Troubleshooting - Harman Kardon GO+PLAY don't work - repair and rework
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2020
- Troubleshooting - Harman Kardon GO+PLAY don't work - repair and rework
============================================================
- With portable Bluetooth (BT) speakers, the battery is an extremely important factor. It does not affect the sound quality but it greatly affects our experience.
- When the battery is low, some speakers sound smaller than normal and can not be loud to the road despite having a direct power plug. For example, portable speakers from B&O, Sony, Denon, ... This is not an error, but the manufacturer intended to do so to protect the battery of the speaker.
- And about the battery problem, broken battery of the speaker. The phenomenon that you only use a while is the power down or push the power button or plug the power directly without going up, most of which is due to the battery failure.
- Thank you for watching the video, please subscribe to the channel to update the latest videos by the link : goo.gl/SA9G6x - วิทยาศาสตร์และเทคโนโลยี
Useful video thank you. 👍
hi thanks for the video. where did you buy your new battery?
BINGOOOOOO! Yes Yes Yes!!! Wielkie Dziękiiii!
Useful video thank you. My go+play charges ok but the battery doesn't last long because I used it always on AC. We shoud put a switch to disconnect the battery when using it only on AC because clearly Harman kardon didn't think of the "always under charge" problem. It's not okay to have it always at 100%
Absolutely agree , but this is the best option for HK to make customers buy a new device. I wrote an email which is the best way to extend to battery life since I use it most of the time on a daily bases at home. the answered, „keep at AC at all times“
@@De123Martini456 lol
Can you remove the battery completely and run it with the ac power adapter only?
Possible to replace with JBL extreme battery 5000 Mah?
I bought new batteries and replaced it with a new one. After that upon connecting ac power, it is just blinking 1 LED. Then, when I remove the power, the whole speaker shuts down too. Do I need to power the new batteries before I connect it or is there a different problem that I am encountering?
Hi my hk onyx 3 sount problem when I play songs sound not coming what is the problem please tell me
Hi mate, kindly advice how I can unpair all paired devices to my HK go play.
reset it
Perfect
By your method we need to replace the battery or not ??
Because my speaker doest work without charger
Your battery has been damaged - you should replace it
Can we bypass the battery? So the speaker only powered by AC to DC adapter
you tried?
jbl 3 battery compatible 6000mah? its ok to replace in hk go play?
can replace - thankyou
My Hk b Onyx Studio Speaker won't turn on. It was working fine 2 days ago. Is it the battery or charger?
DIDN'T ADD THAT THE SPEAKER THAT WONT POWER UP IS A STUDIO 7.
I tried the same thing. No voltage from battery. Zapped the battery with 9V for 2-3 second and its now showing around 8 volts. Thanks for your video
Congratulation
Hi trying to charging for revive harman kardon go play. Need details about a missing component on motherboard. Can you help if I send u pic
You can email for me : xuantho1702@gmail.com
I changed the battery on my HK Go Play to the same spec battery. Tested battery voltage before installing it. Now the charge light comes on when you plug in the AC adapter to show it’s charging but it doesn’t ever go past the first blinking light. The speaker also refuses to run off battery power. When you switch off AC adapter it dies. Tried a second battery and same thing. Any suggestions?
After further troubleshooting it is clear that the battery is not powering the board. I test the voltage on the battery and it’s fine but when connected to the board there is no voltage. Must be a fault on the board.
@@wozzco8111 you repaired it yet?
I had a similar problem, even connected to the plug no light indicator, I decided to disassemble it and check the battery, it wasn't show any voltage so I decide to charge it with a 5v wall charger and then it suddenly turned on but a blinking red light appeared, and even if it's connected to the original charger it doesn't charge, the speaker works a short period of time and then turns off, the Bluetooth connection works well, I don't know if waste money in a new battery of the problem maybe is somewhere else. OS5
so what did you do?
Link for new batery please.
I wanted to get to the speakers but I could not remove the base cover. It must be held by some other hidden screws. unless it's glued.
You should take care to remove all the screws because the speaker is not glued
where do i buy a new battery
Hi first of all thanks a lot for the videos !
I got the following problem. The speaker works totally fine on dc. But in the moment i plug out the cable the speaker turns off. I changed the battery today and still got the problem. U have a hint?
Thanks in advance. I really enjoy ur content. Stay healthy 🙏
did yiu find out?
@@johnmachter40 sorry to disappoint, I haven't found a way to fix it.
did u fix the problem?
I do have the same problem, did you found a fix?
Sorry guys, I wish I could help. But till now, I haven't found a way to fix it.
Hi, I have a problem with onyx studio3, it only turns on under the charger, it does not turn on on the battery, the battery has changed to a new one, what could be the reason for this?
You check capacitor C5 - U2 to see if it is short - replace it
you can watch my latest video
did it work?
at which voltage speaker (or bms) shuts down? if its made for lipo battery, it should cut off around 3.5v per cell, when it shows one red light blinking.
now when i put li-lion battery, will it still shut down at 3.5v? because that is only at half capacity of li-lion... it should go down to 2.8-3.0v... so wasted capacity if li-lion is used, and shut down at 3.5v
have you figured it out?
@@johnmachter40 nope :(
Bms shuts down at 7.2V, so 3.6V per cell
@@Bxin718 then no point in using li-ion batteries, thats only half of their capacity used :(
Hi where dies that last wire connect to please
you found out?
OK, but please, an informative narration about what exactly you're doing would be more helpful than a music track.
