This makes total sense. I have a mobile home with old stab outlets and several are warming up. I always change them with regular outlets and I never have that problem
Very useful video. I'm in the UK. Our outlets are fed from 32 amp breakers. The sockets themselves are rated up to 20 amps. These get warm too, but only when you are using more powerful appliances. The plug on my oil radiator is warm-ish and that's drawing 8.6 amps at 230 volts. The lower the voltage, the higher the amps.
Thank you. I will certainly check the connections because I am pretty sure that is what is going on since only half the outlets on that circuit are getting warm. Will advise,
I have a question for you sir “and by the way thank you for the information it is very helpful”.. Now here is my problem, I am remodeling a mobile home and of course all of the receptacles are stabbed, my GFCI in the master bathroom also connects to the exterior outlet in the backyard.. When I went to replace the GFCI I noticed that the HOT black connection is melted but the gfci never tripped, the lady of the house uses a small space heater in the winter when she gets out of the shower. What do you think is the issue?
I installed Stelpro model#PCH4.8, 240 volt 4800 watt electric heater into my garage (purchased used off of Facebook Marketplace). I installed a double pole stablock 30 amp breaker along with 10-2 wire. I bought a Leviton nema 6-30R receptacle and everything seemed to work ok. My problem is the end of the heater's cord gets very warm during operation (the two flat plug terminals are too hot to touch)... why is this?
Nature's Friends.. I have a 220v outlet in my garage for a heater. What would make the cord get warm where it plugs into the outlet? Not hot but it does get warm. Is this normal?
Most likely the prongs of the plug are not making good contact with the blades inside the outlet - common as receptacles wear out over time and the blades lose their tension and do not grip the prongs securely.
Use a premium receptacle and pigtail your wires. At the end of the day, if you installed it the way the manufacture specifies is appropriate and it warms up, the manufacture is negligent and should be held accountable. And, yes, I've actually seen those outlets fail (I believe it was a place that used space heaters regularly).
Thanks so much for this. I just unplugged a 1500 watt smart heater from my orange extension cord. This is the first time i noticed when i unplugged the heater in the greenhouse the cord plug end where i plugged in the heater was really hot. If i get a 1000 watt heater and use it with the extension cord will that be ok? Ive seen heaters that are 250 watt as well. I only need to heat a 4x8 space. Thank you so much. I had also recently changed my pinned outlets to using a "hook" for the connected wires.
Overload is due to wire gauge and the quality of the outlet itself. That’s why a commercial grade or higher outlet is worth installing. They outlet don’t work loose as quick as the low end residential grade outlets.
Mine are getting to about 100-120F on my space heater. Just the heater plug though, if I use an extension cord (and yes a proper 14/3 one) the plug gets warm but the outlet Isn’t really but a tad above room temp.
Hello sir, Great video!!! I’m having a situation now, i got a new washer machine 10 amps and when I plug 🔌 it the outlet sparks ⚡️. it only sparks when I plug the washer. I understand it has the most amps compare to the others appliances where I have it located. Also it is plugged to a gfci outlet. Now let me tell you about the breaker where i plug it. It is a 20 amps breaker and I noticed that breaker supply my refrigerator 6.5 amps and another outlet which I use it to charge cellphones and and 1 led light with low amps as well. Now when I use the washer machine, only the refrigerator is pulling amps and the rest are unplugged. Do you think is the refrigerator plugged in the same outlet causing the sparks ? Even though the outlet are separated but coming from the same 20 amps breaker. Sorry if this is too much writing and hope I won’t confused you. Thanks!!
I think I have a socket that is doing just that, I have an electrical outlet that is warming up & there is a space heater in another plug that is on the other side of the wall. Is this dangerous, can this start a fire?
Thank you so much for this info!! Would you be able to explain to me why the prongs on the cord of my electric space heater got really hot?? I don’t use it anymore. But would there be any danger inside that outlet I should be concerned about?? Thank you!!
Same here in bathroom but not in kitchen. Had outlets replaced using heavy duty replacements at my brothers suggestion. But not schooled in this, so dont know what was really used. Thank you. Will try at lower temp as suggested.
i have a GFCI receptacle in gargage. I have plugged into it a freezer. NP. But I plug in a security cam and now the Cam and power adapter gets very hot. I then plugged in security cam in house and not hot at all. Is this due to the freezer using the CFCI receptacle?
I installed a 125v 20a GFCI outlet last night, and one of thw wires had burned up to where an inch and a half of copper wiring was exposed. I put heat shrink over the exposed length and an extra half inch (this is on a boat from 1978, so the wiring might be due for replacing). I kept feeling that it was somewhat warm after installing. I dunno if I should be terrified and worried about a possible fire hazard. Nothing's plugged in, but I heard the light and current running through could make it warm. It doesn't feel hot to the touch, but i can definitely make out a bit of warmth. Should I be concerned or is that normal?
