During watching video I observed one small correction that ~@13.42min. you explain that Tube Pitch. Tube Pitch is 1.25times of Tube OD. Not Shell, You said in the video shell. Pls. correct later. Overall Good informative video. Keep it up.
#coolingsystems #coolingtowers #havc # #watertreatment #wastewater #technology #engineering #power #energy #water Cooling Tower is basically a heat rejection devise or heat exchanger in which water and air are brought into contact with the purpose of lowering the temperature of the water. It’s not surprising that cooling tower technology lends itself to many applications including refineries, power plants, natural gas processing plants, and commercial, Heating, ventilation, and air conditioning(HVAC) systems. techproces.com/cooling-tower/
Sir this video is very much informative, but I have following doubts - 1) What is the main difference between baffles & passes ? 2) Usually in pharma or chemical industry people called this heat exchanger as a Condenser, why so ? & What is main difference between condenser & heat exchanger ? 3) We generally define this heat exchangers capacity in terms of m2 ( square metres) like 6 m2, 12 m2 What is the reason & calculations regarding this ? Sir, This are the most commonly asked questions in interview & lots of people having doubt on it. So I request you to please clear all these doubts, & if possible make seperate video on it........ Thank You........!!!!
1) Baffles are used in HEX to support tubes and also toincrease cross flow velocity(which increases turbulent flow and so heat transfer increases). Passes:- means how many times fluid changes its direction. Ex:- 1,1 S&T means shell side fluid will enter from one side and exit from other without any changing direction and same for tube side. 1,2 S&T HEX means fluid will enter from one side flows through HEX one time and leave wherease there will be a one pass in HEX and so due to this fluid will first flow from part above pass one time and then part below pass 2nd time.
2) Condensor as well as evaporator both are considered as heat exchanger. In Condenser we are condensing the hot gas and so we are taking heat from it and so cold fluid temperature increases.Note:- Due to phase change temperature of hot line curve will be constant.
1) What is the main difference between baffles & passes ? Baffles are the in shell supporting the tubes and same no of drilled holes on it as tube sheet . Tube side Passes are decided on the both the headers / dish ends on both side 2) Usually in pharma or chemical industry people called this heat exchanger as a Condenser, why so ? & What is main difference between condenser & heat exchanger ? Heat exchanger is general term used its common name of the job where as condenser , evaporator , oil cooler are the proper name of the same job depends on its use. Condenser is one who condenses the gas to liquid form of fluid (normally refrigerant in chiller ) 3) We generally define this heat exchangers capacity in terms of m2 ( square metres) like 6 m2, 12 m2 What is the reason & calculations regarding this ? its the surface arae of the total tubes inside heat exchanger , outer perimeter x length is surface are of one tube x no of tubes gives are of heat exchanger www.youtube.com/@santoshpatil7912
sir you are amazing and all your video about mechanical engineering is good and also easy to understand the topic. please make video on mechanical seal used in pump and reactor.
If you help me to design helical coil heat exchanger? Helical coil is immersed in stationary cold water and compressed air flowing through the helical coil. Will you suggest the design procedure?
Hello sar main Pakistan se hun aapki video bahut acchi hai shukriya aapka mujhe mil raha hai ka interview dena hai meherbani Karen Meri dayari karvayen
Sir next banav jo ne shell side pressure drop increase or decrease hoy to su karvu pade or tube side pressure drop vadhare hoy su karvu in heat exchanger
#coolingsystems #coolingtowers #havc # #watertreatment #wastewater #technology #engineering #power #energy #water Cooling Tower is basically a heat rejection devise or heat exchanger in which water and air are brought into contact with the purpose of lowering the temperature of the water. It’s not surprising that cooling tower technology lends itself to many applications including refineries, power plants, natural gas processing plants, and commercial, Heating, ventilation, and air conditioning(HVAC) systems. techproces.com/cooling-tower/
Baffles are the in shell supporting the tubes and same no of drilled holes on it as tube sheet . Tube side Passes are decided on the both the headers / dish ends on both side www.youtube.com/@santoshpatil7912
Bahot bahot bahot achhe tari ke se Samjaya Aap me
Mene TH-cam pe sare chennal dekh liye pr aap se behtar koy nahi sja sakta 👍👍👍
Channel head k bad ek head cover bhi aati hai sir wo ap ne nahi bataya but jo bhi bataya ap ne shandar or lajwab bataya❤️❤️❤️❤️
Aapke video mein Kafi Achcha aap explain Karte Hain bahut Achcha lagta hai pura samajh mein Aata Hai thank you sir
Very easy to understand for students.good job .
#Gate Chemical Planet
Bahut acchi tarh se explain kiya h apne sir 🙏🙏
Vahhh sir apka samjane ka tarika bahot achaa che thank you
This video is very helpfull to understand this topic.Thank you so much sir and keep doing such a great job...😇💖
बहुत ही शानदार तरीके से बताया आप ने👏👏🙋
During watching video I observed one small correction that ~@13.42min. you explain that Tube Pitch. Tube Pitch is 1.25times of Tube OD. Not Shell, You said in the video shell. Pls. correct later. Overall Good informative video. Keep it up.
