Great video and informative would this brushless motor be case of just changing the standard motor over to the brushless or is there some modifications needed. Thanks again for the video
@@stubbox8629 depends on the gun you want to put it in. Some internals of the gun may not hold up to the increased torque, like the piston for example.
@@stubbox8629 i would put a better piston in and better gears, yes. You can find strong cnc gears on Solink's website, check the video's description. There is a link and a discount code if you order from them.
Hi Dexter, i tried mine with and without the anti reverse, personally i find it smoother without but i cannot quantify it... again many thanks for the advice... Having to build gearboxes without the anti reverse is a god sent!
Hey uh any idea on how much I can push on a stock g&g mcp 556 Edit: I just want to change the motor due to heat and maybe I should change to a lower 9.6v battery
@@HikiZIMA if you end up changing to this, or any brushless motor, there will be no more heat. Period. Now, how much RPM, i have no idea, it all depends on: gear strength, spring used, piston weight etc. a 30k should be fine for most builds.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
Great video and informative would this brushless motor be case of just changing the standard motor over to the brushless or is there some modifications needed. Thanks again for the video
@@stubbox8629 depends on the gun you want to put it in. Some internals of the gun may not hold up to the increased torque, like the piston for example.
@DeXteR.AIRSOFT hi ya yeah it's pretty much stock inside so just wandered if it would be ok to put in. Or would it be wise to upgrade the gears ect?
@@stubbox8629 i would put a better piston in and better gears, yes. You can find strong cnc gears on Solink's website, check the video's description. There is a link and a discount code if you order from them.
Buenas! El motor solink brushless soporta baterias de 14.8V?
@@magnus1604kurtz yes, it works with 4s batteries, but I personally don't see the point, as it's super high speed already
Great bro are these motor compatible with titan mosfet? any issue?
@@wilsonliang8678 compatible, no issues.
@@DeXteR.AIRSOFT Thanks bro😀
hi there!
will leaving the anti-reverse in the gearbox affect it's operation with the v5 in anyway?
@@BLADEMANDAD no, it won't. I did not remove it for the tests, and it was fine
@@DeXteR.AIRSOFT , thanks mate, much appreicated
Hi Dexter, i tried mine with and without the anti reverse, personally i find it smoother without but i cannot quantify it... again many thanks for the advice...
Having to build gearboxes without the anti reverse is a god sent!
@@BLADEMANDAD it's nice for sure, but i would not say 100% necessary
@@BLADEMANDAD Is it quieter without the anti-reversal latch?
do ypu have any stima of TPA for this motor? as it can be regulated by rpm and torque... i would like to know the posibilities of this
@@Fenrix666 i don't really get the question. The TPA is not relevant in a brushless motor. It will have the same torque at 15k and at 46k rpm
@@DeXteR.AIRSOFT how can it have the same torque with an adjustment torque system?
@@Fenrix666 you adjust the speed, and the startup current. Torque is the same
@@DeXteR.AIRSOFT ohhh, now i understand, thanks mate
Hey uh any idea on how much I can push on a stock g&g mcp 556
Edit: I just want to change the motor due to heat and maybe I should change to a lower 9.6v battery
@@HikiZIMA if you end up changing to this, or any brushless motor, there will be no more heat. Period. Now, how much RPM, i have no idea, it all depends on: gear strength, spring used, piston weight etc. a 30k should be fine for most builds.
@@DeXteR.AIRSOFT ok thanks then I will get the solink lite and a m100 spring
@@DeXteR.AIRSOFTan update after some digging I was able to get the v5 and board for roughly 750yuan. Half the price, not sure how but work as intended