Hello, if it is used to make a baton, can it meet the police standard? If this thing is used for self-defense, can he resist the bad guy? , and whether your country uses electricity to set traps for incoming wild boars
I apritiate you have made such a simple HV generator, but for maximum you will have there 3250V. That amount of Voltage of high frequncy, i asume by its color that is around 40KHz, will not be able to kill you but shure can buzz your finger. Anyway Continue with good work, and be real with the video head lines. :)
From a sparks expert - nice video and nice project. If you are just playing with clickbait numbers then fine, but if you are interested in an accurate claim then a low-current spark that starts between sharp wire ends at about a millimeter air gap, and stretches out longer when started, would be probably less than 2000V.
This works unlike anything else you see here on TH-cam. It is a blocking oscillator. But there is a risk that the leakage inductance will kill the transistor.
i woulds say 30kv. If you Tweak the turns on primary/feedback a bit,, you can get way more voltage out. And make the transistor stay colder. Maybe im wrong, i blame the beer.. Nice video, keep it up. But a schematic is always nice
@@mareksvrcina5279 Marek, Doesn't it have to at least be pulsed on the primary in order to induce voltage in the secondary? The transistor is an audio power amp, is that pulsing somehow? If it was just DC on the primary the magnetic field would expand once inducing one pulse in the secondary. Thanks if you have time to explain.
@@nooceluap7760 yes, it has to be. In fact, every switched mode power supply rectifies the AC from your power socket, filters it though some capacitors and then there is the circuitry that switches the main transformer. The DC you feed into a transformer need to be pulsed and switched at very high frequency, at least if the transformer is small and have low induction. If the frequency isn't high enough, you saturate the transformer core and the voltage does no longer induce on the secondary coil. You can see that If you take a reasonably sized transformer and apply voltage to the primary, it does induce some voltage on the secondary for a brief moment. After that, the core will be saturated and the primary will act like a short circuit. And yes, his circuit is switching, and here's a great explanation to why that happens: electronics.stackexchange.com/questions/377753
That is an 8:500 ratio transformer. Should be able to take the 12vdc from the adapter and increase it to 750 volts. Correct? Calculating like this: (500windings in secondary / 8 windings in primary ) x 12vdc supply voltage = 750 volts? The 2A supply would be diminished by the same ratio or 2000mA/(500/8)=32mA. Anyway, looks like spark gap was about right for 750v. 30KV would jump a spark gap of about 1 cm so 300,000 volts should jump a spark gap of 10 cm. If you wanted to get 300,000 volts out of the 12vdc adapter and you used 8 windings on the primary then each winding would have 12 / 8 = 1.5 volts. 300,000 / 1.5 = 200,000 windings... so theoretically you would need 200,000 wingdings on the secondary side (not practical due to many factors). A spark gap is not the ionized air in an active arc as it becomes conductive when ionized. A spark gap in air is the un-ionized gap width.
correct...as soon as I saw the claim and the size of the spark gap I immediately thought......BULLSHIT !!!!! yeah...it's around 30Kv per centimeter or so....
@@arminjafari1667 - This is true, but the air breakdown voltage is strongly dependent on the shape of the electrodes. The value of 3 kV/mm applies to smooth spheres with a large radius. For pins it will be about 1 kV/mm. And the guy is a total idiot - maybe he meant 300000 mV :-)
Nice work! . Can you modify this into continuously operating oscillator to make a Negative iron generator below 15KV, with a reverse biased high voltage diode??
First off, he does not have 15kv here, maybe 10 at most. Second, yes you can rectify the output, one direction will produce a far higher voltage output than the other, keep the capacitor low (unless you want to die), connect to the ionizing needle through a high voltage high resistance resistor(to reduce the danger of shock), value of this resistor and the filter capacitor depends on design specifications.
You are right. Ignition coil is used to produce high voltage that goes to the spark plug. It is actually a step up transformer having plenty of turns in the secondary but finer wire than the primary.
atento saludo me gusto su invento.....Dios lo Bendiga...me gusta la electrónica....quisiera saber bien claro el valor de las resistencias.....la de color verde azul y negro si se notan bien claro, la otra de que colores son...maestro.... muy amable...
