How to solve a Gear Cube
ฝัง
- เผยแพร่เมื่อ 3 มิ.ย. 2024
- Here is my Gear Cube Tutorial.
Gear Cube from Amazon: bit.ly/GearCubeBlack
I came up with this method completely on my own. It can be solved very quickly. My best times out of 15 solves were 11.11 and 12.35.
A note on notation. For a U hold the bottom layer still and move the top layer clockwise 180 degrees. For an R hold the left layer still and move right layer clockwise 180 degrees For an R2, hold the left layer still and move the right layer 360 degrees. My instagram: / red.kb
Here's the gear I'm using:
bit.ly/RedKB-Gear - วิทยาศาสตร์และเทคโนโลยี
I never expected it to be THAT easy!
XD
Sane
Same here!
Ikr
Am I the only one that watches tutorials about cubes I don't have?
Nope 😃
Lol
+Zack Laviolette lol nope
+Zack Laviolette no i do all the time to see if i want it
No, I do it too.
Love how you review the steps and put them on the screen, it makes it very easy to know what you're doing. Very effective communication.
i agree
In Russia, the Rubik's Cube solves you.
Richard Lee 0/10 you went too far.
Richard Lee wow stole it from Zarya. lol good one. when i heard "In Russia, cube" i was like i know where this is going
tX3d0b0xXr AKA ChickenMcSWags I AM MOTHER RUSSIA
In soviet Russia,the gear cube solves you
Devai
Excellent guide!
Just to add - when you have the Gear Cube with the Tony Fisher Stickers (with stickers on the inner edges) after you do Kenneth solution - if the inner stickers are not alined put the side where all the inner edges are mixed in-front of you (in this position all the horizental inner edges will have two match parallel edges) and do the following algorithm:
R,D,R,D,R,D
This should fix the inner edges on all sides.
Good luck! :-)
Go to the gear ball one of this is an issue
is a very nice
Its not working for me, why??
this is what I was looking for. So simple yet so effective :D
@@eviesturges5610 U need to place the side with all 4 inner edges wrong to face you
I'm getting stuck in the first step, when I get two Corners of the same color, the other 2 aren't together?
Me too. You managed to solve it ?
The colour scheme is different from one another,look at the colour scheme on your cube, as this tutorial is so old that the colour scheme is different back then
Just got one of these, this breakdown/tutorial made my day. Simplicity. Thanks!
C'mon guys, we have the most subscribed TH-cam cuber here, but none of his videos have a million views yet...
Who knows, this may be my first one! :)
RedKB You are so close
Youcuber
1 154 262 , what did you say ?
emanuele321 How is that possible if there are only 7,000 people in the world? ILLUMINATI CONFIRMED!!!!!
Thanks! Great video! I bought this cube because it looked extremely interesting. Your explanations are clear and concise. I was able to solve the cube relatively quick and was able to solve on my own the third try. To me this cube is easier to solve than a Rubik's cube.
It is easier
Is it worth buying ?
@@aneskatzaev9152 Yes it is. It grabs people's attention, that's for sure. Everyone I've come across assumes it's harder to solve than a Rubik's cube, but it's actually easier. There aren't nearly as many algorithms as a Rubik's cube. REDKB does a great job of explaining how to solve it. So yes, it's worth buying. You'll have fun with it.
@modmocker The Gear Cube movements are limited. So the algs you use on a 3x3 won't work.
Thank you so much for this tutorial!! I’ve always wondered how to solve this puzzle and now i can! Thanks again!
Easy explanation, short and to the point, got it on the first try, you're really cool!
that thing looks fucking evil
great tutorial, simple and easy to understand, I only watch your video once and I already can solve my gear cube :D
Thanks a lot for the video , I really appreciate it :D
please make a turtorial on the 1x1x1
Once it's scrambled, it can never be undone. Sorry, man.
+hisroyalbonkess you can always buy an new one..
Just do the Move 2 in the video a bunch of times...
You have to roll it
dude you are the best....you even teach the most basic and most obvious turns...a good teacher
I have a video for that one... It's called the Gear Shift!
Wow. This cube is so easy
just like a normal cube?
Peter Jiro Grieg Toyomasu easier than a 3x3.
