Worlds Best Rescue Boat! Horizon Harbor Tug Boat first look and comparison!

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2024

ความคิดเห็น •

  • @MrMad2424
    @MrMad2424  2 ปีที่แล้ว +1

    Buy this boat here
    www.horizonhobby.com/product/horizon-harbor-30-inch-tug-boat--rtr/PRB08036.html?gclid=Cj0KCQiAgP6PBhDmARIsAPWMq6mIj0nWsNEwHCFJQItIekuJWtsYRpVofLWHu6P03H7aOmKls9zWtKEaAl_WEALw_wcB

  • @Frapop
    @Frapop 5 หลายเดือนก่อน +1

    Hello, is there a function in the remote control that shows a low battery level or is there another way to show a low battery level? And one more question: is the water shooting function available immediately or do I need to buy something else?

    • @MrMad2424
      @MrMad2424  5 หลายเดือนก่อน +1

      You need to buy the water pump for the water cannon to work. Theyr is no function on the remote that shows the battery voltage. The boat will run for an hour or so on a 6000mah pack

    • @Frapop
      @Frapop 5 หลายเดือนก่อน +1

      @@MrMad2424 ok. and does it slow down when the battery runs out or will it stop immediately because in my trx4 the car slows down when the battery runs out

    • @MrMad2424
      @MrMad2424  5 หลายเดือนก่อน +1

      @@Frapop it will slow down and give you about 20% throttle in burst to get back to shore.

  • @the40735
    @the40735 2 ปีที่แล้ว +2

    Nice. Just did a brushless conversion on a proboat react 17 and man this thing has wayyyy more power than it needs on 3s. I'm eventually gong to do some gps speed runs.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      Brushless upgrades are fun for sure.

  • @79ltd
    @79ltd 2 ปีที่แล้ว +3

    Warning for anyone purchasing this boat. The universal drive shaft joint will strip the first time the prop hits a weed and it raps the shaft. Really doesn't take much resistance before you need a rescue boat to get your rescue boat. Other than that weakness, a fantastic rescue boat. Horizon needs to fix the joint. This is not an inexpensive boat.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว

      Haven't had any issues with mine so far.

    • @79ltd
      @79ltd 2 ปีที่แล้ว

      @@MrMad2424 I was really surprised how quickly mine stripped out. Both the brass and plastic stripped. JB Weld fix it.. Check out my cool flip with the 42. th-cam.com/video/i8s1rIEB5Pw/w-d-xo.html

    • @Wazza722
      @Wazza722 8 หลายเดือนก่อน

      Doesn’t mean you won’t!

  • @FLSharkdiver
    @FLSharkdiver 2 ปีที่แล้ว +1

    Thanks for sharing mate! Finally gave in and just bought the #Proboat Horizon Harbor 30" Tug Boat from #HorizonHobby for my main retrieval boat for #MissGeico Twin 36'', #BlackJack42'' and my #TFL Hydro 36'' speed boats. I'm also going to adding on board remote wireless little camera so I can see where i will be going from shore..

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      That's Awesome. Congrats on the boat.

  • @specialized29er86
    @specialized29er86 2 ปีที่แล้ว +1

    I've ordered one and am going to strip all the deck stuff and I'm going to use it to launch my surf fishing bait.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +2

      That's awesome. Congrats on the boat.

  • @Robcadams1974
    @Robcadams1974 3 หลายเดือนก่อน +1

    Don't you have a mini cam compatible with goggles on yours? If so can you put a link where to buy?

    • @MrMad2424
      @MrMad2424  3 หลายเดือนก่อน +1

      No, unfortunately I do not have a fpv cam for the rescue rig.

  • @rattlecanonlexan836
    @rattlecanonlexan836 2 ปีที่แล้ว +1

    Nice video!!!

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      Thanks Big bro.

  • @johnnyjackson4490
    @johnnyjackson4490 2 ปีที่แล้ว +1

    whats up my man ,i know that you have the motley crew boat by aquacraft. what i want to know is were can i get parts for it because i have one just sitting in my shad for the last two years. its such a nice looking boat just going to waste so i want to get it runing.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      Www.offshoreelectrics.com should have what you need as far as electronics and rudder hardware.