I've got an unusual problem. For 20 years, an outlet of mine has had a six outlet brick thing plugged into so multiple items can be plugged in. But now I can't get the six outlet thing out, no matter how much i pull. For many years there was a space heater plugged into it. So maybe its melted in? I can't get any access to the original outlet because the six outlet brick completely covers it. It still works fine but this really sucks because I want to plug in a surge protector. Any thoughts, next steps? Thanks! Its also in a cold basement room.
Thank you so much for this information. Think I almost burnt my house down. Thank you so so much
Glad to help Happy New Year
G[ad to help.
We use space heaters but I don’t put them on high ever so it’s supposed to be 900 watts on med or less on low thanks you explain things very good
Thank you for explaining this in such a clear way. Also I heard this before about heaters, but I didn't know this about ac's.
Thank you for watching. Glad to help.
This makes total sense. I have a mobile home with old stab outlets and several are warming up. I always change them with regular outlets and I never have that problem
good lord this guy is real good . loved how he stayed space heater or ac .
Thank you for watching.
Very useful video. I'm in the UK. Our outlets are fed from 32 amp breakers. The sockets themselves are rated up to 20 amps.
These get warm too, but only when you are using more powerful appliances. The plug on my oil radiator is warm-ish and that's drawing 8.6 amps at 230 volts. The lower the voltage, the higher the amps.
You are right glad you liked it hope you enjoy our channel Don't forget to subscribe Thanks
“Ampacity” haha, I love it, thank you!
I am glad thanks for watching
Thank you.
I will certainly check the connections because I am pretty sure that is what is going on since only half the outlets on that circuit are getting warm.
Will advise,
Thank you for watching, and yes let me know it you get it, Thanks
Learn something new everyday, thank you very much.
Thank you for watching glad we could help.
very helpful, makes sence, thank you it solved my problem.
Glad to help out hope you enjoy our channel.
Gave me Understanding. I was getting really concerned & nervous!!!!!! Thank you, sir!
I have a question for you sir “and by the way thank you for the information it is very helpful”..
Now here is my problem, I am remodeling a mobile home and of course all of the receptacles are stabbed, my GFCI in the master bathroom also connects to the exterior outlet in the backyard.. When I went to replace the GFCI I noticed that the HOT black connection is melted but the gfci never tripped, the lady of the house uses a small space heater in the winter when she gets out of the shower.
What do you think is the issue?
I installed Stelpro model#PCH4.8, 240 volt 4800 watt electric heater into my garage (purchased used off of Facebook Marketplace). I installed a double pole stablock 30 amp breaker along with 10-2 wire. I bought a Leviton nema 6-30R receptacle and everything seemed to work ok. My problem is the end of the heater's cord gets very warm during operation (the two flat plug terminals are too hot to touch)... why is this?
Nature's Friends.. I have a 220v outlet in my garage for a heater. What would make the cord get warm where it plugs into the outlet? Not hot but it does get warm. Is this normal?
Yes it will get warm try to use a size 12 or 14 gauge cord thanks for watching
Thanks for helping me with this man!! I was experiencing exactly this thing
Glad to help Thakes for watching.
Most likely the prongs of the plug are not making good contact with the blades inside the outlet - common as receptacles wear out over time and the blades lose their tension and do not grip the prongs securely.
Helpful information, thank you for sharing !!
Use a premium receptacle and pigtail your wires. At the end of the day, if you installed it the way the manufacture specifies is appropriate and it warms up, the manufacture is negligent and should be held accountable. And, yes, I've actually seen those outlets fail (I believe it was a place that used space heaters regularly).
You are right, Heaters are the worst. Thank you for watching.
Thanks you are real helpful
Thanks so much for this. I just unplugged a 1500 watt smart heater from my orange extension cord. This is the first time i noticed when i unplugged the heater in the greenhouse the cord plug end where i plugged in the heater was really hot. If i get a 1000 watt heater and use it with the extension cord will that be ok? Ive seen heaters that are 250 watt as well. I only need to heat a 4x8 space. Thank you so much. I had also recently changed my pinned outlets to using a "hook" for the connected wires.
Yes 1000 watt would be better, make sure the cord is not curled up.
Overload is due to wire gauge and the quality of the outlet itself. That’s why a commercial grade or higher outlet is worth installing. They outlet don’t work loose as quick as the low end residential grade outlets.
You are right Thanks.
Thank you, sir, amazing video.
Thank you for watching, hope you like more of our videos.
