Thank you so much for taking the time! I know what it's like dealing the camera the extra time for editing etc. A lot of us appreciate the time you took for this. I believe there are few comments because YT requires you to create an account before leaving comments, likes, etc.
Thanks for the video. Would a misfire be a side effect of a bad valve cover gasket? I recently changed my sparkplugs and ignition coil and the misfire is still there.
yes it will. you’ll know your valve cover gasket is bad if your spark plugs and coils have oil on them. you’ll have a rough idle, low gas mileage, and loss of oil
Great Video, I am very surprised that there are over 6K viewers but only two comments. Did you have to disconnect any fuses or relays to minimize the fuel pressure on these fuel pressure pumps? Great Video!!!
What tool/tools did you use for the bolts on lower part of the valve cover? I am currently doing this and struggling with the lower bolts because of the wheel hub
Thank you so much for taking the time! I know what it's like dealing the camera the extra time for editing etc. A lot of us appreciate the time you took for this. I believe there are few comments because YT requires you to create an account before leaving comments, likes, etc.
Thanks! It's so nice of you for understanding and for taking the time giving kind comments!
This is a masterpiece salute my guy💯💯💪🏾
Thanks!
Good job hope they do mine like this tomorrow
Good video but the part I need help most is cut out ,, what tools did you use for the cover bolts closer to the wheels
Im doing my GS460 shortly. Firstly excellent job! How long did it take from start to finish? Any dinal words of wisdom?
Great video! What o rings did you replace? I’d like to do this myself as well!
I did the same thing ,how do you bleed the air out of the fuel lines, I am not getting enough fuel its starts but it shot off when on drive pls help
Thanks for the video. Would a misfire be a side effect of a bad valve cover gasket? I recently changed my sparkplugs and ignition coil and the misfire is still there.
Hi, I would not think so, but I might be wrong.
yes it will. you’ll know your valve cover gasket is bad if your spark plugs and coils have oil on them. you’ll have a rough idle, low gas mileage, and loss of oil
Great Video, I am very surprised that there are over 6K viewers but only two comments. Did you have to disconnect any fuses or relays to minimize the fuel pressure on these fuel pressure pumps? Great Video!!!
Hi, thank you for watching and commenting. I disconnected the battery. That might help minimizing the fuel pressure.
What tool/tools did you use for the bolts on lower part of the valve cover? I am currently doing this and struggling with the lower bolts because of the wheel hub
good stuff. how did you learn to do this? youtube videos?
Hi, thank you for asking. I have been working on cars for 32 years.
Do you have to drain the oil before doing this
No, you don't need to drain the oil if you don't want to.
Where are you located?
Hello Vu, thank you for asking. I am located in west side of Cleveland, Ohio.
@@friendnfamily9053 ah ok
Thank you for sharing your knowledge. Great video. Wish you was closer to Texas. I would pay you to do my valve covers :)
@@vuphung7720 No problem! Thanks again for watching and for reaching out!
@friendnfamily9053 Hey my friend, how can we connect?