How To Make extension Board From PVC Pipe At Home

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.ย. 2024

ความคิดเห็น • 396

  • @technicalninja711
    @technicalninja711  2 ปีที่แล้ว +48

    Hello Friends!!!
    Video kaisi lagi...???
    Comment Below..👇👇👇

  • @NiravBhatiya
    @NiravBhatiya 2 ปีที่แล้ว +32

    AZ electrician /electrical engineer I would not recommend one switch between three sockets but you can put 16A switch then it's acceptable 😊 by the way nice idea 😉

    • @Baasnhuish
      @Baasnhuish 2 ปีที่แล้ว +1

      Why didn't he use red wire for live, and black for neutral.

    • @sagarupadhaya9295
      @sagarupadhaya9295 2 ปีที่แล้ว

      It depends on load

    • @malikalihassanawan1260
      @malikalihassanawan1260 2 ปีที่แล้ว

      each socket
      should each switch

    • @divyanshpathak8804
      @divyanshpathak8804 2 ปีที่แล้ว

      @@Baasnhuish in india there is three phase wiring so not every house use black and white there are three phases also red blue and yellow so whichever wire you get you can use

    • @systemhaiapna7
      @systemhaiapna7 7 หลายเดือนก่อน

      Mujhe saxsenborad bnana hjey

  • @nagendersinghnegi3092
    @nagendersinghnegi3092 2 ปีที่แล้ว +2

    Maine bhi banaya hai online classes ke liye very godd🤗🤗

  • @DMrobotricx
    @DMrobotricx 2 ปีที่แล้ว +17

    Wow brother its very beautiful i am also making awsome things using scrap materials ❤🔥 by the way i love your creative creations..😉😉 love from srilanka as ms robotricx ❤

  •  2 ปีที่แล้ว +6

    First, use a 16A switch for both phase/live and neutral to make sure there is no voltage if the switch is in the off position (shouldn‘t be an issue with these plugs so long the power outlets are properly wired up). And add a fuse rated about half to 3/4 of the current rating of the wires as screwing stranded wire goes against EU/VDE (and to my knowledge also US) electrical wiring code as it can‘t be guaranteed the wire still can handle the rated current.
    But the power strip itself really looks nice.

    • @70newlife
      @70newlife 2 ปีที่แล้ว +1

      India has practically no regulation. All house wiring is done in stranded wires. This was ok 30-40 years back as the biggest load was the refrigerator which was about 350 watts those days. Even washing machines were not prevalent those days. Electricity was mainly used for 6-10 tube lights of 40 watts and 3-5 ceiling fans and a small refrigerator. The biggest common appliance was a 2 kva water heater that too mainly in north India.
      Now we have washing machines , 2-3 split ACs , water heaters in every bath rooms, small 2 kva room heaters at least 2 of them but no attention has been paid to regulation at all. Most electricians are uneducated people without any training or licences. Just some random guy off the street starts hanging around some one who does wiring he becomes an electrician and in a year he is also training others as he branches out in his own. It's the wild west out here.

  • @anuttarjain2293
    @anuttarjain2293 2 ปีที่แล้ว +4

    Bro you can read our mind 😅😅.........I want to make this and today you have upload this video 👏😊❤

  • @s.k.iinvention8448
    @s.k.iinvention8448 2 ปีที่แล้ว +1

    Bhaiya yah bataiye video bahut hi amazing tha mujhe bahut Achcha Laga

  • @tanish0904
    @tanish0904 2 ปีที่แล้ว

    Hay mereko kabse ek extension board banana tha 👍🏻👍🏻👍🏻👍🏻👍🏻💯💯💯💯💯💯
    Thanks a lot for making this

  • @karanmadan1048
    @karanmadan1048 2 ปีที่แล้ว

    Better than cheap extension board,made one many years ago as felt the need.With hardware modular plate and inner wall fitting cover.With self made it cost cheap with wire can be lengthy as much one wants.Also seen one with old wooden wall board.

