Why would it be efficient to have an external vac outlet? You are taking heated air and dumping it outside. It also creates negative inside pressure, which is a major no-no, since it brings both cold air from the outside, as well as dirt, since it brings air from spaces in the walls (electrical outlets, etc). If the vac properly filters the air, you should be able to dump it inside. If the air is still dirty, that's also a reason not to dump it outside, since you would get lint/dirt buildup on the outlet.
I like that hide-a-hose, that's the sort of clever that makes me choose one brand over another. But you're showing your insularity when you assume kitchens are built on a timber floor - mine is built on a concrete slab, as is pretty common in Australia. Can you show us how to install the dustpan fitting where the pipe is going up rather than down?
Stupid question. Why do you permanently connect the majority of piping? Instead of using tape so as when there is a clog, piping can be taken apart and put back together?
Noticed my new build home, on the first floor does not have a short 90 degree elbow at the inlet. Just a straight pipe going though the wall the the garage on the other side. Should there be a 90 degree elbow at every inlet?
awesome video, professional teaching, very helpful ,thank you!
Why would it be efficient to have an external vac outlet? You are taking heated air and dumping it outside. It also creates negative inside pressure, which is a major no-no, since it brings both cold air from the outside, as well as dirt, since it brings air from spaces in the walls (electrical outlets, etc). If the vac properly filters the air, you should be able to dump it inside. If the air is still dirty, that's also a reason not to dump it outside, since you would get lint/dirt buildup on the outlet.
I like that hide-a-hose, that's the sort of clever that makes me choose one brand over another. But you're showing your insularity when you assume kitchens are built on a timber floor - mine is built on a concrete slab, as is pretty common in Australia. Can you show us how to install the dustpan fitting where the pipe is going up rather than down?
Stupid question. Why do you permanently connect the majority of piping? Instead of using tape so as when there is a clog, piping can be taken apart and put back together?
Wow, nearly as complicated as remote control window roller blinds !
Should the PVC have and earth wire wrapped about it's length to discharge any static? 😱
You have @ 15:19 /22:37 The green arrow does not run the proper way.
In your Video the green arrow would go straight through the wye 90 to the Vacuum.
Should they use a T junction instead of the 90 degree tee elbow?
@@raczyk yes
Noticed my new build home, on the first floor does not have a short 90 degree elbow at the inlet. Just a straight pipe going though the wall the the garage on the other side. Should there be a 90 degree elbow at every inlet?
immagine any stroke, how finding cause?
Did he really say SKOVAC Industries ???
Is this the same as the DVD that Cyclovac sells for $10.00 or is the DVD more detailed?
Yes, I'm not gonna have this in my house.
@ 4:50 THAT IS NOT A STEP
👍