hi , could you use the aux mix to send to a hardware compressor then back into my audio interface for mastering back into my daw , ?? if so should I copy main mix to the aux or track main mix ,, as my audio interface only has 2in -2 out
Hi, I use the SPD-SX as well. I was just wondering. Do you use MIDI to control your mixer? What is with samples? Are they saved directly to the SPD-SX, or do you play them from the mixer or from a DAW? One of my solutions would be to use the SPD-SX as a MIDI controller to play the samples from the mixer directly. Is there a way to send a MIDI note to the mixer to play songs and also switch them, like go to the next song? The other solutions are DAW or directly in SPD-SX.
Very helpful. Does the Touchmix set up it's own WiFi then? I have an app on my other on stage iPad called OnSong that, in addition to backing tracks, lyrics, sets etc, runs light programs via WiFi. I'm wondering if the QSC Touchmix WiFi network acts like a normal WiFi router. Does anyone have any insights on that?
Hey, I just tried doing this & it’s not working. I plug in the little USB & I do not receive that first message. I’ve tried powering down & starting over & still got nothing. The little blue light on the USB isn’t flashing like it did before either. Any help would be much appreciated. Thank you
Tony Draper once you plug in the usb dongle, you have to connect to it via your iPhone just like you would if you were gonna connect to Wi-Fi at home etc , go to settings , WiFi then tap on it ,
DrummerG - Hey, thanks so much for the reply. Truly appreciate it. I did originally do exactly what you said & it wasn’t popping up on my computer/IPad either. Thing is, I got my TM16 when it first came out years ago so it’s on a really old operating system. I spoke to QSC & they gave me instructions to download some drivers ect & then I can update the firmware. Idk, I haven’t tried it yet but I am gonna try later on this week. Thanks again.
Tony Draper I’m going to upload a video on how to update your firmware , I just received notice there is an update i should have it done by end of week
Thank you for putting up a video that actually shows how do something. Most are so vague and done so fast I can't follow them. Great job.
Excellent video. Went straight to the point. Thanks man.
Cheers!!!
Thank you very much this video helped me , I didn’t know how to do it , thank you, thank you 👍👍👍👍👍
Thanks for the video instruction. Great job. Continued success.
Very useful, thanks you!
hi , could you use the aux mix to send to a hardware compressor then back into my audio interface for mastering back into my daw , ?? if so should I copy main mix to the aux or track main mix ,, as my audio interface only has 2in -2 out
Hi,
I use the SPD-SX as well. I was just wondering. Do you use MIDI to control your mixer? What is with samples? Are they saved directly to the SPD-SX, or do you play them from the mixer or from a DAW? One of my solutions would be to use the SPD-SX as a MIDI controller to play the samples from the mixer directly. Is there a way to send a MIDI note to the mixer to play songs and also switch them, like go to the next song? The other solutions are DAW or directly in SPD-SX.
Very helpful video. Great pice of kit too. Can't recomend it highly enough!
So can each band member control their own monitor mix on their own iPad/iPhone?
Yes
When it works
Very helpful. Does the Touchmix set up it's own WiFi then? I have an app on my other on stage iPad called OnSong that, in addition to backing tracks, lyrics, sets etc, runs light programs via WiFi. I'm wondering if the QSC Touchmix WiFi network acts like a normal WiFi router. Does anyone have any insights on that?
Hey, I just tried doing this & it’s not working. I plug in the little USB & I do not receive that first message. I’ve tried powering down & starting over & still got nothing. The little blue light on the USB isn’t flashing like it did before either. Any help would be much appreciated. Thank you
Tony Draper once you plug in the usb dongle, you have to connect to it via your iPhone just like you would if you were gonna connect to Wi-Fi at home etc , go to settings , WiFi then tap on it ,
DrummerG - Hey, thanks so much for the reply. Truly appreciate it. I did originally do exactly what you said & it wasn’t popping up on my computer/IPad either. Thing is, I got my TM16 when it first came out years ago so it’s on a really old operating system. I spoke to QSC & they gave me instructions to download some drivers ect & then I can update the firmware. Idk, I haven’t tried it yet but I am gonna try later on this week. Thanks again.
Tony Draper I’m going to upload a video on how to update your firmware , I just received notice there is an update i should have it done by end of week
DrummerG - sounds good. I’ll be watching.
@@tiktocdrummer hey i changed for the touchmix 30 do i need the wifi dogle to ce ct 2 phone??
Solved. Thanks.
Pedpost Urgent Care have you upgraded your firmware on your board? I never had that problem
Great video. Thanks for posting.
?hi how far can you go with the ipad from the mixer? did you have eny drop outs
thanks
Rashi Bar-Rashi I have walked 30ft away from mixer using iPad with no drop
Hey i have question does the usb dongle comes with mixer or do you have to buy it sperate ?
I had the 16 it come with it got the 30 n it does not wich is weird but just orderd one waiting
Does it matter if it's the top or bottom USB port?
No it doesn't matter, either of the 2 USB port's will work.
@@tiktocdrummer Awesome, thank you!
App control doesn’t work on my 2 devices. iPad Air 2020 and iPhone 13. All permissions granted but everything is greyed out. Very disappointed
Good video
Thx
how many remote controls you can pair ??
Thanks
We use 5/6 in our band
When they work
What usb dongle?? Same as we found at mouse dongle? How can i have the dongle? Tq
You have to buy the mixing board, it comes with its own USB dongle/network hub.
@@tiktocdrummer the 16 came with it not the 30
I want one