You did a great job, and the price was Right. 😊 if that's a Kohler engine, the valve cover with the PCV valve is usually the one that leaks. Just replace the rubber grommet and the leak should stop.
To YOU: Am 82 years young. Have spent a majority of my "thinking years" trying to salvage machines others have given up on. Am pleased to see your determination to do the same. Admiration~~!!!
Very nice for a free zero turn. I have never seen a mower with a kickstand. I have a John Deere S240. I had the same problem with the deck belt the first time I removed the deck. Since then I have taken photos, and I drew a belt routing diagram which I keep on the wall in my garage.
I was gifted a big Great Dane zero turn ,after over 500$ in parts I've got a pretty good mower to mow 5 acres. Cuts my time cutting it in over half took me many hours on a old ,1968 snapper rider.
you got a great mower for free....you even have the 200.00 add on "EZ-Stand"....worth a repowered engine anytime anywhere, even if you have to replace the hydro unit...the Zmaster 6000 is the machine! but that isn't the engine oil reservoir, thats the hydro oil reservoir! the oil to use as you said is correct but not for the engine....and you have to be in the seat with the parking break engaged to be able to start it...FYI I have a like new "Tri vac" bagger system for that very mower! its a 3000.00 option but will let it go for reasonable offer...the TurboForce deck is also the cats ass, this mower has been a favorite to lawn companies for years....
The front pivot points on the mower deck are real bad about freezing up. Best thing to do is apply some heat to them while you're trying to get the grease to go in and maybe use a air powered or electric powered grease gun that can develop some really high pressure. Once you get infried grease and very regularly because like I said they're really bad about getting dirty and freezing up. As for the belt, it's 12ft long, not hard to string but expensive ($88 on line, $150 from dealer). Bad design, rock the deck front to rear to much and belt comes off. Also check the pivot points on the deck mounting strut arms. They are greasable but if worn to much will also allow the deck to rock front to rear to much
You lucked out! Zero turns that size usually run at least 3k. I suggest you opt to modify the muffler, almost all the mowers with efi have major restrictions in the muffler that start showing up after about 200hours or so of use. Just bust the media out the pipe with a piece of rebar and dump it out if nothing else, you can also quiet it down a lot by adding some muffler wrap, and it wouldn't be a bad idea to weld on a bit longer tube to get the hot exhaust a little further out the back and away from the engine. (Even on small engines it will improve performance (very slightly) and increase engine life the more you improve cooling and airflow.) Overall, you got yourself a great mower regardless so treat it well!
I know you said both sides of the exhaust is hot, but it only exits out the right side , so it’s gonna be hot on both sides of the left cylinder if firing. Up until the very end of the video it sounded weak. Like one cylinder is not firing. Fire it up and let it idle, pull a plug wire off and see if it dies. I think it’s still got little miss to it. Heck of score though! I’ll trade you my Great Dane Chariot! Haha
Yeah, I had only ran it a few seconds and they were both hot, will do more testing and tuning soon. thanks for watching and I am not sure what a Great Dane Chariot is, but I can imagine.
Got myself a troybilt mustang xp 50" last week for $50. Got it all squared away last night. Would just like to get one more tire for it. Really happy with it.
That was a great find. Has a kawi motor on it I think you can fix that drift when it's in "park/neutral" position with a hydro linkage adjustment . (I'm sure you have figured that out you always do )
Hey chud great find man thats awesome!! I just recently aquired a john deere 201z with 109 hrs on it! Freeeeeee!!!! Needed a battery and clean the carb. Needs a deck pulley and a belt. Its to nice to hack on so im selling it. I would love to see you convert a z turn into a rubber track unit. In one of your older videos i saw where your friend turned a bobcat z turn into a tank with some old tractor tire treads, Running over palm meadows and bushes. There aren't a ton of videos online about it. Now who wouldn't wanna see a tank added to the collection?! Im still on a mission to build my own
Totally jelly! I've wanted to find a decent running one of those I can take the blades off of and have a redneck mobility scooter to get back and forth to the store and whatnot
@@chud327 the motor sounds like it's struggling though, even at idle. Sounds a bit lean. Douche the carb with carb cleaner and sea foam the shit outta it
Made in Japan, 😞 Keep it or Flip It?? But Very Nice I know someone who had a similar machine and the deck belt is definitely the worst design, being a single belt.
