Se necesita usar el control para encenderlo? O tiene un modo que cuando uses el apagador de pared encienda la luz y el ventilador siempre, sin tocar el control? Disculpa la solicitud pero podrías intentar? Muchas gracias!
This one does not. I just did a video last week on another socket fan that does have a remote holder. Be sure to check it out. It's a little smaller but moves just as much air.
You can actually control it by flipping the switch without remote. 1st on= light, flipping off then on 2nd time give you fan , flipping off on 3rd time gives you light plus fan. Just flip the switch quickly. On off on off on off. It you can’t control the light temp without remote though
@@skinners100honestreviews3 I have three in my house 2 diff brand. All work the same. Sucks that I can’t save the light color and need remote to change it but other than that I haven’t really needed the remote.
Thank you. I have 3 of them. We used the extension and it seems one of the blades came out why removing the unit it seemed to have broke the extension rod. Would you know who I could reach out to find this piece. Thank you
@@skinners100honestreviews3 I don’t think it was with Amazon I asked my wife to check and she said no. Not with Amazon. I was wondering if you knew of a place that sells the little extension
@@That_inflatable_guy123 mine is in the garage connected to our switch so, any time i flip the switch the fan is on... not for too long though. I have noticed "noise" as well. But I wonder if mine is just from dirt/dust from the garage
If it's even possible... I would use a small screwdriver to bend the tabs and pull the blades out. I've never tried it but I would think you're going to break them to get them out.
@@skinners100honestreviews3 hi, a few minutes after I asked my question, I decided to pull up on the tab while at the same time pulling the blade out. It worked, however it was very difficult. But at least now I am able to return it to Walmart. I was not happy with the ‘wobbling effect’!
UL is not stamped on the fixture like most products and I no longer have the box to check so I do not have a definte answer for you as there is no information stating that on the product page either.
With mine that I ordered, the light is hanging off. The wire is the only thing that’s holding the bulb in place. I don’t know what to do. I’m thinking of returning it. Anyone have any advice
I have this exact fan myself and run it of a pendant cable (wire) I read the comments (on the seller's site) of some who bought it. if the cable is too thin it will obviously twist the cable more. the twist is because the motor has to have some resistance to turn. The seller suggested either a different socket or one with a metal rod drop fitting rather than cable. I have a reasonably thick cable on my light fitting and it starts up ok with a perhaps 1/8th twist/turn in the cable when it is running. I'll monitor it. I might get a non cable fitting sometime but for now it is ok. if the cable comes loose for some reason it will trip the breaker and you will know why LOL
I have the full grade clockwise version from bell and Howell I think but I’ve been asking around cause I got it today. I tried it with the two blades and it was surprisingly powerful in choir than with the floor blades. I thought it was gonna perform like it would with blades so I wanna go back to two blades where it’s more streamline a little more powerful and less dusty so that being said, how do I take the blades off? It’s just the original two I had on it because I put them on there and then putting the blades on there put them on there on the way to where it would click, but I don’t know how to take them off. I don’t want to break it
I think that's going to be a challenge. I would try a small flat head screwdriver and try to lightly pry the blade from the clip. Just take it easy, it's plastic you're working with
@@skinners100honestreviews3 thanks, I got it. If I ever want the 4 blade back I thnk I’d just just this and just get another and put 4 blades on it but yeah, definitely keeping ths a 2/two and don’t wanna get the urge to have 4/four blades hence why I’d get another in the future and put all the blades on it. If I were too but yeah I’d recommend it not with 4 but 2/two now I realize why some AC units but mainly why some airplanes and helicopters have two blades. It’s more powerful only if they adopt this blade design into flying aircraft flight airplanes and helicopters and stuff like that it could be way more powerful planes can go away faster than the airplanes that are deep pitched, racing planes or pitched propellers on racing planes and maybe even be more fuel efficient too but thanks
@@skinners100honestreviews3 yep. It honestly thgh sounds lke those ww2 twin engine 3/three blade props when they idle and a 20” Lakewood p23 on low. Well it sounds lke mine anyways but thts when on high lke it is now
You can actually control it by flipping the switch. 1st on= light, flipping off then on 2nd time give you fan , flipping off on 3rd time gives you light plus fan. Just flip the switch quickly. On off on off on off.