Yes I thought the same... It's tube pitch > tube diameter
For brief regarding Heat exchangers
th-cam.com/video/PVxamFEQA-w/w-d-xo.html
Your teaching is so good
सर बहुत शानदार समझाया आपने......
Very Nice...... Heartily Thanks
Very nice topic considered 👌.
Please go through deeply inside so beneficiary to all.
Thank you Sir 👍😊.
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
Bahut badhiya video sir
Very informative vedio brother thanx
Nice tutorial indeed..
Small correction..at 13.41..tube pitch should be 1.25 times tube dia. ( you have mentioned as shell dia)..
For brief regarding Heat exchangers
th-cam.com/video/PVxamFEQA-w/w-d-xo.html
Thank you so much ❤️ Sir ji mai aapki hi college se hun Government Polytechnic budaun
Sir bahut hi gjb video h thanku sir 🙏💕
Bahut umda sir👌👌👌
Congratulations you have explained very good information but it is just logically
Please refer TEMA
You will get very very good knowledge
Very nice video
Your each video informative.
Gud. Keep it up. Bahut bdia video hai becz I’m working in industry
Dost aap Aise hi video banate raha karo kafi helpful hain apki video
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
Thanks, Good Information Sir 👍
Very very informative video
👌👌👌👌👌
Aaj jo kuchh bhi pta nhi tha sab clear ho gya
Sir Bhaut he accha apne heat exchanger per topic diya sir dil se danavad
Very nice information thanks dear
very well explained i always use this channel to learns topic
please make a series in transport phenomenon( vector and tensor notation and all....)
For brief regarding Heat exchangers
th-cam.com/video/PVxamFEQA-w/w-d-xo.html
Very beneficial for us ... Thank you sir
All vdos are good ....
Good 👍 teaching 💯
Very well explained sir ✨ make more videos of such industrial equipments, Thank you.
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
@@chemicalengineering7364 Thanku So Much Sir ✨
Good explained
appreciate
Bro,Jo aap ne exchanger ke bare me explain kra hai, o I bundle hai ya u tipe bundle hai
Good and very helpful video. keep it up
Hello Sir
Sir,kya shell side me hi Hot fluid flow krate he ya, tube side me bhi kra skte...?🙏
Sir viscous or corrosive fluid woh sabhi sqare tube agreement ma hi ayega na ?
Same heat exchanger are used in two parpase.cooling & heating sir ?
Mast video Sir. Sab acche se samjh a gya.
Very nice explained sir
Good one video on heat exchanger ..Keep it bro..
#coolingsystems #coolingtowers #havc # #watertreatment #wastewater #technology #engineering #power #energy #water
Cooling Tower is basically a heat rejection devise or heat exchanger in which water and air are brought into contact with the purpose of lowering the temperature of the water. It’s not surprising that cooling tower technology lends itself to many applications including refineries, power plants, natural gas processing plants, and commercial, Heating, ventilation, and air conditioning(HVAC) systems.
techproces.com/cooling-tower/
Sir square tupe arrenge me tube km kese use hote hai
Wahh yr bhai kya samjhaya he bhai aapne
Excellent
Nice explained sir thank you very much 🙏🙏🙏
Thank you sir aap bahut acha padhta ho 🙏🙏
Very nice explain
great video
Nice work sir ji
Good explanation sir..
Very nice video sir ji ❣️
Sir this video is very much informative, but I have following doubts -
1) What is the main difference between baffles & passes ?
2) Usually in pharma or chemical industry people called this heat exchanger as a Condenser, why so ?
& What is main difference between condenser & heat exchanger ?
3) We generally define this heat exchangers capacity in terms of m2 ( square metres) like 6 m2, 12 m2
What is the reason & calculations regarding this ?
Sir,
This are the most commonly asked questions in interview & lots of people having doubt on it.
So I request you to please clear all these doubts, & if possible make seperate video on it........
Thank You........!!!!
1) Baffles are used in HEX to support tubes and also toincrease cross flow velocity(which increases turbulent flow and so heat transfer increases).
Passes:- means how many times fluid changes its direction. Ex:- 1,1 S&T means shell side fluid will enter from one side and exit from other without any changing direction and same for tube side. 1,2 S&T HEX means fluid will enter from one side flows through HEX one time and leave wherease there will be a one pass in HEX and so due to this fluid will first flow from part above pass one time and then part below pass 2nd time.
2) Condensor as well as evaporator both are considered as heat exchanger. In Condenser we are condensing the hot gas and so we are taking heat from it and so cold fluid temperature increases.Note:- Due to phase change temperature of hot line curve will be constant.
1) What is the main difference between baffles & passes ? Baffles are the in shell supporting the tubes and same no of drilled holes on it as tube sheet . Tube side Passes are decided on the both the headers / dish ends on both side
2) Usually in pharma or chemical industry people called this heat exchanger as a Condenser, why so ?