The Chevy wheels were 5x5 lug pattern and so was the trailer. I was happy when I discovered that they would fit. The wheels and tires went from being useless to a perfect fit. Thanks for watching.
nice score ..no offense ut i wlways think its funny when giys say "lets see if the tires hold air?" and all are flat.. hope he didnt drain it so you ran it empty😮
You did a great job, and the price was Right. 😊 if that's a Kohler engine, the valve cover with the PCV valve is usually the one that leaks. Just replace the rubber grommet and the leak should stop.
Good tip and thanks for watching!!
To YOU: Am 82 years young. Have spent a majority of my "thinking years" trying to salvage machines others have given up on. Am pleased to see your determination to do the same. Admiration~~!!!
Thanks so much and thanks for watching!!
Great mower! Performs exactly as expected.
It was a beast, thanks for watching.
Nice score on that mower.
@@tomtruesdale6901 thanks and thanks for watching!!!
That jack is probably the best investment any landscape company can make if their always hitting stumps.
I was impressed with it and have never seen one before. Thanks for watching!!
Great find! That machine will serve you well! Good luck with it!
Always enjoy your videos, didn’t know about the Jack built in, pretty cool
@@MurphyMower I was glad to figure that out, very cool and thanks for watching!!
Very nice for a free zero turn. I have never seen a mower with a kickstand. I have a John Deere S240. I had the same problem with the deck belt the first time I removed the deck. Since then I have taken photos, and I drew a belt routing diagram which I keep on the wall in my garage.
That kickstand is brilliant. A belt diagram is a great idea... Thanks for watching.
still here, still love the content. about to get my first mower :D
Man I wish I could find a free mower like that
I know... these folks must have manna just pouring down from heaven onto them.
Good for you, one man Junk is another man’s treasure! you ended up with a great commercial zero turn MOW ER
I was gifted a big Great Dane zero turn ,after over 500$ in parts I've got a pretty good mower to mow 5 acres. Cuts my time cutting it in over half took me many hours on a old ,1968 snapper rider.
Funny, my first zero turn was smaller than my rider, but cut the time in half... Thanks for watching!!
Great score Sir! You are a lucky guy, & by luck, I mean Preparedness meeting Opportunity & Carpe Diem!
@@PaulThomas-qo9vy love the comment and thanks for watching!!
you got a great mower for free....you even have the 200.00 add on "EZ-Stand"....worth a repowered engine anytime anywhere, even if you have to replace the hydro unit...the Zmaster 6000 is the machine! but that isn't the engine oil reservoir, thats the hydro oil reservoir! the oil to use as you said is correct but not for the engine....and you have to be in the seat with the parking break engaged to be able to start it...FYI I have a like new "Tri vac" bagger system for that very mower! its a 3000.00 option but will let it go for reasonable offer...the TurboForce deck is also the cats ass, this mower has been a favorite to lawn companies for years....
Man I'd love to find something like that 👍
@@SuperNoticer ikr, I would like to find more like that, thanks for watching!!
DAMN MAN nice score!!!! that is a great haul.
The front pivot points on the mower deck are real bad about freezing up. Best thing to do is apply some heat to them while you're trying to get the grease to go in and maybe use a air powered or electric powered grease gun that can develop some really high pressure. Once you get infried grease and very regularly because like I said they're really bad about getting dirty and freezing up. As for the belt, it's 12ft long, not hard to string but expensive ($88 on line, $150 from dealer). Bad design, rock the deck front to rear to much and belt comes off. Also check the pivot points on the deck mounting strut arms. They are greasable but if worn to much will also allow the deck to rock front to rear to much
I got a free zero turn with a 25hp Kolher and a 50 inch deck
Very nice!! I love free and I love zero turns!! Win win!! Thanks for watching!!
