Could no longer find the website so I paused the video and made the supplies list. Thought it might be helpful for someone else :) 4 x 1.5” Half inch pvc pipe 2 x ½” 90 degree elbow 2 x 15” of 2” pvc pipe 2 x 2” to ½” reducer 2 x 10” zip ties 1 x 2” cap 1 x ½” ball valve 1 x valve stem (for car tire) 1 x can of pvc glue
I made four of these for our church to use to celebrate the end of a giving campaign. Only change I made was to install a pressure gauge to ensure we don't overpressurize AND to allow us to pressurize it with an air compressor instead of a bike pump. :)
That is so cool! could you send me some pictures? I am making a few of these for my kindergarten group at my church at I wanted to see where you would place the gauge
I am wondering if you could help me out. I have a party where I’m using a 360 photo booth and I would like to make one of those cannons. However I try to take a picture of the parts list and it comes out blurry can you help me out?
It’s not safe. PVC gets brittle under pressure and can crack and blow with repeated pressurizing. Also the joints aren’t rated to withstand pressure so end caps and joints can and will blow.
Could no longer find the website so I paused the video and made the supplies list. Thought it might be helpful for someone else :)
4 x 1.5” Half inch pvc pipe
2 x ½” 90 degree elbow
2 x 15” of 2” pvc pipe
2 x 2” to ½” reducer
2 x 10” zip ties
1 x 2” cap
1 x ½” ball valve
1 x valve stem (for car tire)
1 x can of pvc glue
You missed the 2 x 2 inch coupler
You are why the internet is so great! Thank you
I made four of these for our church to use to celebrate the end of a giving campaign. Only change I made was to install a pressure gauge to ensure we don't overpressurize AND to allow us to pressurize it with an air compressor instead of a bike pump. :)
That is so cool! could you send me some pictures? I am making a few of these for my kindergarten group at my church at I wanted to see where you would place the gauge
Wanting to do this for a community musical finale. Thank u
love this channel
hoping for more uploads
Nice
Can’t believe u didn’t at least show this cannon in action
Will it also shoot T- shirts? Or will a larger diameter pvc be needed?
Thank you
thank you for this very usefull 👍👍
I am wondering if you could help me out. I have a party where I’m using a 360 photo booth and I would like to make one of those cannons. However I try to take a picture of the parts list and it comes out blurry can you help me out?
It’s not safe. PVC gets brittle under pressure and can crack and blow with repeated pressurizing. Also the joints aren’t rated to withstand pressure so end caps and joints can and will blow.
Leave Karen
How much do you charge for these already made? Where can I purchase 1?
Where can i find the parts list?
just do a screen shot.
How psi do you pump this up to?
Are these reusable?
yes
with how much pressure can I fill the cannon?
my compressor only goes to 100psi. I haven't tested past that.
@@stacytrot thanks
cuanto cues para que me mandes uno saludos
how to make a bomb
It cost me 25$
DO NOT BUILD ONE OF THESE! I FOLLOWED SPECIFICATIONS AND IT EXPLODED WITH LESS THAN 80 PSI OF AIR IT IT! THIS IS EXTREMELY UNSAFE.