@@richardguilarte1654 amigo mío, no me importa, solo busqué confirmación en Internet, pero no la encontré, ¿puedes dejar el enlace a la hoja de datos? www.datasheetcafe.com/d718-datasheet-npn-transistor/
I made one with good ol' 2N3055 while back when I was a kid and added a voltage doubler with 68nF capacitors. And accidentally touched it. It was damn powerful and it hurt as much as hitting my hand with sledgehammer. I checked and it was drawing 150 watts.
Sei troppo ottimista , se raggiungi i 15.000 volt puoi essere contento !!! Se fossero i 300.000 volt come scritto , ti si brucerebbe tutto !!! I resistor non sono da 330 ohm , ma in base ai colori che si vedono sono da 57 ohm . saluti !!!
Show the potential of your experiment by using voltmeter Then we trust in your video But it never happens to increase the potential of 6 V to 300000 volts ....
Me gustó muchísimo, pero no dejó nota de qué clase de transistor utilizó y qué tipo de resistencias. Por favor mas pendiente con esos pequeños detalles
It's definitely not 300 kV, I think around 3000V. The arc can be stretched for some distance thanks to the quite high current, but only once it's been started. And if you see from the video, the arc begins only and very small distace.
that's right, for every 10KV it generates an arc from 1 cm onwards, so it is possible that it does not exceed 5KV. isso mesmo, para cada 10KV gera um arco a partir de 1 cm, portanto é possível que não passe de 5KV.
Eso no deve alcanzar ni los 10kv, ese Voltaje ya es mortal, igual eso depende de la intensidad. Porque lo que mata no es el Voltaje si no la intensidad¡ saludos bro
Please I have questions, please which type or which size of wire, is the best we can use for secondary coil and primary coil? Please I need your explanation on this. May God continue bless you
@@goldenhamiss9772 sorry..Im still learning I dont have Complete knowledge... I am a beginner... but if the transistor keeps on swithing then its heating issue ,according to me... .use heatsink and correct base resistors
@@goldenhamiss9772 probably few reasons behind it . 1.load will access 2.transister may be damaged.. 3.the components which connected to transistors may be damaged...
Good work sir, but I must say that. If that spark reach to 1 kV you're very optimist. Don't mind how far spark will become, but from what distance it will start, because in that moment voltage between electrodes break air resistance. After that spark will become bigger because it creates a sort of "road" of ionised and hot air that decrease air resistance and the spark distance can increase. If 1 cm of air necessitate of approximately 16 kV to be break from voltage, your less than 1 mm spark will have a voltage 10 times smaller. So approximately and for my opinion optimist 1000 Volt spark. Sorry for my very awful English knowledge. Good to see your video
Transistor name is D718
Hi friend
@@kingshibahaczix4037 no it isn't fake
Why you not show the code???
Bro will it work with d882 npn?
Hello, if it is used to make a baton, can it meet the police standard? If this thing is used for self-defense, can he resist the bad guy? , and whether your country uses electricity to set traps for incoming wild boars
I apritiate you have made such a simple HV generator, but for maximum you will have there 3250V. That amount of Voltage of high frequncy, i asume by its color that is around 40KHz, will not be able to kill you but shure can buzz your finger. Anyway Continue with good work, and be real with the video head lines. :)
That's illigal
From a sparks expert - nice video and nice project. If you are just playing with clickbait numbers then fine, but if you are interested in an accurate claim then a low-current spark that starts between sharp wire ends at about a millimeter air gap, and stretches out longer when started, would be probably less than 2000V.
More like 3 kv , see his initial length is approx 1.3~1.5mm
Thanks for ur kindness for sharing ur best experiences
Many beautiful ideas, and you value a lot of intelligence
Muito top hoje eu coloquei meu projeto em prática em breve vou posta meu vídeo
SK Creative =NAMASKAR
Well done, good job,
|| JAI HIND ***JAI SINDH ||
Good job my friend +1 Like
This works unlike anything else you see here on TH-cam. It is a blocking oscillator. But there is a risk that the leakage inductance will kill the transistor.
i woulds say 30kv. If you Tweak the turns on primary/feedback a bit,, you can get way more voltage out. And make the transistor stay colder. Maybe im wrong, i blame the beer.. Nice video, keep it up. But a schematic is always nice
So you plug the 6V transformer and how much it consume? 6V or 300000V?
I am happy to learn about the changing of direct current to alternating current.if possible i need more about it again.