    • @johnnyjackson4490
      @johnnyjackson4490 2 ปีที่แล้ว

      Thanks I'll check it out.

  • @davidray3855
    @davidray3855 2 ปีที่แล้ว +1

    Do u have the spartan boat

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      No I don't have that boat.

    • @davidray3855
      @davidray3855 2 ปีที่แล้ว

      Just wondering what size prop to get

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว

      @@davidray3855 Prather 220 or a x442 Octura. I think that boat has a 4mm prop shaft if so you'll need an adapter to take up the slack so you can use the 3/16 size props. OSE sells the adapters search 4mm to 3/16 prop shaft adapter. Or just change out the prop shaft to 3/16. Good luck with it.

    • @Wazza722
      @Wazza722 8 หลายเดือนก่อน

      Why ask that!

  • @pitbikecookracing3324
    @pitbikecookracing3324 2 ปีที่แล้ว +1

    No kidding , they took a page out of your book . 🤠👍👊

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +2

      😎 Sure did!. Thanks Bro.

  • @francescogalliano8479
    @francescogalliano8479 2 ปีที่แล้ว +1

    Interessante molto fedele a quello vero!!!! Dove si compra???

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      www.horizonhobby.com/product/horizon-harbor-30-inch-tug-boat--rtr/PRB08036.html?gclid=CjwKCAjwtcCVBhA0EiwAT1fY76Qr0w8OBc-LYXu70WnDMIuwmy0W79HOmkcegXyAEeNh6L-cJ_Xk6hoClb0QAvD_BwE

  • @TorKungChannelRC111_Retrogames
    @TorKungChannelRC111_Retrogames 2 ปีที่แล้ว +1

    Wow......😄👍👍👍👍👍👍

  • @nwirc
    @nwirc 2 ปีที่แล้ว +1

    They are awesome rescue boats but have to be very careful handling it. I have mine on hand even with my self-righting boats.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      Yes, very true! Self righters break down also for sure.

  • @garrettkifer8332
    @garrettkifer8332 2 ปีที่แล้ว +1

    Seeing the Atlantic Tug makes me wish Aquacraft never went away. Sometimes I think they had better boats than ProBoat given the technology at the time.

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +1

      Love that boat. It's great.

  • @CoachD386
    @CoachD386 2 ปีที่แล้ว +1

    👍🏾💯🔥

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +2

      Thanks Big Bro!

  • @treyrahman
    @treyrahman 2 ปีที่แล้ว +2

    Its tooo damn much for a recovery boat in my opinion ! But its the only one proboat is pushing so 🤷🏽‍♂️

    • @MrMad2424
      @MrMad2424  2 ปีที่แล้ว +3

      One rescue of your expensive boat and its paid for itself. Kinda like buying car insurance if you look at it that way.

    • @treyrahman
      @treyrahman 2 ปีที่แล้ว +2

      @@MrMad2424 true.

  • @andreasbuttner-land1890
    @andreasbuttner-land1890 2 ปีที่แล้ว +1

    Hi MrMad2424, the hatches of this tug boat can be easily sealed with tape and even the big hatch, if you would craft a simple plastic lid for it and then you'll have a pretty much storm proof tug boat. I can promise you, that it's great fun to sail a storm proof tug boat on a windy day with nice waves. And you can produce really nice looking videos with it. It's so much more, than a recovery boat, but the biggest fun isn't at first glimpse that obvious.
    I've simply copying my comment from video to video, because I'm hoping to see one day ta video about this model in big waves. I have made my Baltimore storm proof and it's really great fun to run it in big waves.
    I just got a link to this video here: th-cam.com/video/cS76pOw02ls/w-d-xo.html

  • @Alan-jx5hn
    @Alan-jx5hn ปีที่แล้ว +2

    Not worth anywhere near 449.99 dollar, i see it at 60-70 dollar RC boat

    • @MrMad2424
      @MrMad2424  11 หลายเดือนก่อน +1

      😂😂 It'd cost 25 bucks to make just the retrieval pvc float. If i save one boat then its worth $the cost of the boat it saved. You might check walmart may have one in your price range.

    • @Robcadams1974
      @Robcadams1974 3 หลายเดือนก่อน +1

      ​@@MrMad2424 amen to that.