Circuit demons are nice but I’ve heard such bad things about their customer support. One guy said he got condensation within a month and they wouldn’t send a new set/refund him. That’s just what I’ve seen though
Definitely an 02-07 downpipe. I threw a downpipe from a 2016 STi on my 05 and chopped and rewelded it so it fit. They’re the same shape and flange. Only difference is the length at the very end where it connects to the midpipe
Devin you don't need anything more than an empty plastic bottle with 2 holes drilled into the cap. One for clear airline tubing submerged in brake fluid and the other as an air vent. The secret is to route the tubing from the bleeder screw so it going up at like a 45* angle and then down into the bottle of brake fluid set on the floor. You don't need Bobby or Jared to pump. Open the bleeder screw and pump them a few times yourself then check the airline until it's solid brake fluid and your good. Just make sure the master is topped you don't need any vacuum or pressure bleeder or anyone to pump this method works great man.
Devin, I recently rewatched your ralleybacker FRS short with Bobbi and you should film something like that again. Really shows off the details of the car. It's awesome to see the progress of the cars, but don't be shy to flex a little 💪 Great video
Bro you are killing this!!!! You should ad some seals along the edge of the wide body kit where it meets the fender to make it look cleaner👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽
@@westonmickey3890 both manifolds are top performers it all comes down to the IC pipes and if you have a fabricator for custom install for proper fitment
Devin, for bleeding brakes alone use a small rubber hose the first tightly onto the bleeder valve, ran into a water bottle with about 1in of brake fluid to keep air out of the hose. Works awesome
Yeah all big companies stopped selling SS catless down pipes but... there available on eBay, unbranded and made by the same companies and sold under a separate label so there main company dosent get jammed up by the EPA.. 😉👍
Hey man seeing that the brake lights are still on and the lights on the dash, I would check the adjustment on the brake light switch above the brake pedal! There was a recall for those.
Hey devin, the tail lights may be stuck on due to the switch on the steering column, on my 07 i had the same issue and i accidently hit that switch, flipped it back and taillights turned off.
There's literally a button somewhere I think it's on the steering column that one it's press the brake lights down full-time I have an issue with my 07 STI
Devin, get some circuit demon headlights for the subi!
I’ll be picking some up for my 07 STi, but man they’re a bit pricey !
@@BoostedBrando but so damn sexy! Plus the different options that he offers is so dope!
Circuit demons are nice but I’ve heard such bad things about their customer support. One guy said he got condensation within a month and they wouldn’t send a new set/refund him. That’s just what I’ve seen though
@@1874rb Yes they are !
I’m in the middle of a ETS rotated and Built block or the money for some headlights wouldn’t seem to bad lol.
@@WedgewoodGarage idk I have had great customer service from them. They replaced multiple parts
for me without a hassle.
Definitely an 02-07 downpipe. I threw a downpipe from a 2016 STi on my 05 and chopped and rewelded it so it fit. They’re the same shape and flange. Only difference is the length at the very end where it connects to the midpipe
I’m so glad you’re back Devin I always look forward to your videos hope you get well soon brother don’t try and push yourself to hard.
The brake light thing could be the plastic spacer under the petal is broken. I had the same problem with my skyline.
Devin you don't need anything more than an empty plastic bottle with 2 holes drilled into the cap. One for clear airline tubing submerged in brake fluid and the other as an air vent. The secret is to route the tubing from the bleeder screw so it going up at like a 45* angle and then down into the bottle of brake fluid set on the floor. You don't need Bobby or Jared to pump. Open the bleeder screw and pump them a few times yourself then check the airline until it's solid brake fluid and your good. Just make sure the master is topped you don't need any vacuum or pressure bleeder or anyone to pump this method works great man.
I'm thankful for Devin and all his free content. Fast Cars & Freedom.
Devin, I recently rewatched your ralleybacker FRS short with Bobbi and you should film something like that again. Really shows off the details of the car. It's awesome to see the progress of the cars, but don't be shy to flex a little 💪
Great video
A video from Devin makes for a perfect dessert for today. Happy Thanksgiving to everyone.
Bro you are killing this!!!! You should ad some seals along the edge of the wide body kit where it meets the fender to make it look cleaner👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽
Ew
Grimm speed setup looks awesome proper fitment is always a plus. Only thing that would look better is a reverse mounted manifold setup with that FMIC.
Are you referring to the process west manifold?..
@@westonmickey3890 Process West or AMS
@@DJ_Driven which one is better?...
@@westonmickey3890 both manifolds are top performers it all comes down to the IC pipes and if you have a fabricator for custom install for proper fitment
Devin, for bleeding brakes alone use a small rubber hose the first tightly onto the bleeder valve, ran into a water bottle with about 1in of brake fluid to keep air out of the hose. Works awesome
What a journey that's got to be your favourite car 🚗
Hell yeah Devin, I know it’s not fully done but it’s good to see the Susti on the ground back up an running! 🙌🏼
this man puts in more work than ANYBODY
Should be a switch on the steering colum on top to turn the park lights off. I had it on my legacy wagon it’s a Subaru thing
Yeah all big companies stopped selling SS catless down pipes but... there available on eBay, unbranded and made by the same companies and sold under a separate label so there main company dosent get jammed up by the EPA.. 😉👍
😃that smile 😃susti runs well because Devin works his magic
Exhaust looks 👌🏼rear 👌🏼
I’d love to see when you got the built block a rotated Garrett G series setup!