Actually it hasn't changed. It's still DC
@@mareksvrcina5279 Marek, Doesn't it have to at least be pulsed on the primary in order to induce voltage in the secondary? The transistor is an audio power amp, is that pulsing somehow? If it was just DC on the primary the magnetic field would expand once inducing one pulse in the secondary. Thanks if you have time to explain.
@@nooceluap7760 yes, it has to be. In fact, every switched mode power supply rectifies the AC from your power socket, filters it though some capacitors and then there is the circuitry that switches the main transformer. The DC you feed into a transformer need to be pulsed and switched at very high frequency, at least if the transformer is small and have low induction. If the frequency isn't high enough, you saturate the transformer core and the voltage does no longer induce on the secondary coil. You can see that If you take a reasonably sized transformer and apply voltage to the primary, it does induce some voltage on the secondary for a brief moment. After that, the core will be saturated and the primary will act like a short circuit.
And yes, his circuit is switching, and here's a great explanation to why that happens:
electronics.stackexchange.com/questions/377753
Very good bro!
The voltage is really high. You did well. I also want to make one like yours
This was the same principle used for CRT monitor it needs 25 kv to Scan the picture so HT Voltage is created using LOT (Line put transformer)
👍👍👍👍👍Nice👍👍👍👍👍
th-cam.com/video/Bsp0sTDFRbc/w-d-xo.html
Plzz visit my TH-cam channel
Nice
wow amazing
very good frend
That is an 8:500 ratio transformer. Should be able to take the 12vdc from the adapter and increase it to 750 volts. Correct? Calculating like this: (500windings in secondary / 8 windings in primary ) x 12vdc supply voltage = 750 volts? The 2A supply would be diminished by the same ratio or 2000mA/(500/8)=32mA. Anyway, looks like spark gap was about right for 750v. 30KV would jump a spark gap of about 1 cm so 300,000 volts should jump a spark gap of 10 cm. If you wanted to get 300,000 volts out of the 12vdc adapter and you used 8 windings on the primary then each winding would have 12 / 8 = 1.5 volts. 300,000 / 1.5 = 200,000 windings... so theoretically you would need 200,000 wingdings on the secondary side (not practical due to many factors). A spark gap is not the ionized air in an active arc as it becomes conductive when ionized. A spark gap in air is the un-ionized gap width.
correct...as soon as I saw the claim and the size of the spark gap I immediately thought......BULLSHIT !!!!! yeah...it's around 30Kv per centimeter or so....
If it was 300kV, there's no way I'm holding those skinny wires with my bare fingers
What is d best Formula To Make ds One?
“What are you doing in there?”
“...nothing mom”
Really super sir
Good idea 👍👍👍
Air can ionize 10000v per 1cm and 300000v can jump around 30cm, you are lie ☹️
The cable insulation also cannot withstand 300kv!
You lie also , for 1 Cm need 1000V , not 10 000v , in video we see aboud 3 cm. 3cm =3000v
TEHNO MD see this at 3:19 th-cam.com/video/DOMs7mYm_zs/w-d-xo.html
6 Volts input supply x (500 secondary/ 5 primary) ~ 600 V
Air streamer breakdown ~ 3 kV/mm
@@arminjafari1667 - This is true, but the air breakdown voltage is strongly dependent on the shape of the electrodes.
The value of 3 kV/mm applies to smooth spheres with a large radius. For pins it will be about 1 kV/mm.
And the guy is a total idiot - maybe he meant 300000 mV :-)
3:01 lol 😁 your pets are bored...
.
Birds are like.. come on im hungry
Cows like.. moooo
YEAH, stop playing inside and come play ball with me... 😅
He is neglecting them hhhhh
Nice work! . Can you modify this into continuously operating oscillator to make a Negative iron generator below 15KV, with a reverse biased high voltage diode??
First off, he does not have 15kv here, maybe 10 at most. Second, yes you can rectify the output, one direction will produce a far higher voltage output than the other, keep the capacitor low (unless you want to die), connect to the ionizing needle through a high voltage high resistance resistor(to reduce the danger of shock), value of this resistor and the filter capacitor depends on design specifications.
Here a maximum of 2 kV, 15 kV - is an advertising trick.)
@@emery5581 You plug in the 6V transformer, 6V input, how much it consume if the output is 300.000V? 6V or 300000V?
