I have the h/k go play wireless and it’s working perfectly.I didn’t buy it new.Why do these speakers rott only after 7 years.This model was made in 2011.
meistens funktioniert das kleben nicht. Der Lautsprecher wird trotzdem noch knacken. Das Gitter von der Box bekommt man mit einem Fön ab. Einfach aufheizen und dann mit den Spitzen einer Nagelschere seitlich aufhebeln. Ohne Fön geht es nicht und man muss das Gitter entfernen um an die Lautsprecher Schrauben zu kommen. Diese Schritte werden leider in keinem Video beschrieben.
Das kann ich so bestätigen. Das Bekleben mit einer neuen Sicke ist sehr mühsam und funktionierte in meinem Fall nicht, da der Lautsprecher danach immer noch knackt und Störgeräusche produziert.
For everyone asking how to remove the grill use a heat gun or hair dryer to heat the grill a little then put something that fit in the little holes of the grill and pull it will came out really easy with no damage
This doesnt work for me. I've been spending hours trying to get it off. I've tried to push it out from the inside through the broken foam with a screwdriver and i've tried plieing something between but it only damages the metal circle around it.
The speaker grills are held in by a thermal glue, like from a hot glue gun. Warm it up and it softens and the grills ome out pretty easily. I used a hook pick tool that fitted in the grill holes and pulled.
I know that this is an old video but still.... ....The Player is already disassembled. In the future if you do a how to video, please show the real process. This is not that simple or easy to do and viewers will most certainly damage their equipment if they decide to tackle this job. 1- There is one extra screw in the center of the battery compartment. 2-To remove the grill use a hair drier to soften the glue, but you still have to pry the grill out. For this use cellphone/computer plastic tools. If you use a screw driver you will damage the plastic ring around the grill. The damage will only be aesthetic. I warn you right now, it will not pop out like the one in the video. You will have to pry it slowly and steady. 3-Removing the old foam ring will not be that easy. He only shows a really tiny part of the time he probably used to remove it. Again, you will have to go slowly and steady. Use plastic tools if possible. Tweezers are must for this.
Hi there. Question, I want to buy and replace one partially blown speaker for this device (Harman-Kardon Go Play). Does this speaker works? www.ebay.com/itm/263856585502?ul_noapp=true. Thanks!
Could you tell me please, how did you remove the bottom lid. I still haven't been able to get it out. remove the 10 metal screws and the cover still does not come loose. It seems that something is screwed inside. And in your video it doesn't show well how you get it.
I have the h/k go play wireless and it’s working perfectly.I didn’t buy it new.Why do these speakers rott only after 7 years.This model was made in 2011.
meistens funktioniert das kleben nicht. Der Lautsprecher wird trotzdem noch knacken. Das Gitter von der Box bekommt man mit einem Fön ab. Einfach aufheizen und dann mit den Spitzen einer Nagelschere seitlich aufhebeln. Ohne Fön geht es nicht und man muss das Gitter entfernen um an die Lautsprecher Schrauben zu kommen. Diese Schritte werden leider in keinem Video beschrieben.
Vielen Dank, genau danach habe ich gesucht.
Das kann ich so bestätigen. Das Bekleben mit einer neuen Sicke ist sehr mühsam und funktionierte in meinem Fall nicht, da der Lautsprecher danach immer noch knackt und Störgeräusche produziert.
For everyone asking how to remove the grill use a heat gun or hair dryer to heat the grill a little then put something that fit in the little holes of the grill and pull it will came out really easy with no damage
This doesnt work for me. I've been spending hours trying to get it off. I've tried to push it out from the inside through the broken foam with a screwdriver and i've tried plieing something between but it only damages the metal circle around it.
This is the way
And to see it work:
th-cam.com/video/2llXNgLAEa4/w-d-xo.html
Good video... Question: how did you remove the speaker grill!?
The speaker grills are held in by a thermal glue, like from a hot glue gun. Warm it up and it softens and the grills ome out pretty easily. I used a hook pick tool that fitted in the grill holes and pulled.
Where do you bought the replacement foam?
I know that this is an old video but still....
....The Player is already disassembled. In the future if you do a how to video, please show the real process. This is not that simple or easy to do and viewers will most certainly damage their equipment if they decide to tackle this job.
1- There is one extra screw in the center of the battery compartment.
2-To remove the grill use a hair drier to soften the glue, but you still have to pry the grill out.
For this use cellphone/computer plastic tools. If you use a screw driver you will damage the plastic ring around the grill. The damage will only be aesthetic.
I warn you right now, it will not pop out like the one in the video. You will have to pry it slowly and steady.
3-Removing the old foam ring will not be that easy. He only shows a really tiny part of the time he probably used to remove it. Again, you will have to go slowly and steady. Use plastic tools if possible. Tweezers are must for this.
Hi! Could you please tell where have you found the replacement foam?
speakerrepairshop.nl/
Those are jbl atlas speakers, and they often foam rot!
Correct! My TH-cam pic tho :P
ciro589m yes👌👌
Have you ever seen a roten spider on these woofers?
The very reason why I don't choose jbl or harman kardon speakers anymore. Their surround foams just don't last long.
Hi there, i have the same problem as yours, do you know what size foam to get? inches? thanks
Where from u purchased this replacement cone please share site name or link
Hi there. Question, I want to buy and replace one partially blown speaker for this device (Harman-Kardon Go Play). Does this speaker works? www.ebay.com/itm/263856585502?ul_noapp=true. Thanks!
Where did you find replacement parts for this?
aliexpress...
Could you tell me please, how did you remove the bottom lid. I still haven't been able to get it out. remove the 10 metal screws and the cover still does not come loose. It seems that something is screwed inside. And in your video it doesn't show well how you get it.
May i know the diameter size of the new rubber?
is there any substitution driver replacement for that hk driver ?
Where do you bought the replacement foam?
I tried to refoam my speaker, but it still sounds bad with the replacement foam. Didn`t work for me.
Did you center the voice coil? If it scratches when you push it, then you have to do it again until it doesnt
What is that metal rolling tool you use to press the surround to the cone?
I think it is the big screw from the botton part of Go + Play
I use withe glue from school XD
Where do you bought the replacement foam?
Ebay. Google them with spk model
?
?
on me my opinion WORST QUALITY