I’m going to install one in the chicken run. Thank you for the review.
That is a great idea!
Se necesita usar el control para encenderlo? O tiene un modo que cuando uses el apagador de pared encienda la luz y el ventilador siempre, sin tocar el control? Disculpa la solicitud pero podrías intentar? Muchas gracias!
Thanks!
Tengo exactamente la misma duda
Does it come with a thing to hang the remote on the wall with
This one does not.
I just did a video last week on another socket fan that does have a remote holder.
Be sure to check it out. It's a little smaller but moves just as much air.
Do you press the little black button on the fan?
It's a sensor remote control the black bottom on the fan funtion on off speed time ligts dimmer
@@capitanjack1973I’m sorry what is the black button?
Mine makes a beep noise, and the fan is not working, but the light does, do you know if it can be fixed?
You can actually control it by flipping the switch without remote. 1st on= light, flipping off then on 2nd time give you fan , flipping off on 3rd time gives you light plus fan. Just flip the switch quickly. On off on off on off. It you can’t control the light temp without remote though
I'm not sure it's supposed to work that way lol
I've not tried it but it seems like a wiring issue to me
@@skinners100honestreviews3 I have three in my house 2 diff brand. All work the same. Sucks that I can’t save the light color and need remote to change it but other than that I haven’t really needed the remote.
@@zezozezon8291I have one shaped like a wheel with a ring bulb and the fan in the middle. It does not have a remote and it works like you mentioned.
Thank you. I have 3 of them. We used the extension and it seems one of the blades came out why removing the unit it seemed to have broke the extension rod.
Would you know who I could reach out to find this piece.
Thank you
If you purchased through Amazon you can do a return within 30days
@@skinners100honestreviews3 I don’t think it was with Amazon I asked my wife to check and she said no. Not with Amazon. I was wondering if you knew of a place that sells the little extension
@@johnhouli3450 if you search "light bulb extension" on Amazon you'll get several different variations for under $10
How long does this fan last?
I installed this fan/light on Jan 5 and it runs every day... Still going today, Feb 16
Mine sometimes makes noises idk why :( and how long do you run it?
@@That_inflatable_guy123 mine is in the garage connected to our switch so, any time i flip the switch the fan is on... not for too long though.
I have noticed "noise" as well. But I wonder if mine is just from dirt/dust from the garage
@@skinners100honestreviews3thanks I have it in my room so sometimes I turn it on for 1 to 2 hours
Is it heavy? How much it weights? Thanks
Very light weight... Maybe 2lb
How do you remove the blades in order to return to the store? I have tried and tried; please help.
If it's even possible... I would use a small screwdriver to bend the tabs and pull the blades out. I've never tried it but I would think you're going to break them to get them out.
@@skinners100honestreviews3 hi, a few minutes after I asked my question, I decided to pull up on the tab while at the same time pulling the blade out. It worked, however it was very difficult. But at least now I am able to return it to Walmart. I was not happy with the ‘wobbling effect’!
thank you for your response, Skinners!
@@janistezak6299 you're welcome!👍
thanks for the review, is there a reverse mode for the winter ?
Not that I know of
there is a black piece that looks like a button coming down from the fan motor. do you know what that is for?
Sensor for the remote control
I was wondering if you could change the light when it light blows.
That is a great question... No, the light is not replaceable
Is this ul listed?
UL is not stamped on the fixture like most products and I no longer have the box to check so I do not have a definte answer for you as there is no information stating that on the product page either.
Po instalacji obraca się wraz z lampą. Jak poradzić sobie z siłą od środkową wentylatora?
With mine that I ordered, the light is hanging off. The wire is the only thing that’s holding the bulb in place. I don’t know what to do. I’m thinking of returning it.