@@user-lq2qh2im1r Thanks for the information! calculation shows it's only 3 KV not 300KV. that's why I get confused.
@@rishanranatunga4851 hey bro, how did you calculate ?? He didn't mention number of primary turns.. Or did he..?
i wonder if we make the inverse proccess, maybe we could make a spot welder, with some turns of thick wire in the secondary
Soldering skills -1...
Amazing.......
Amazing
High voltage flyback transformer simple way
He made it from scratch. Pretty cool
Keatif bgt bang
Good 👍
much close to the way a old ignition coil works(i'm brazilian, my english is very bad. sorry)
Your English is really good, but instead of "much" you should write "very", and since "old" starts with a vowel (o), the "a" should be "an"
Vá si lascar 🇧🇷 😂
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
You are right. Ignition coil is used to produce high voltage that goes to the spark plug. It is actually a step up transformer having plenty of turns in the secondary but finer wire than the primary.
Juoooossss...
Nice job
atento saludo me gusto su invento.....Dios lo Bendiga...me gusta la electrónica....quisiera saber bien claro el valor de las resistencias.....la de color verde azul y negro si se notan bien claro, la otra de que colores son...maestro.... muy amable...
D718 n-p-n Emitter - U, Punches 1-2mm = 6kV maximum, and stretches the arc to 10-12mm. Pw 12v 2A
(goats bleat, the village is excellent)
amigo no es NPN,es PNP. el voltaje + entra es por el emisor.
@@richardguilarte1654 amigo mío, no me importa, solo busqué confirmación en Internet, pero no la encontré, ¿puedes dejar el enlace a la hoja de datos?
www.datasheetcafe.com/d718-datasheet-npn-transistor/
Consumption current can avalanche a transistor!
I made one with good ol' 2N3055 while back when I was a kid and added a voltage doubler with 68nF capacitors. And accidentally touched it. It was damn powerful and it hurt as much as hitting my hand with sledgehammer. I checked and it was drawing 150 watts.
Its very good and useful
The editting is so good
Fake
excellent
Sei troppo ottimista , se raggiungi i 15.000 volt puoi essere contento !!! Se fossero i 300.000 volt come scritto , ti si brucerebbe tutto !!! I resistor non sono da 330 ohm , ma in base ai colori che si vedono sono da 57 ohm . saluti !!!
Wow, WoW WOWOOO!!! Interesting!
Merci
Nice one
th-cam.com/video/Bsp0sTDFRbc/w-d-xo.html
Plzz visit my TH-cam channel
Thank you, but what kind of transistor and parts are used? Please reply,
I'm Arab😅
judging by the spark length you have few kV only
@Y B that is exactly what you have th-cam.com/video/cK8ISnDJ2OI/w-d-xo.html
(do not confuse with the discharge plasma length)
There are 12 loops at primary winding, so for 300 000 v you should have 600 000 loops on secondary winding
The real voltage in the apparatus is less than 30kV, not 300kV!
@@LucasPereiradaSilva I know
@@LucasPereiradaSilva nem 30KV no máximo 5KV, para cada 10KV gera um arco de 1cm
THANKS
th-cam.com/video/Bsp0sTDFRbc/w-d-xo.html
Plzz visit my TH-cam channel
Good video
Show the potential of your experiment by using voltmeter
Then we trust in your video
But it never happens to increase the potential of 6 V to 300000 volts
....
dont trust
Its not 300000v
Edan eyy
Me gustó muchísimo, pero no dejó nota de qué clase de transistor utilizó y qué tipo de resistencias. Por favor mas pendiente con esos pequeños detalles
1.21 GIGAWATTT wooooooowwww fiiiiga!
Amizng step up converter bro,, I try this,,
It's definitely not 300 kV, I think around 3000V. The arc can be stretched for some distance thanks to the quite high current, but only once it's been started. And if you see from the video, the arc begins only and very small distace.
Exactly
exactement
même pas 3000 V
that's right, for every 10KV it generates an arc from 1 cm onwards, so it is possible that it does not exceed 5KV.
isso mesmo, para cada 10KV gera um arco a partir de 1 cm, portanto é possível que não passe de 5KV.
Amazing 👍
300,000volt would make an arc 30cm long! This is ca 10,000volt.
5000 volt
Could have been even less than 5000 it look like he had to damn near touch the wires together to get it to Arc
@@Magneticitist That is my guess as well, 5KV tops. The guy is illiterate.