You lucked out! Zero turns that size usually run at least 3k. I suggest you opt to modify the muffler, almost all the mowers with efi have major restrictions in the muffler that start showing up after about 200hours or so of use. Just bust the media out the pipe with a piece of rebar and dump it out if nothing else, you can also quiet it down a lot by adding some muffler wrap, and it wouldn't be a bad idea to weld on a bit longer tube to get the hot exhaust a little further out the back and away from the engine. (Even on small engines it will improve performance (very slightly) and increase engine life the more you improve cooling and airflow.) Overall, you got yourself a great mower regardless so treat it well!
Great tips and thanks for watching.
Thanks for the video Chad!
I know you said both sides of the exhaust is hot, but it only exits out the right side , so it’s gonna be hot on both sides of the left cylinder if firing. Up until the very end of the video it sounded weak. Like one cylinder is not firing. Fire it up and let it idle, pull a plug wire off and see if it dies. I think it’s still got little miss to it. Heck of score though! I’ll trade you my Great Dane Chariot! Haha
Yeah, I had only ran it a few seconds and they were both hot, will do more testing and tuning soon. thanks for watching and I am not sure what a Great Dane Chariot is, but I can imagine.
Got myself a troybilt mustang xp 50" last week for $50. Got it all squared away last night. Would just like to get one more tire for it. Really happy with it.
Very cool and good price too. thanks for watching.
Just the scrap value. Must have been a friend.
I had just met him, sold him a boat, fixed his other mower and he gave it to me. Super nice guy and thank for watching.
That was a great find. Has a kawi motor on it I think you can fix that drift when it's in "park/neutral" position with a hydro linkage adjustment . (I'm sure you have figured that out you always do )
A Kawi would have been a great improvement, however sold it to buy more stuff for the channel. Thanks for watching.
Cool mower
Amazing the things some people will give away. Even the scrap metal value is a decent amount. Comparable machines cost $10k or more
Hey chud great find man thats awesome!! I just recently aquired a john deere 201z with 109 hrs on it! Freeeeeee!!!! Needed a battery and clean the carb. Needs a deck pulley and a belt. Its to nice to hack on so im selling it. I would love to see you convert a z turn into a rubber track unit. In one of your older videos i saw where your friend turned a bobcat z turn into a tank with some old tractor tire treads, Running over palm meadows and bushes. There aren't a ton of videos online about it. Now who wouldn't wanna see a tank added to the collection?! Im still on a mission to build my own
I have been looking for tractor tires, you read my mind... thanks for watching.
I wish my new ariens apex 52 had that jack. super smart
That jack was very cool!! Thanks for watching!
You got to be the luckiest man on earth
I love your machine it's a lovely colour I wonder if it will run cause I'm watching your video right now
Hope you made it to the end, it ran pretty great. thanks for watching.
Doggy ♥️♥️♥️♥️♥️, treats and tummy rubs.
Thanks and thanks for watching.
Wow 😳 that is great 👍.
I need more of that. ... Thanks for watching!!
If you replace the belt get a kevlar belt, the more expensive but mine lasts almost 600 hours
The clog in the oil dipstick tube was a mud daubers nest made from dirt or mud.
Possibly, but seemed solid and harder than usual. I know they love my air tool chucks… thanks for watching!!
Loved the video man
@@Lynn-ww7lh thanks so much and thanks for watching!!
Man I like this stuff!
@@bigsonslawncare thanks so much and thanks for watching!!
The famous crop circle but in grass
Funny and thanks again for watching
A few new parts and you will have a nice Zero turn.
yep, exactly what I was thinking, thanks for watching.
Totally jelly! I've wanted to find a decent running one of those I can take the blades off of and have a redneck mobility scooter to get back and forth to the store and whatnot
That would be cool, thanks for watching.
Thats awesome!!
IKR, need more deals like that. Thanks for watching!!
you a new zero turn
Yep and thank you for watching
Nice I wish I had it❤️
Score!
Lucky you,I’m jealous
U are a lucky guy.
Thanks so much and thanks for watching!!
