@@outdoorsinthe608 I would guess it will. But ill also be waiting to see your results. I was surprised some of that ash was as high in moisture as it was for sitting for 2 years. Not bad just higher than i thought.
Hello from sunny California I love the way you prep all the work stations and then saw saw saw and cut cut cut and stack stack stack . You get a lot done in a short time and keep it clean. Thx and have a great day
Not having to stack is such a time saver. Sometimes it’s necessary to do it and you just have to bite the bullet and get it done as quickly as possible
That auto cycle with the correct wedge height is hard to beat!! You’re really knocking out the wood. Feels good to get a big pile done!! Enjoyed it!! 👊🏻👊🏻
We just put up a similar tent over ware we stack out of the trailer so we can keep working in the rain and keep that hot summer sun off us . Now we just gota keep it from blowing away lol . Nice job on ya ash pile .
I like the no stacking pile technique with the stack on the outside. It's nice to see you guys enjoying some time together on the lake. I like your style brother.
Mt.608 looks awesome!!! Back before youtube, I did something similar in my driveway but didn't stack it on pallets 😂😂. I wish I knew what I knew now back then 🤷♂️ You definitely streamlined your process with the WolfeRidge and that conveyor, it's great to see your progress. 🍻 see ya on the next one!!
I like looking at the pile from the road driving by!😂 Setup can’t sometimes be tedious but the 22RS and the conveyor work pretty well together! Thanks Jack👍👊🍻
Looks like the 22RS has eliminated some steps in the process to speed things up! That leaves more time for dinners on the lake! Life is great in the 608! Take care Jeremiah 👊🏻🍻
Mounds are never done...Maybe for the that day but never done! You can just keep adding pallets as more Ash comes in! Looks really nice! But the evening on the water looked even nicer!😎
Mount 608 looks pretty good! Be interesting to see if the center of the pile dries as quickly with the stacked sides as what Chris says his bins do with the pallet sides
I think I would add one more pallet down the center on top of the two on the bottom. This will allow more air into the pile from the bottom. I, also think that pallets wired together let more air in the pile than stacked wood on the sides. Woodyard is looking great!
With the moisture levels being almost ready to burn when split. His process will be just fine, and I don't see a single stick going bad from air flow myself!👍
Another one on top of the one that is already in the middle? Pallets on the side definitely would be better but I am short on pallets right now. Thanks James!!👍👊
In a few years I will be upgrading to a commercial splitter, it will definitely be a Wolfridge but it will be a tough decision on which splitter to buy. Thank you for your videos and they will help with the decision.
Mabe 30x10x6 feet, approximately. Using the UNSTACKED WOOD rule of 180 cubic feet for split 16" wood. Thats something like 10 cords. Not counting the stacked edges. . . For the box store splitters, i find replacement of an engine that spins around 3,100rpm with a engine that spins at 3,600 rpm shaves about 4 seconds off the cycle time. Then going to a 16gpm pump over the 11gpm pump does wonders as well. Can be near 8/10 seconds over the original 18/20 second cycle time.
I have very little wind or sunshine. So my rule is no more then 6 feet to the deepest part of the stack. With the pallets underneath, your holding to my drying rule of thumb.
Nice work 👍 About the 22rs splitter- will it break up 30” rounds of hardwood? I’m looking to possibly get one myself. I get tree service wood. Everything is pretty huge.
Yes for sure especially if you use the single wedge. I do mostly tree service wood also and very rarely have something that it will not split. I am very happy with the 22 RS!! Thanks👍👊
Jeremiah split give it time for season and dry for up coming winter 🥶 for firewood 🪵 SALE . Remember you got to stock firewood 🪵 to sale firewood 🪵 buddy 😊. Wolf ridge got to pay for it self in the wood 🪵 yard unless it a tax break on the account book 📖. 😊
@@outdoorsinthe608 temperature for your feedback that helps once again me and my lady friend enjoy watching your videos and we're going to be very soon getting into the firewood thing probably just for a hobby but who knows where it could lead in any case we really enjoy it 😎
Your lucky 🍀 LIFE GREAT IN THE 608 😊 and LIFE POOR 😢IN THE 709 😂 buddy . Buyer stop 🛑 buying lobsters 🦞 on the wk - end . Newfoundland and Labrador got the market full with COLD HARD SHELL LOBSTERS 🦞 plus there full with meat to Jeremiah. 😊
Definitely filling up the stacks with the new tools!
It’s a beautiful thing! Thanks Heath 👍👊
Hey Jeremiah , Mt 608 is awesome . Nice looking lake . Glad yall had a nice time and a nice dinner . 👍🏻🇺🇸
It really is! Looks cool from the road😂 Lake life is the best! Thanks Del👍👊
The 22RS made a mountain of wood for sure. Nicely done Jeremiah!
