And bottom line, it works very well. I’ve used the Vs indoors, outdoors, with a wide variety of program and found them immune to compression at stunningly high level considering the footprint of the system. For my first use, I didn’t even know they were passive boxes. The clear separation of vocals from instruments at very high volumes is quite a feat for any system, but from a single amplifier channel, it is just jaw dropping.
I think it would be wise than assemblers indicate the brand and reference of the speakers they install in their boxes. 80% of the brands are assemblers. It would also be very interesting to know if the transducers are from manufacturers' catalogs like JBL or B&C or RCF if these transducers are manufactured under specifications.
When you buy d & b speakers you actually buy a complete system, complete with amplifiers. As a system, it sounds awesome. I really don`t care if they use RCF or JBL drivers because neither RCF or JBL makes anything that sounds as good... ;)
I think they use b&c drivers, at least in the mid and hi sections, just by looking. Their drivers 8 inches and below are easy to spot. The sealed mid with the heat sink is an original b&c design, but it is really cool how d&b thought to use it, with air flow from the woofers to the ports cooling it down even more!
Give this D&B rep a freaking raise! This guy answered every question without breaking a sweat! Can’t wait to order a D&B system!
And bottom line, it works very well. I’ve used the Vs indoors, outdoors, with a wide variety of program and found them immune to compression at stunningly high level considering the footprint of the system. For my first use, I didn’t even know they were passive boxes. The clear separation of vocals from instruments at very high volumes is quite a feat for any system, but from a single amplifier channel, it is just jaw dropping.
demonstration was spot on, killed it!
heard them at BPM they sound FANTASTIC and you can stand near it no problem...
I think it would be wise than assemblers indicate the brand and reference of the speakers they install in their boxes. 80% of the brands are assemblers. It would also be very interesting to know if the transducers are from manufacturers' catalogs like JBL or B&C or RCF if these transducers are manufactured under specifications.
When you buy d & b speakers you actually buy a complete system, complete with amplifiers. As a system, it sounds awesome. I really don`t care if they use RCF or JBL drivers because neither RCF or JBL makes anything that sounds as good... ;)
I think they use b&c drivers, at least in the mid and hi sections, just by looking. Their drivers 8 inches and below are easy to spot. The sealed mid with the heat sink is an original b&c design, but it is really cool how d&b thought to use it, with air flow from the woofers to the ports cooling it down even more!
If you want to know the prices, here they are..average about $30k for 2 speakers, 2 subs, 1 amp.
...and still excellent.
Good video but We want to know the price of each unit, watts RMS, we want to know all about it.
Very nice box's. R they available in the U.S.? Also, how much Power, RMS, Price would be nice as well. Thank u.
When u want to know the price on YT, then u got not enough money to pay a half of the J8 ^^
How much this speaker are?
Only Hindi