT1AXAxz_yncZKnL_X7fVWZiuMTbCEOtJmotxyqXgj50zFoOEDkNIJyAwxoCb5oQAvD_BwE
@@bigvmedia wow itna Kam mei mil rahaa hai, not sure why service center asked 2500
yes
Tnx bro
You are welcome
Thanks 🎉
You're welcome 😊
جزيل الشكر
مرحباً!
Tank you
welcome
❤❤❤ thanks
Welcome
Simmering Oil seal is leaking, this is not good, that is why there was no oil in it, always replace it with a new oil seal, the stretch has gone and they have hardened, now it goes wrong again!! 9:10
Already changed. Watch part 3 video. Thank you!
Shut the music off it is very hard to concentrate
We'll address it in the next video. Thank You
Goede uitleg 👍
Heel erg bedankt mijn vriend
مرحبا
شكرًا
اريد2قطعه
رقم الموديل من فضلك
اريد قطع غيار
Model number?
YOU SHOULD WOR IN NASA
ممكن ترجمه
يمكنك استخدام الترجمة التلقائية
CUT YOUR NAILS
Sorry... It's my own emergency tool for my day to day works
sir need help
How may I assist you?