Hi Adrian, thanks a lot for the video. My Piccolo XS suddenly stoped to switch on. Thank's to your tutorial I opened the machine and located the problem within minutes) It was melted cable which was the problem. 5 minutes et voilà
Adrian, thankyou very much for this video, what a pain in the a**e to get those clips underneath while attempting to open the sides...how many times either one or the other, or all clip back into place, I needed 4 extra pairs of hands 🤣🤣!
Thank you for the video : it was helpful. However it is nearly impossible to dismantle this machine without breaking some (many !) clips points. Mine had a problem of a nearly cut wire (L connector on the electronic board) and/or the board was too low and did not detect the cartridge tray anymore. Before the fix it was working randomly because of the vibrations of the pump it was stoping any now and then...
hey , does it go well with reusable stainlee steel capsules? i want to buy the machine only for reusable capsules, Original capsules or matching capsules are not profitable, not varied, and also the whole matter of the synthetic milk in the capsule which is supposed to be a portion of milk for an espresso portion, instead of regular normal milk, it really does not seem good to me. thanks a lot in advance
I fixed my Krups with your videos (bypassing the capsule sensor). Thank you sir! 👍
Hi Adrian, thanks a lot for the video. My Piccolo XS suddenly stoped to switch on. Thank's to your tutorial I opened the machine and located the problem within minutes) It was melted cable which was the problem. 5 minutes et voilà
Thanks so much for this detailed explanation. I finally replaced the o-ring.
Adrian, thankyou very much for this video, what a pain in the a**e to get those clips underneath while attempting to open the sides...how many times either one or the other, or all clip back into place, I needed 4 extra pairs of hands 🤣🤣!
Спасибо за вашу работу. Подскажите какой элемент на электронной плате отвечает за включение машины. И что-то за элемент обозначенный I1
Thank you for the video : it was helpful. However it is nearly impossible to dismantle this machine without breaking some (many !) clips points. Mine had a problem of a nearly cut wire (L connector on the electronic board) and/or the board was too low and did not detect the cartridge tray anymore. Before the fix it was working randomly because of the vibrations of the pump it was stoping any now and then...
Hello Adrian.
Good video, thank you bro
Thank very much!!👋🏻👋🏻👋🏻👋🏻👋🏻
Thank You..
Hi Adrian,cab i bypassing the thermal fuse,or i must replace it?
How should the water tank seal be replaced?
hey , does it go well with reusable stainlee steel capsules? i want to buy the machine only for reusable capsules, Original capsules or matching capsules are not profitable, not varied, and also the whole matter of the synthetic milk in the capsule which is supposed to be a portion of milk for an espresso portion, instead of regular normal milk, it really does not seem good to me. thanks a lot in advance
How do you get the pin (the plate with pin) out as would be same as mine as want to clean mine
Thank you very much for the video as I was able to disassemble the machine much easier.
How do you remove a stuck capsule, I forgot to remove mine from the machine after making coffee and now it won’t come out? Can someone help please!
Hola. Cual es el tamaño del destornillador. Which size screw torx? Thank you
Ok, but now I dont know how to re assembly xD
How to reset the orange light on this stupid machine?
The clips on this are a joke