& What is main difference between condenser & heat exchanger ? Heat exchanger is general term used its common name of the job where as condenser , evaporator , oil cooler are the proper name of the same job depends on its use. Condenser is one who condenses the gas to liquid form of fluid (normally refrigerant in chiller )
3) We generally define this heat exchangers capacity in terms of m2 ( square metres) like 6 m2, 12 m2
What is the reason & calculations regarding this ? its the surface arae of the total tubes inside heat exchanger , outer perimeter x length is surface are of one tube x no of tubes gives are of heat exchanger
www.youtube.com/@santoshpatil7912
well explained sir
Sir mane heat transfer increase krana hai to passes or baffle dono ka use kr skte hai Kiya...??
Amazing brother 🙏
Very easy explanation
IMPORTANT INFORMATION SIR
PLEASE EXPLAIN DESIGN PROCEDURE IN DETAIL.
Ok very soon dear
excellent teach
sir you are amazing and all your video about mechanical engineering is good and also easy to understand the topic. please make video on mechanical seal used in pump and reactor.
For brief regarding Heat exchangers
th-cam.com/video/PVxamFEQA-w/w-d-xo.html
If you help me to design helical coil heat exchanger?
Helical coil is immersed in stationary cold water and compressed air flowing through the helical coil. Will you suggest the design procedure?
Soppperrr sir g very soppperrr amazing
Great work sir..!
keep preparing more videos for interview purpose.
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
Heat exchanger oil cooler air cooler and chillar cooling towar ripering and new manufacturing ranupal933@gmail.com from Delhi
1.25 inch me gap rakhna hai ya 1.25 milimeter me ?????
Agar sir hm hot fluid shell se inlet na krke tube ke top se inlet krde to kya hoga
textile industry mai boiler ke liye kaun sa heat exchanger use hota hai
*thanks sir* 👍
Sir plzzz termal analysis pr bhi ek video bnai heat exchanger ki
Sir kaya tube me amoniya gas bhi use karte hai
Very nice
Very nice sir ji
It is Very knowledgeable video.
Thank you sir 👍
Nice video sir pls show us shell and tube heat exchanger hydrtesting procedure
Excellent lecture 🙏😭👌 better than uni. proff
Nice 👌
Hello sar main Pakistan se hun aapki video bahut acchi hai shukriya aapka mujhe mil raha hai ka interview dena hai meherbani Karen Meri dayari karvayen
Ammonia ice plant par shell tube condensor chal jayega kya
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
Bahut achchhe shyam
धन्यवाद सर , अच्छा ज्ञान दिया. Fabrication Drawing Kaise Pada jata Hai ?
Sir tube hot fluid pass hota hai ya cold fluid
good teaching skill sir i need convection topic lecture
Very nice explanation...👏👏
Sir Or bhi video banaye distillery plant ke upr
Osm osm...best video ever i seen 🙏
Haaa
Sir one video air cooler use in industry
Ok bahut jalde he
Thank you so much sir 👍👍👍👍👍
Nice explanation!
Excellent sir
Sir please upload a video about shell and tube pass arrengement along with flow patterns.
Very clear explanation
For brief regarding Heat exchangers
th-cam.com/video/PVxamFEQA-w/w-d-xo.html
Sir aap interview ke baare m aap kafi kuch batate h
Pr sir kiya aap yeh bta sakte h ki jea (production) ka exam crack kese kre.
Sir please tell me. 🥺🥺
Sukria Bohot maja aaya g
Hydrotest ke liye kitna pressure use karte h
Sir sparklur filtar pe b videos banayye
Sir next banav jo ne shell side pressure drop increase or decrease hoy to su karvu pade or tube side pressure drop vadhare hoy su karvu in heat exchanger
#coolingsystems #coolingtowers #havc # #watertreatment #wastewater #technology #engineering #power #energy #water
Cooling Tower is basically a heat rejection devise or heat exchanger in which water and air are brought into contact with the purpose of lowering the temperature of the water. It’s not surprising that cooling tower technology lends itself to many applications including refineries, power plants, natural gas processing plants, and commercial, Heating, ventilation, and air conditioning(HVAC) systems.
techproces.com/cooling-tower/
Baffle ki quantity kiske depend hoti hai
Sir tube sehi material pass kiya jata hai na
Which fluid should be used in shell side and which fluid should be used in tube side.
Shell and tube Heat exchanger design and parts
pharmaguides.in/shell-and-tube-heat-exchanger/
Good
Sir caladirya ka bhi full video banaye
Sir , kindly Shell and Tube heat exchanger ki thermal analysis pr bhi video bnai plzzzz
Good job brother
Sir baffles or passes ka same he function h kya
Nhi doono ka kaam alag hai
Baffles are the in shell supporting the tubes and same no of drilled holes on it as tube sheet . Tube side Passes are decided on the both the headers / dish ends on both side
www.youtube.com/@santoshpatil7912
Sir Shall k and water runing hta hna or tube me gas