It’s a beautiful thing! Thanks Bob👍👊
Great system Jeremiah. Nice pile of wood. Love the tractor. 👍🏻
Thanks Noel!👍👊
Hello Jeremiah, nice setup under cover🪵👍🏼🇺🇸
Hey Larry and Robin! Sometimes it’s nice to just be out of the sun. Thank you👍👊
Jeremiah I'm really liking how that wood bunk is turned out
Me too, I just hope the wood seasons well in it! Thanks Mike👍👊
@@outdoorsinthe608 I would guess it will. But ill also be waiting to see your results.
I was surprised some of that ash was as high in moisture as it was for sitting for 2 years. Not bad just higher than i thought.
@@TheRustyGarageandHomestead me too, just goes to show when in log form the wood does not completely season.
Wood yard is looking good Jeremiah, ash is cash 👍
Thanks Len!!👍👊
Nice wood pile! Fun to watch the 22RS and the new wedge.
Thanks Todd!👍👊
Cool view of the lake !
We love being on the lake! Thanks Tom👍👊
Awesome set up,
I love it when a plan comes together
Fine job on a good video
Me too! Thank you👍👊
Mountain 608 looks good, great to see your caught up, 22rs sure seems to make all the difference for you! See ya in 2 weeks 👍
Now to see how well it seasons! Love that splitter!! Awesome glad you’re coming up!! See ya soon👍👊
Pounding that ash out nicely Jeremiah., one heck of a Mt. 608. Catch ya next time , have a great week🍺☑️
The pile is pretty cool! I like looking at it from the road when driving by😂 Thanks Richy have a great one👍🍻👊
The pile is looking great!
Thanks! 👍👊
Hello from sunny California
I love the way you prep all the work stations and then saw saw saw and cut cut cut and stack stack stack .
You get a lot done in a short time and keep it clean.
Thx and have a great day
Hey sunshine Gary! Prepping is key!!😂 Thank you sir👍👊
Not having to stack is such a time saver. Sometimes it’s necessary to do it and you just have to bite the bullet and get it done as quickly as possible
It sure is! I definitely still will stack, but it sure is easy to pile instead!! Thanks Joe👍👊
That sure is a nice pile of wood! Great video! - Tim
Thanks Tim!👍👊
That auto cycle with the correct wedge height is hard to beat!! You’re really knocking out the wood.
Feels good to get a big pile done!!
Enjoyed it!! 👊🏻👊🏻
I love running the perfect size rounds real fast! A great feeling to have it done, but now I’m getting low on rounds! Thanks Jacob👍👊
A lot of burning in that pile! Take care Jeremiah!
For sure! Thanks Rod👍👊
Great solo work with your commercial machine…! Gotta love auto cycle….! Time to relax now…!!!
Auto cycle is so nice especially with the right wood! Thanks Ken👍👊
Great job in the 608!!
Thanks Mom!!👍❤️
We just put up a similar tent over ware we stack out of the trailer so we can keep working in the rain and keep that hot summer sun off us . Now we just gota keep it from blowing away lol . Nice job on ya ash pile .
They sure don’t like the wind! Thanks Phil👍👊
RTB! Nice!
Close, very close! Thanks Mike👍👊
Man, those are some good looking piles 👊
Thanks!👍👊
Really nice view from the lake or boat
We love being on the lake in the boat! Thanks Aaron👍👊
Your production has increased a lot since you're not stacking, the 22rs, and when Amanda helps!! Stay Hydrated and Have a Safe Day
For sure! Thank you David 👍👊
Good work, Jeremiah.
Thank you Bill👍👊
I like it!
Thanks for the idea!
I like the no stacking pile technique with the stack on the outside. It's nice to see you guys enjoying some time together on the lake. I like your style brother.
It worked well as far as the side staying up. We love to be on the lake!! Thanks Kenny👍👊
Great video, nice mix for headphones, bravo!
Thanks Bill👍👊
Great video Jeremia, good to see you working out of the bucket, its a real back saver. Cheers from HB NZ
It sure is! Cheers Cliff👍👊
Good work Jeremiah, you aren’t going to need that 12-way next week.
Thanks Brent! See ya soon👍👊
Looking good Jeremiah, can't beat ready to burn Ash.
You got that right! Thanks Ted!!👍👊
I bet getting all of the ash split and put in place is a good feeling 👍👊🍻 thanks Jeremiah
Definitely! The ash log pile sat long enough!! Thanks Ken👍👊
Mt.608 looks awesome!!! Back before youtube, I did something similar in my driveway but didn't stack it on pallets 😂😂. I wish I knew what I knew now back then 🤷♂️ You definitely streamlined your process with the WolfeRidge and that conveyor, it's great to see your progress. 🍻 see ya on the next one!!
I like looking at the pile from the road driving by!😂 Setup can’t sometimes be tedious but the 22RS and the conveyor work pretty well together! Thanks Jack👍👊🍻
Good feeling to have that done I bet!