More like less than 3kv, the cheater had to touch the electrodes to start the arcing
Electrostatic generator,kinda in the Tesla Zone.🏁
#PowerMax innovation
Please do a vid on how to extend a RFID signal please 👍🏻🇬🇧
✌
can it weld into wire 2 and 4 sizes?
The mosth🤗😇😇🤗😘
Máximo 15000v
10,000 PORQUE SOLO ALCANZA 1CM DE ARCO
@@gilbertopina8618 dije 15000 exagerando un poco porque de lejos es difícil calcular la distancia exacta.
Máximo 3000v
2000 V sino no puduera tocar con las manos los cables
Eso no deve alcanzar ni los 10kv, ese Voltaje ya es mortal, igual eso depende de la intensidad. Porque lo que mata no es el Voltaje si no la intensidad¡ saludos bro
Mariness Alexsunderoffnu Nikolujevskyear! I love you!
Nice work
Please I have questions, please which type or which size of wire, is the best we can use for secondary coil and primary coil? Please I need your explanation on this.
May God continue bless you
You need capacitors and diodes wired in series to get actual high voltage generating. This is part of the circuit but not the whole process.
If you want DC, true that. If you want to make fancy Tesla like things, you want AC voltages and these coils to operate at resonance.
Oh good i like this
If that was 300 KV you wouldn't be holding wires that have that sort of isulation.
You made my day ! LMFAO
В кулере от компьютерного блока питания есть какая то проволока, вроде бы достаточно тонкая для вторички.
Где сердечник замутить?
wow
Wow
This is not 30KV. 30KV sparks from way too far. It seems 1KV to 3KV output.
I like this amazing work..
and the other resistor is 560 Ohms
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
What kind of plastic transformer was that and any idea where I can get one?
it works s like a flyback transformer in old CRT TV'S
Dear give more information Transistor Resistor and how to wire
resistor yellow-purple-black is 47ohm, other resistor green-blue-black is 56 ohm.
@@lions8141 Thanks
You didn’t tell us the type of Transistor?
@@mannamiah5997 Transistor is 2SD718
Thank You, Brother 💕😁
which transistor did you use?
In order for it to be 300,000V, your primary would need a couple hundred thousand windings. I’m hissing it’s closer to 10-20 kV
Keren...mantabsss 👍👍👍👍👍
Emazing good job. God job. tenks.
👍
Sir kindly mjhy ye btain k mainy mosquito killer bana tu ignition coil banani h
Ok hay dang hoc.thank’s
Same technique is used in eht of crt tv, which is 11kv only
I mean... this is only like 1kv or 2kv, not 300kv
Like ignition,
add two carbon leads at the end of output...they dont melt easily
Sorry guys help me, i have made an inverter but when i connect with 12V battery transistors become too hot and it keeps on and off itself.
What's app number +255677214905 help to make my inverter work.
@@goldenhamiss9772 sorry..Im still learning I dont have Complete knowledge... I am a beginner...
but if the transistor keeps on swithing then its heating issue ,according to me... .use heatsink and correct base resistors
@@goldenhamiss9772 probably few reasons behind it .
1.load will access
2.transister may be damaged..
3.the components which connected to transistors may be damaged...
@@ComedySots damaged transistors hust act as closed switch..
สุดยอด
Good work sir, but I must say that. If that spark reach to 1 kV you're very optimist. Don't mind how far spark will become, but from what distance it will start, because in that moment voltage between electrodes break air resistance. After that spark will become bigger because it creates a sort of "road" of ionised and hot air that decrease air resistance and the spark distance can increase. If 1 cm of air necessitate of approximately 16 kV to be break from voltage, your less than 1 mm spark will have a voltage 10 times smaller. So approximately and for my opinion optimist 1000 Volt spark. Sorry for my very awful English knowledge. Good to see your video
Mr how many turn if out put only 100 volt and what transistor and resistor must i use,thank you great video
use transistor D1880 hi speed with damper......
Great, but how do you benefit from this in practice
Stun gun
1.000.000 views... of benefits :)
Perhaps that 3KV output can lit a busted fluorescent tubes, no need starter like an arc tube of HPS, Metal Halide nominal 70W, 250W, 400W .
Good good baiya
Mantap
Can we measure this voltage ?
Good project