Anyone have any advice
I would definitely return it
I have this exact fan myself and run it of a pendant cable (wire) I read the comments (on the seller's site) of some who bought it. if the cable is too thin it will obviously twist the cable more. the twist is because the motor has to have some resistance to turn. The seller suggested either a different socket or one with a metal rod drop fitting rather than cable. I have a reasonably thick cable on my light fitting and it starts up ok with a perhaps 1/8th twist/turn in the cable when it is running. I'll monitor it. I might get a non cable fitting sometime but for now it is ok. if the cable comes loose for some reason it will trip the breaker and you will know why LOL
@@whatworkedforme Thanks for sharing! Very helpful
What is the black button on the top of the unit?
I'm not sure what button you are referring to
What’s the black button do I pressed it in and it won’t come back out should I be worried
Thats the receiver for the remote, one of mine came with it bashed in.
Any one have any issues with the remote not working. Ive changed the battery in it but still not working.
I have the full grade clockwise version from bell and Howell I think but I’ve been asking around cause I got it today. I tried it with the two blades and it was surprisingly powerful in choir than with the floor blades. I thought it was gonna perform like it would with blades so I wanna go back to two blades where it’s more streamline a little more powerful and less dusty so that being said, how do I take the blades off? It’s just the original two I had on it because I put them on there and then putting the blades on there put them on there on the way to where it would click, but I don’t know how to take them off. I don’t want to break it
I think that's going to be a challenge. I would try a small flat head screwdriver and try to lightly pry the blade from the clip. Just take it easy, it's plastic you're working with
@@skinners100honestreviews3 thanks, I got it. If I ever want the 4 blade back I thnk I’d just just this and just get another and put 4 blades on it but yeah, definitely keeping ths a 2/two and don’t wanna get the urge to have 4/four blades hence why I’d get another in the future and put all the blades on it. If I were too but yeah I’d recommend it not with 4 but 2/two now I realize why some AC units but mainly why some airplanes and helicopters have two blades. It’s more powerful only if they adopt this blade design into flying aircraft flight airplanes and helicopters and stuff like that it could be way more powerful planes can go away faster than the airplanes that are deep pitched, racing planes or pitched propellers on racing planes and maybe even be more fuel efficient too but thanks
@@skinners100honestreviews3 yeah meaning it’s break easy right or like you mead it won’t corporate
My light is on a cable and whenever I turn the fan on it seems to coil and twist the cable, is that dangerous and should I stop using it?
I would think that anytime you kink a wire you run the risk of danger... Id probably look for another location to use the fan
is it noisy?
It did start making noise a few months later ... I've posted a new fan video that seems to be a bit more stable
How do you remove the fan blades for cleaning, or returning product
I'm not sure you can remove the blades
Ventilação desse é boa?
Yes, the fan put out a good bit of air circulation
Obrigado
I bought but doesn't working, also the remote is not the same in this video
If it is not working correctly hopefully you can return it
How donu switch it from counter clockwise to clockwise?
I don't think this fan has that option
why?.. you want it to suck up the air?
Got one of these off eBay, very decent for the price but the fixing it came with (I’m in the uk) was very poor and broke easily.
Well that's a bummer
Full grade clockwise was a typo. I think I meant four blade
Gotcha 👍
@@skinners100honestreviews3 yep. It honestly thgh sounds lke those ww2 twin engine 3/three blade props when they idle and a 20” Lakewood p23 on low. Well it sounds lke mine anyways but thts when on high lke it is now
@@skinners100honestreviews3 and on medium it’s spinning to scale of a dominion copter
@@skinners100honestreviews3 robinson
Thanks, friend!
You're welcome
Mine doesn't work. The remote doesn't turn it on
Well that's a bummer... Are you sure the light switch is on? That's the only way the remote will work
I have this problem too.How do I know if the light switch is on? @@skinners100honestreviews3
It doesn't work well. When it stops it fails to come back on. Not a good buy at all
I'm still using mine.
Buy 10! On codes or whatever... To cheap to repair anyway
@@Stereoempathy if you're buying 10 make sure you use the link in the description 😂😂😂
You can actually control it by flipping the switch. 1st on= light, flipping off then on 2nd time give you fan , flipping off on 3rd time gives you light plus fan. Just flip the switch quickly. On off on off on off.
Allah sana hidayet etsin thank you
your welcome
@@skinners100honestreviews3 bought the same product. It looks like a good product. Greetings from Turkey."