For sure! Thanks Brian👍👊
Looks like the 22RS has eliminated some steps in the process to speed things up! That leaves more time for dinners on the lake! Life is great in the 608! Take care Jeremiah 👊🏻🍻
It has for sure! As you now know it is amazing how much you can get done with a commercial splitter!! Thanks Todd👍🍻👊
Mounds are never done...Maybe for the that day but never done!
You can just keep adding pallets as more Ash comes in! Looks really nice! But the evening on the water looked even nicer!😎
You are right! It was a great night with my love!! Thanks Wayne👍👊
Mount 608 looks pretty good! Be interesting to see if the center of the pile dries as quickly with the stacked sides as what Chris says his bins do with the pallet sides
I definitely am interested to see how it dries in the middle also. My next pile I plan to do a little different.... Thanks Eli👍👊
I think I would add one more pallet down the center on top of the two on the bottom. This will allow more air into the pile from the bottom. I, also think that pallets wired together let more air in the pile than stacked wood on the sides. Woodyard is looking great!
With the moisture levels being almost ready to burn when split. His process will be just fine, and I don't see a single stick going bad from air flow myself!👍
@@waynetharp :He mentioned in the video that he was having a mold problem. I'm just trying to help solve a problem....
Another one on top of the one that is already in the middle? Pallets on the side definitely would be better but I am short on pallets right now. Thanks James!!👍👊
I use the canopy also ,got one for you. I also have a fan hanging off the canopy keep me cool, use the generator hope it works for you , good video
Great idea! Thanks Digger👍👊
In a few years I will be upgrading to a commercial splitter, it will definitely be a Wolfridge but it will be a tough decision on which splitter to buy. Thank you for your videos and they will help with the decision.
You definitely can’t go wrong with any of the products Wolfe Ridge offers! Thank you Paul 👍👊
Love it Jeremiah! Let's try to get harbor freight to sponsor our channels (pop tent, right?) keep cuttin'!
Not sure where I got it, but the tent is pretty crappy. It really don’t like the rain! Thanks Travis👍👊
Mt Ashborer
Yes!!
Whoop Whoop👍‼️
Thanks!! 👍👊
Ash is almost ready to all be burnt.
It definitely is close!👍👊
Mabe 30x10x6 feet, approximately.
Using the UNSTACKED WOOD rule of 180 cubic feet for split 16" wood.
Thats something like 10 cords.
Not counting the stacked edges.
.
.
For the box store splitters, i find replacement of an engine that spins around 3,100rpm with a engine that spins at 3,600 rpm shaves about 4 seconds off the cycle time.
Then going to a 16gpm pump over the 11gpm pump does wonders as well.
Can be near 8/10 seconds over the original 18/20 second cycle time.
I have very little wind or sunshine.
So my rule is no more then 6 feet to the deepest part of the stack.
With the pallets underneath, your holding to my drying rule of thumb.
I’m not sure I definitely should measure it! Thanks David👍👊
ASH IS CASH Jeremiah 😊
You betcha!!😂👍
Nice work 👍
About the 22rs splitter- will it break up 30” rounds of hardwood? I’m looking to possibly get one myself. I get tree service wood. Everything is pretty huge.
Yes for sure especially if you use the single wedge. I do mostly tree service wood also and very rarely have something that it will not split. I am very happy with the 22 RS!! Thanks👍👊
Looking great Jeremiah. That's a heck of a pile of firewood. How many cords do you estimate are in that pile? Stay safe.
Not sure how much is there but I should figure it out. Thanks Francis👍👊
Jeremiah split give it time for season and dry for up coming winter 🥶 for firewood 🪵 SALE . Remember you got to stock firewood 🪵 to sale firewood 🪵 buddy 😊. Wolf ridge got to pay for it self in the wood 🪵 yard unless it a tax break on the account book 📖. 😊
I m hoping the pile will be ready to sell by fall, but we will see. For sure the ash... The splitter is definitely earning its keep!!👍👊
Man! TH-cam un subscribed me! I gotta get a tent, the heat is coming!
Don’t get a cheap one like mine! Thanks for subscribing again😂 Have a great one Steve👍👊
Just wondering, your phrase. Life is great and the 608. What does that mean it's Greek to me ? 😊
“Life is great in the 608”. 608 is the area code where I live. And it’s great… most of the time.😂👍👍
@@outdoorsinthe608 temperature for your feedback that helps once again me and my lady friend enjoy watching your videos and we're going to be very soon getting into the firewood thing probably just for a hobby but who knows where it could lead in any case we really enjoy it 😎
Your lucky 🍀 LIFE GREAT IN THE 608 😊 and LIFE POOR 😢IN THE 709 😂 buddy . Buyer stop 🛑 buying lobsters 🦞 on the wk - end . Newfoundland and Labrador got the market full with COLD HARD SHELL LOBSTERS 🦞 plus there full with meat to Jeremiah. 😊
I hope the market turns around for you! Thanks Leonard👍👊