That idle need to be all the way up for the blades to be on
Thanks for watching
needs concrete tires and a full tune up because it sounds like its struggling in the grass
Concrete tires might get more views and thanks for watching.
@@chud327 np tanks for the great content
Now you have three zero turn mowers
Yep, thinking of selling one for my project money...
Short oil filter can bottom out the oil filter nipple and shut off oil flow
I better be careful about that and thanks for watching.
Grease those spindles!!!!!
Thanks and did, thanks for watching!
@@chud327 the motor sounds like it's struggling though, even at idle. Sounds a bit lean. Douche the carb with carb cleaner and sea foam the shit outta it
Awesome👍
@@kevinbreaker2683 thanks so much and thanks for watching!!
Bummer that you didn't replace the exhaust
Put that on the list of future fixes. thanks for watching.
This mower sounds like it is only running on one cylinder. I know you checked but while loaded it sounded like only one cylinder was pulling.
I like that zero tern mower do want to sell it
Sorry, but I already sold it..., thanks for watching
I would like to come across a deal like that
Yeah, I would do that every day, if I could. thanks for watching.
You got lucky with that one!!!
I just got a Husqvarna 24 horse power with a 48 inch deck I put new plugs and a air filter and a new battery and it looks and runs like a new mower
Zero turn mud mower
I wish a have ondd we free like the one you get
I would like to find another one too. thanks for watching.
Probably a mud dobber got in that dip stick tube
Very likely in my area, happens all the time! Thanks for watching
Sounds like its only running on one cylinder.
I thought the same thing, but I think that was the rusted out muffler making it sound that way. Thanks for watching
I'm guessing 08-09 25hp kohler
That sounds about right and thanks for watching!
Made in Japan, 😞
Keep it or Flip It??
But Very Nice
I know someone who had a similar machine and the deck belt is definitely the worst design, being a single belt.
@@redneckbryon thanks for watching
Oh no, dont top off that hydro fluid. Should have room to go up and down as you use the hydros.
Thanks for the tip and thanks for watching!!
That is a 8000.00 dollar mower.
I know right, but I didn't know it was that much. I was very shocked when he said "you can have it..." Thanks for watching!!
How did you get your phone that high when mowing lol
Drone did it, phone stayed low. thanks for watching.
Why cant i find free stuff like that that needs minimal work?
What is the best mower for a mud mower
Anything with a manual transmission
Thanks i have 3 mowers and had to pick one to be a mud mower and im only 14 so thanks for the help
How do you manage to get these things for free
@@Steve69419 idk, but would like to figure it out and repeat a few more times. Thanks for watching
Astuin 1013
Thanks for watching
I would like to find a free zero turn mower.
Yes, I was shocked!! I keep looking for more. Thanks for watching!!
it deard zero turn mower too fix
Thanks for watching
Idk if u rember me but heyyyy
The name sounds familiar, did you have a different first name? Jonathan maybe? thanks for watching.
Turned out not to be a turd
I was impressed how easy it was to get running. Thanks for watching!!
How are you getting this stuff for free. It would be at least a grand not running online
@@denttech2515 right place / right time, I need more places and times to align like that. Thanks for watching!!
Engine definitely sounds like valve train issues and low on power. My Kawasaki engine would act like this with a bent push rod.
That could have been it. I actually sold it and thanks for watching!!
How’d you get those Chevy wheels on the trailer?
The Chevy wheels were 5x5 lug pattern and so was the trailer. I was happy when I discovered that they would fit. The wheels and tires went from being useless to a perfect fit. Thanks for watching.
@@chud327oh I remember one of my old trailers had ford wheels on it and they were a direct fit also
Something is off on this mower. It sounds horrible.
Yeah it stopped running after a while, but still sold for $900. Thanks for watching!!
nice score ..no offense ut i wlways think its funny when giys say "lets see if the tires hold air?" and all are flat.. hope he didnt drain it so you ran it empty😮
I figured it leaked, but hopefully a slow leak, thanks for watching
Hand held cans sucks
Thanks for watching!!
Mower not good at all 👎
IKR, It started right up and cut grass, that is no good at all... Thanks for watching that junk