Thank you for your comments, I will improve future videos
exactly
@@bulunayak8449 is a n;;;km km g cf uu
Perharps dontspeak Inglish✓
It looks like you zapped the battery with 8 volts. I don't have a variable power supply. Can I use a 12V battery to momentarily zap it? Thank you for the video
You can do that
0,5 seconds is enough . Thankyou
Hi ! I have problem my go play. Problem is my go play is working well but bass is not really working it was before I feel bass and eneugh clear. Now not like before I checked woofer is seems good condition. How should I fix this problem. Thanks
error IC U11 - PCM5121 (Audio D / A Converter ICs) you can replace it
@@repairandrework thank you very much
@@fatih2284 did it work?
Thanx for the video…it is like silene cinema. You may write on video pages in English.
What about if we use 2 Lit-Ion 18650(Samsung)…2 x 4.20V= 8.40V…Maybe we use another adaptor(9V)…
If you make comment about my idea, I’ll be glad…
did you try some of yiur ideas?
Your video is very useful, I am upgrading my battery too, got two nitecore batteries, my question is that is it necessary to include the small module which comes with the original batteries, what's its function anyway?? reply plz
so how did your upgrade go?
is the battery for jbl charge 3 compatible with HK go play?
Is compatible
@@repairandrework its same same size the battery?
Hi. İ have a question. My hk when i plug to charging battery not full after 3 or 4 hr later. İ have new battery same problem 3 light showing full after that instead of full start again 1 light trying to charging again
you figured out the problem?
No
I have the same problem. I replaced the battery and it was fine for a bit, but the battery won't charge. Eventually the new battery died too and I could not power on unless I jump the battery like in the video. After checking the schematic and from what another user said, I was able to find voltage going to the source on U32, but no voltage on the drain. Also no voltage on L20. Can I safely assume the issue is with U32?
@@Yeugiadinh I saw that comment but I wasn't sure what ugs was. I also wasn't able to see any continual draining from U32 from the battery. I pulled U32 off the board and I'm getting 0V on the drain when testing as diode, no matter if the mosfet is on/off (I don't think it switches on). I'm pretty sure U32 is also my problem, ordered a replacement and hoping I will have a working speaker soon :)
@@wackmnm hi Wackmnm did you manage to get it work, what is the mosfet part number?
@@cbudiono sadly no, I must have tested wrong, I replaced it but the problem is still there. I tried to troubleshoot more but I don't know enough, couldn't find the issue. Part number me4894 if it helps
@@wackmnm thanks
@@wackmnm did you manage to repair it yet one year later?
Hi, thanks for the video. Changed the battery to a new one, but I observed, that the battery is drained by the unit while switched Off. Any idea for the potential reason? I assume, this behaviour killed the original battery...
Your judgment is right, your speakers have current in their sleep mode - you must have universal power to find the cause
@@repairandrework Lab Power supply is available here, but No shematic unfortunately.
@@friedelz.2167 schematic here :servlib.com/harman-kardon/audio/go-play-wireless-sm7.html?start=16
@@paulmccartman Thanks for this very helpful link. With the schematic, I was able to identify the evil guy. FET U32 was continuously draining around 150mA from the battery. With Ugs of 0V. No wonder, the battery was killed... New FET, new battery.. back to life.
@@friedelz.2167 I think I have the same issue, how do you test the mosfet?
What model and brand of battery is it?
Go on aliexpress
cs-hkp100sl
can we use 2X 2 cell 7,4v to get 12000Mah ?
1 cell = 3000ah -> 12/3 = 4 cell 3,7v , 7,4v = 8cell = 12000Mah
@@repairandrework is it ok to do that ? keep the voltage 7.4 but increase the Ah? does it damage the board or something ?
@@AliAseman no it doesnt damage anything. did yiu try?
You didn't change the battery right? You resetted it or what?
You should only replace the battery when the battery is bottle, the battery cells are sleeping, follow the above method. thank you
He jump started the battery to revive it.
Maybe easier to reset it from outside: pt.ifixit.com/Answers/View/258747/Go+++Wireless+Not+Powering+On
@@tronque works greatt, pressing 5 buttons at once, and voila... Thx alot man.
@@tronque it worked! Thanks so much 👍
3s or 4s lipo batt?
2S - 2 cell 7,4v - 3000Mah
Can i use 45c 5400 mah 7.4v battery?
@@Deectator you tried yet?
@@johnmachter40 not yet
Harmankardon and jbl are the same alway has battery problem my jbl extreme after 8 months use the battery is totally die
After I perform reset by long pressing power + volume up button my speaker basically died and it's not even turning on now. My Can someone please help me? :(
You do the same again
For some reason the HK will stay dead. No combination of button pressing will wake it (well thats what happened for me). My U32 mosfet charger was totally shorted out, removed the offending chip and it started up ok. I'm just about to re solder a new one in to see if it works ok.
@@MrMarkieg hi Mark did you managed to get it fixed? Wheres Mosfet U32 on the schematic?
@@cbudiono Yes it worked very well, runs like new again. The U32 is about middle of the board, the numbers are marked on the board. You will need a decent hot air blower to remove and resolder though.
Mark Gulliver why did it get damaged?
go play 7.2 volt çok düşük 19 volt baterry lazim sarj adaptörüde 19 volt
wrong
How to fix the distorted bass sir,tnx!!
The reason is usually due to the screws that catch the bass speaker being loose, leading to broken bass
Say Something!