Lol I buy It yesterday...really easy
I had a situation where I only had x swaps for the edges, so not knowing the orientation required I did the same orientation as the parallel swap, thinking it would work similarly to when your top edges on the Rubik's Cube are across from each other rather than two correct next to each other (in Dan Brown's method), but it just screwed it up more. What's the proper orientation to hold the cube then when you have to do the x swap?
Thanks so much for this tutorial, It really helped me out! Now I can finally solve a gear cube.
Show us other situations on the edges
this puzzle really grains my gears
You don't have to, just solve the parallels twice and it will permute the edges
+hithummah *grinds
I got mine in the mail today, it's awesome and a great tutorial too.
I have already noticed one thing though (after my 2nd solve I think) when you get to the edge orientating, it will either point like a / or a \ and when it's like / you do R4, and if it's \ do R'4 instead of R8.
@Sharonxavidor Have you tried lubricating it with silicon spray? Silicon helps a ton!
Wow thought it be harder than the original 3x3 rubics cube
Hello L...
I was doing step one and I did 4 twist then I was done😂
Awesome walk-through. You speak well and you explain well.
Awesome! Best guide to solve the gear cube that I could find!
Another great tutorial Kenneth; you are honestly the reason I can solve a lot of my puzzles. Not only are your tutorials easy to follow, but you manage to make them pleasant to watch as well. Thank you for all of the work that goes into making your videos, I know there are a lot of us who appreciate it. :D
my brain can't handle this I'm out
Pocketenderman [SGCS] its easier (the gear cube)
darwido lol
This is literally the easist cube ive ever done
+de wae is foreva ikr
Same here dude
Great Explanation! I understood it very well.
Thank you for the great and understable tutorials...
I don't have gear cube yet...but your tutorials is helpful...
I will watch again if I get my own gearcube.thanks
looks like I'm late for 6 years
Aldeniro Arief Bawono yea same
and i’m late for 9 years.
now its 8...
somehow I got a checkerboard pattern lol
thank you so much redkb
Pretty good explained! Thx for this one.
Pretend your are a pirate. Then say RRRR!!!
Yes!!! Thx for the tip, my dude
All my edges are x-swaped. I think you forgot to include that scenario
Ikr
You need to apply that algorithm from anywhere, do an x rotation, and apply the algo again.
Thanks for your solving method. It helped me A LOT!!!
@Brock4560 With the Gear Cube 90 degree turns are impossible. So a U means turn the top 180 degrees. R2 means turn the right side 360 degrees.
I believe you are the most subscribed cuber in youtube. Am I right?
Yes Indeed
like the original cube wasn't hard enough
In your video, you gave the algorithm in case the edge pieces are parallel but not if they are across from each other like the X step? What is the other algorithm?
yo thx for the vid but i have a gear cube with the tony fisher stickering and i dont know how to orient the inner stickers can u help plz
When you say U R2 U R2, in fact you are doing U2, R4, U2, R4 based on the notation of Rubik's cube
You are correct. This, however, ISNT A RUBIK'S CUBE so it uses a different notation to avoid confusion since this cube operates differently
@@AGoldSoldier And how would anyone know this if it isnt explained?
Christopher Smith
Jesus, what a necropost.
Idk, I don’t agree with my comment anymore. Don’t even know why I was so passionate about it....
@@AGoldSoldier this isnt a forum its TH-cam... videos remain relevant and comments dont go away
@@ThatSB My defense for his comment, would be that a normal quarter turn will not allow you to continue on any other turn. Therefore saying U R2, you cannot perform an R2 without moving the top layer twice. Since the normal U is turning the top layer twice, by simple connection (and watching the video) the R2 would be double layer turns.
how did i get here from the game grumps...
I used to think the gear cube looked REALLY hard, but now that I have watched this, it looks easy. Thanks :)
Great video, easy to follow. Thanks!
Thought this was a hard puzzle... I'm kinda dissapointed actually.
lixz1 same
a lot easier than the regular 3x3 😂
Show your friends that your a “professional”
Then they would be like.....
\(´◓Д◔`)/ OMG HOW IN THE WORLD
And you be like....
