You can cut a thread with the stock and die squarely in the lathe without all of this. No need to make anything. Anyway, I don't use a die..........I screw cut all ofl my threads in the lathe. Use the star wheel and chasing dial and it doesn't take long to cut a thread. Metric/imperial. Internal/external. I use a die to clean a thread.
Why did you make the insert piece? Do the dies come in different outer diameter sizes that you wanted to change them? Otherwise why not make it one piece?
Absolutely great idea and badly needed. The whole tap and die system is absurd. For both taps and dyes the centre of force needs to be directly behind the work piece so as to ensure everything is centering correctly. So why do we have to endure these stupid torque bars allying a force far from the work piece held on by badly gripping grub screw? . Come on manufacturers the system is screaming out for change.
OK rất đẹp, chúc anh một ngày mới Luôn vui khỏe nha 👍🌺🌺🌺👍👍
nôž na ďaleko - velmi škaredé opracovanie
🙏
Америки не открыл но за труды лайк!
Maybe 😃
Great video
Thanks a lot ❤️
Лайк за креативное мышление.
Thanks a lot ❤️
Өте керемет шыққан керек зат екен
Thanks ❤️
Многофункционально!!! 👍
Nice info, thanks for sharing :)
Thanks a lot 🙏❤️
Полезная вещь👍.
Сам бы такую хотел под км3.
thank u so much : )
спасибо за видио👍
❤️
Ottima idea e ottima esecuzione, sarò costretto a copiarla !!! Complimenti !! 😊
Thanks for persuading me 🙏🙂
SUPER !!!!!!👍👍👍👍👍👍👍
❤️
good job, keep it up 👌👌👌
Thank a lot ❤️
@@metallantik you are welcome
I am proud of you♥
❤️🙏
Muito legal 👏👏👏👌. Brasil
thanks dear
ROĐENI MOJI ŽELIM NAMA I SVIMA BOŽJI BLAGOSLOV. UŽIVAO SAM GLEDAJUĆI IZRADU OVOG LIJEPO I TOČNO IZRAĐENOG ALATA ZA KVALITETNO NAREZIVANJE NAVOJA .
Thank u so much ❤️🙏
Excellent
Mobarake
Gracias por compartir !
You're welcome ❤️
Salut pequenieo el tornico pero bueno dale cniaa un saludo👍👍👍👏👏👏🤚🇪🇸🇹🇩
🙌❤️🙏
Nice
Thanks ❤️🙏
Beautiful and unique😍👏
❤️
بينظيري هادي جونم😍❤️
Fadaatam 😘🤩❤️
Dziękuję za naukę
you're welcome ❤️🙏
been wanting to make one of them.
❤️🙏
thanks mister
🙏❤️
richtig toll 😍👏
Vielen dank ❤️❤️
Very good
Thank u Amooza 😛
What take paper to the outer surface for a final finish that can all be done in the speeds in the feeds.
amazing😍👏
❤️
😍nice
Nugget 😛
👍👍👍
❤️
You can cut a thread with the stock and die squarely in the lathe without all of this. No need to make anything.
Anyway, I don't use a die..........I screw cut all ofl my threads in the lathe. Use the star wheel and chasing dial and it doesn't take long to cut a thread. Metric/imperial. Internal/external.
I use a die to clean a thread.
Absolutely correct
But sometimes it is useful
Thanks for watching ❤️🤩🙏
Good video. I thought your lathe was running a bit slow though. I would have tried a higher spindle speed to get a better surface finish.
correct🙏❤️
Thanks for your guidance🤩
@@metallantik lll
Fantástico
Thanks a lot ❤️
😍😍😍
Все отлично ,но поделить штангелем это престижнее для токоря чем марке
Thanks a lot 🙏🙂
You may want to use 2 drops of oil next time.
👌🙏
What is the lathe name and model nr you using?
Lamico , made in Iran 🙂❤️
@@metallantik Thank you for the repley,when ever you have time,please please do a review video on it?!🙉🙊
@@rooikatza Sure ❤️🙂 ، where r u from ?
هیچی متال آنتیک نمیشه 👌
Fadat
Mantap
❤️🙏
👏👏🥰
❤️
U just have a loose vise that u hold with your hands?!?!
Yes 🙂
Why did you make the insert piece? Do the dies come in different outer diameter sizes that you wanted to change them? Otherwise why not make it one piece?
Yes exactly, their sizes are different .
Thanks for watching ❤️🙏
14,5mm am teil sind aber 13,5mm 😂. Auch wenn das Maß keine Funktion hat. Sonst aber Ok gemacht 👍
Absolut korrekt 😬👌
ich danke dir ❤️🙏
когда наждачка в кадре с токарным станком можно смело дальше не смотреть.
Absolutely great idea and badly needed. The whole tap and die system is absurd. For both taps and dyes the centre of force needs to be directly behind the work piece so as to ensure everything is centering correctly. So why do we have to endure these stupid torque bars allying a force far from the work piece held on by badly gripping grub screw? . Come on manufacturers the system is screaming out for change.
Thank you very much my dear friend ❤️🙏
My thumbdown is mostley for the anoying thumb up advertising
And a bit for the poor machining
Anyway thank u so much for watching my video and 4 pointing ❤️🙏