There’s nothing like the first drive of a fresh built project..
Subie parking light is why the tails are on
Let’s get it boys
I can't wait to see what you do to the Supra. Paint correction and some sic mods oh yea!
Shoulda gone single pipe invidia N1 street 3" straight pipe with a resonated mid pipe, my 09 hatch sounded so mean with that set up
Happy Thanksgiving Devin, stay healthy 🙏
Happy thanksgiving 🦃
Check the button on top of the steering wheel column
Hey man seeing that the brake lights are still on and the lights on the dash, I would check the adjustment on the brake light switch above the brake pedal! There was a recall for those.
Shocks me how people can dislike devins vids🤯 theyre amazing
I know hey, special bread. But keep in mind that’s less that %1 always will be trolls out there.
Ready for Jared's car to get built!!!
A short video today? Not even bro😆 Happy thanksgiving fam🤙🏼 Cant wait for the next build
Heck the brake switch under the brake peddle for the tail lights staying on
will miss the susti vids, loved this build more than any tbh
Happy thanksgiving you guys
Fuegooo! Bangin on em !!
That Supra needs some love
Thumbs up Devin , keep going brother
Susti is looking proper 🤘🏻🤘🏻
those exhaust tips are FIRE son!
The SusTi needs a clear hood, That GrimmSpeed set up is a work of art
Brake switch ( taillight on )
The old X-force exhaust looks like it was definitely for a hatch, sedan spec does not have the big drum at the back, just cannons from memory.
Happy Thanksgiving Devin!
Soooo weird hearing how quiet the supra can be compared to my obnoxiously loud ass car lmao keep up the good work devin!
Pleaseeee build the Supra like Baltic Supra’s 👏🏻❤️
The mk4 is the same as the ct9a they are just perfect
dont have u parking lights on do you ? switch above the steering wheel ?
Hey devin, the tail lights may be stuck on due to the switch on the steering column, on my 07 i had the same issue and i accidently hit that switch, flipped it back and taillights turned off.
Not on the newer ones
@@joeywaters1522 oh i didnt know they got rid of that on the 08+
Legendary
Happy Thanksgiving
It's the brake lights, the switch on the brake pedal
Let's gooo!!
Lowkey sound insane with the 3inch gap lmao
JDM length downpipe, theyre shorter.
Switch on top of steering column, it's Subaru parking lights.
I lowkey want to trade my 2020 WRX for this STI lmfao it looks so fire bro!
Dude! When are you gonna tackle an RX7 project!!!????????
As always sick video, but the song at the start was absolute fire! What is it?!
There's literally a button somewhere I think it's on the steering column that one it's press the brake lights down full-time I have an issue with my 07 STI
Hatch/sedan downpipes are the same.
That downpipe is probably hacked or something like they did with the catback lol
Invidia still makes cat less downpipes
Brake light switch to check for the brake lights
check to see if the little grommet on the pedal for brake switch is still there
Are you going to be doing the led unit tail lights upgrade fella? On the supra
Brake padal switch
JDM downpipe is my guess for that EJ20x?
Pretty sure you faced the tail lights being on issue in an old subaru forester video?
can I have that old exhaust ?
🔥💯👌🏽
Hey devin how often do you clean out the shop? Like pressure was the floors and blow everything out?
If you decide you would ship that exhaust I’m down to buy it
Are you running an external wastegate for your build?
Take that downpipe to you brother Austin he will do a good job 🙂👌
👍🏻
Did you ever announce who won the lights
Lookkinnnnn gooodddd!!!!
Love your frs
Super 👍👍👍
It's not that God damn switch on top of the steering wheel shroud is it.
Big worm
Is the launch at 11am pacific? Or est?
Devin, what wheels is this car rocking?
Prolly a stupid question, but what’s your brand Vasyn mean/stand for?
The goat
The black front mount with grim speed on it looks so Chur, colour way looking crazy 😮💨
Yessirrrr
Do you send before and after to the people you buy cars from?
Yessir
Is it the switch on the steering wheel
Jared looks like such a dry friend. Like he just dreams of having a life like devins. Wishing he had cool cars a nice girlfriend a nice house etc
Downpipe might be for jdm
Whose tuning your car?
what suspension are you running??
👍🏻👏🏻🔥
Music 3:03 ???
Sup troops!
Whoa I clicked on the video for the thumbnail and I get hit with a big ass jawline monsterchin lmao jk
Use a bat Slide the seat forward pushing the bat into the pedel. Solo bleed job.
The rear tails can be on because the little switch on the steering wheel plastics is flipped up?
Did you check the button next to the steering wheel? if it's pressed in, the downpipe gets shorter. :-)
Devin you better no sale SUSTI
Can get a tomei catless downpipe for ur car for like 500$