┬━┬ノ(▀̿̿Ĺ̯̿̿▀̿ ̿ノ) toooo ez4m3.
Thanks mate, easiest Rubiks cube i have solved yet!
This tutorial was very helpful, learned to solve it in like 10mins
great tutorial. I finally got mine in the mail and watched this whole solving on mine. was so easy! :D
Considering to buy one! Looks freaking epic! Nice solve!
I really thought gear cube is one of the cubes that are hard to solve, but now that I've watched this, it didn't even seem that hard! Thank you so much!!
hey, Kenneth
If I would put stickers on the small pieces between the centers and side pieces, would I need an extra step to solve the gear cube?
Thanks! Got one for Christmas a few days ago and solved it twice already!
Hey dude! Gratz on 1mil views!!
This video was so helpful. I FINALLY know how to solve it!
THANK YOU. I tried to solve it before with about 3 other videos. This one was the first to make sense.
hey! i want 2 ask tht u said when we make on pair of color at the very beginning im not getting d other pair already solved. pls help me and reply fast.
I wasn't even watching how to solve it, I was watching the gears and how awesome they are :D. Great tutorial man! I now know how to solve it :)
i just got my gear cube today and i solved it randomly so i decided to watch your tutorial. very good job on this tutorial
Awesome tutorial. Just plain awesome
very nice tutorial!
really like how you say steps 2 times
This video is the best, I just got my cube and accidentally scrambled it up and didn't know how to solve it but this guy helped me at!!!!!!!!
I haven't read up on this but it looks like and functions almost identically to a regular rubik cube, so should this differ?
such a fun puzzle to play with!
This was awesome! It worked for me in the first few minutes!👌
Thanks Kenneth you've helped me to solve my gear cube
Thank you so much. I can now solve a gear cube. This tutorial was very easy to follow :)
Thank’s the best gear cube tutorial ever seen 😀
,I love how this cube moves!
just got this for Christmas, it blew my mind!
Me too
I loved gear cube and your vedio helped me a lot to solve it . Thanks! Keep going.
Thank you. I got the cube just 3 hours ago (i am a beginner) and i solved it 3 times. easier than i expected. Thank you.
Dang, this cube looks pretty epic. I've been looking for a new rubiks cube challenge since i've got my 3x3x3 and 4x4x4 down. Think this might be it :D
This is a very cool cube!
No lie, I figured this out on my own. Great video!
I just bought one, can't wait to try it :D
it looks awesome!!
If you put Fisher style stickers on this, do the center piece stickers make it more difficult to solve, or do they automatically solve?
that thing looks awesome! where can i get one?
Great RED KB
Dude, soo cool!! I'm planing to get one just because of u
I updated the link. Thanks for the info.
Awesome tutorial
cool, how many kinds of rubik's cube do you have?
It's the first english tutorial I'm able to understand!! :D You're great, thanks for the video! ;)
Thank you...whenever someone says "This one is the easiest" 90% of times its very difficult...this video was very helpful
it looks cool! I'm going to get one!
THANK YOU SO MUUUUUUCH!!!!
I thought it was so difficult until I found this video. I can now solve mine, thaaaaaaanksss!!!!
Great tutorial
Hey, I have a question. How do you switch upside down between 2 edges
Just got this cube today
EDIT: thanks for the turtorial! It was super easy, and I solved it in under an hour
An hour? it was a 6 minute tutorial
Hey Kenneth. Suppose when it comes to positioning the edges that one plane is already solved, one plane needs to be X-swapped and the third plane to be parallel swapped but the OTHER WAY round. (eg. from a solved cube U R2 U R2 R U2 R U2). This feels so similar it surely must be possible to solve it in one short algorithm, but no rotation or reflection of U R2 U R2 works. Any ideas?
Wow jeez this cube really is easy, thanks!
im solving a gearminx which is aparantly exactly the same as a gear cube but i managed to get one single edge rotated 90 degrees counter clockwise, any idea how to fix this?
Hey buddy.... U are great ..... I wanna see you when u are solving.....
Thank you this is great!
Hi KB, ¿Is posible orient corners like a 2x2x2?
are the turning patterns the same as with the regular rubic's cube?