Mine are getting to about 100-120F on my space heater. Just the heater plug though, if I use an extension cord (and yes a proper 14/3 one) the plug gets warm but the outlet Isn’t really but a tad above room temp.
That sounds right. Thanks for watching
Hello sir,
Great video!!!
I’m having a situation now, i got a new washer machine 10 amps and when I plug 🔌 it the outlet sparks ⚡️. it only sparks when I plug the washer. I understand it has the most amps compare to the others appliances where I have it located. Also it is plugged to a gfci outlet.
Now let me tell you about the breaker where i plug it. It is a 20 amps breaker and I noticed that breaker supply my refrigerator 6.5 amps and another outlet which I use it to charge cellphones and and 1 led light with low amps as well. Now when I use the washer machine, only the refrigerator is pulling amps and the rest are unplugged.
Do you think is the refrigerator plugged in the same outlet causing the sparks ? Even though the outlet are separated but coming from the same 20 amps breaker.
Sorry if this is too much writing and hope I won’t confused you.
Thanks!!
You can call me we can talk about it 434-284-0600
I think I have a socket that is doing just that, I have an electrical outlet that is warming up & there is a space heater in another plug that is on the other side of the wall. Is this dangerous, can this start a fire?
I would take it out and check the wires and see if they are loose.
You can call me if you want 434) 284) 0600
Thank you so much for this info!! Would you be able to explain to me why the prongs on the cord of my electric space heater got really hot?? I don’t use it anymore. But would there be any danger inside that outlet I should be concerned about?? Thank you!!
Turn the breaker off and check if the wires are stabbed if so rap the wire around the screw and tighten the screw.
Harold Shifflett Thank you so much!! Loving your channel!!! 👍
Thank you
Same here in bathroom but not in kitchen. Had outlets replaced using heavy duty replacements at my brothers suggestion. But not schooled in this, so dont know what was really used. Thank you. Will try at lower temp as suggested.
Thank you for posting this. I'm redo All my receptacles to be sure. 🤗 Many blessings to you.
Glad to help hope you enjoy our channel.
Thanks good demonstration make sense.
i have a GFCI receptacle in gargage. I have plugged into it a freezer. NP. But I plug in a security cam and now the Cam and power adapter gets very hot. I then plugged in security cam in house and not hot at all. Is this due to the freezer using the CFCI receptacle?
I do not know sorry I will think on this one.
I installed a 125v 20a GFCI outlet last night, and one of thw wires had burned up to where an inch and a half of copper wiring was exposed. I put heat shrink over the exposed length and an extra half inch (this is on a boat from 1978, so the wiring might be due for replacing). I kept feeling that it was somewhat warm after installing. I dunno if I should be terrified and worried about a possible fire hazard. Nothing's plugged in, but I heard the light and current running through could make it warm. It doesn't feel hot to the touch, but i can definitely make out a bit of warmth. Should I be concerned or is that normal?
You should be fine It was loose joint just keep a eye on it , Thanks for watching Merry Christmas.
I've got an unusual problem. For 20 years, an outlet of mine has had a six outlet brick thing plugged into so multiple items can be plugged in. But now I can't get the six outlet thing out, no matter how much i pull. For many years there was a space heater plugged into it. So maybe its melted in? I can't get any access to the original outlet because the six outlet brick completely covers it. It still works fine but this really sucks because I want to plug in a surge protector. Any thoughts, next steps? Thanks! Its also in a cold basement room.
Can you text me a picture up close of your brick 434) 284)0600 i can help you
I do not charge you .
I'm surprised how backstabbing is still legal.
So how about a voltage drop test under load?
Also, how about using a thermal imaging device?
Yes all that would work, Thank you for watching
Thank you!
Could this also happen for a light switch if you recently plugged in a Christmas tree to the same wall?
Yes was the switch turning on the tree
Yes it could if not repaired
THANK YOU VERY MUCH.
You are welcome thank you for watching.
Thank you, Sir. Your video saves lives.
Thank you for watching
Can u run 2 water pump from one plug
You can call me at 434 -284-0600
@@TheNaturesFriends please reply cause i need to no
@@TheNaturesFriends the plug is run straight from the breaker so i just wan to no if i could run 2 waterpump
@@blackknite2518 What is the amps of motor what size wire
2:39 3:08 2:55
I have nothing plug in it it’s still getting hot
What is pluged in downstream and check and see if wires are tight on rec.
Thank you
Thank you for watching Happy Year.
Can this cause a fire?
@@Multifire910 Thanks for the info.
THANK YOU
Thank you for watching.
Mines an ice maker
di ba church of god ang dating daan yan?,kay soriano? sila ba namumutol? tsk,tsk
Hey it's not my receptacle it's the head of the Orange plug is hot and cut the power up stairs