  • @kranthicreativestudio7685
    @kranthicreativestudio7685 2 ปีที่แล้ว +2

    L is Phase.. N is Nutral
    Phase is always right side of socket from seeing front

  • @jasnekalimi
    @jasnekalimi ปีที่แล้ว

    Super video Thank you for teaching us by making this thing in your very short time.

  • @waseemahmed8129
    @waseemahmed8129 2 ปีที่แล้ว +1

    Finishing 10/10
    Awesome.

  • @G0j0_S4TUR0
    @G0j0_S4TUR0 2 ปีที่แล้ว +5

    Love ❤from Kerala 🥰
    Super🔥🔥

    • @Hitycooking
      @Hitycooking 2 ปีที่แล้ว

      th-cam.com/video/NlT6XqpoeToi/w-d-xo.html3

  • @m_patel96
    @m_patel96 2 ปีที่แล้ว

    Bhai aapki video hum students ke bohot kaam aati hai
    Love from Gujarat

  • @anilshirsat4406
    @anilshirsat4406 2 ปีที่แล้ว +2

    Good idea👍 You can also add screw for opening for repairing 👍

    • @tusharved6856
      @tusharved6856 2 ปีที่แล้ว

      great work but as said can add screws to open for repair great work super

  • @gajabkeexperiment70
    @gajabkeexperiment70 2 ปีที่แล้ว +5

    Amazing board you are great thanks for this making 😅😀☺

    • @Hitycooking
      @Hitycooking 2 ปีที่แล้ว

      th-cam.com/video/NlT6XqpoeTou/w-d-xo.htmlr

  • @maheshjadhav2541
    @maheshjadhav2541 2 ปีที่แล้ว +1

    Baki all over finishing ka work to amazing , Hadsof to you sir...

    • @Hitycooking
      @Hitycooking 2 ปีที่แล้ว

      th-cam.com/video/NlT6XqpoeToi/w-d-xo.html4

  • @narendrasingh9157
    @narendrasingh9157 2 ปีที่แล้ว

    Nice example of creativity

  • @nitinchauhan7634
    @nitinchauhan7634 2 ปีที่แล้ว

    Bahut safai se banaya hai nice work

  • @user-pwd
    @user-pwd 2 ปีที่แล้ว +1

    I love your ninja technique 😍

  • @iambhaskkhar
    @iambhaskkhar 2 ปีที่แล้ว +3

    Great smart work... It looks so premium... All the best... 👌👍🏼

  • @AliGul123-s9x
    @AliGul123-s9x 2 ปีที่แล้ว

    Main aap ka fan hoon Pakistan sy

  • @azizagha2773
    @azizagha2773 2 ปีที่แล้ว

    کمال کا بورڈ بنایا اور میٹریل بھی اعلیٰ قسم کا استعمال کیا ہے یہ بتا سکتا ہے اگر کوئی اس طرح نہیں بنا سکتا ۔تو اسکو یہ بورڈ کس طرح ملیگا اور کتنے کا ملیگا اور کہاں سے ملیگا ۔پلیز ریپلے ضرور کرنا بہت بہت شکریہ ۔۔۔

  • @ferozalamrezvi2908
    @ferozalamrezvi2908 2 ปีที่แล้ว

    Love from Bangladesh

  • @audiolover6096
    @audiolover6096 2 ปีที่แล้ว

    Bhai apka kam ka bohat acha finising he..👍🏼👍🏼👍🏼

  • @bkumar654
    @bkumar654 2 ปีที่แล้ว

    बहुत ही अच्छा बिडियो हैं। मैं आपका फैन हो गया।

  • @omkumar-mp7ux
    @omkumar-mp7ux 2 ปีที่แล้ว

    Good looking thing....jab shot circuit hoga khali metal parts he rah jayega

  • @howtomake0539
    @howtomake0539 2 ปีที่แล้ว +1

    Nice project

  • @likunsandha860
    @likunsandha860 2 ปีที่แล้ว

    Wow exiiend bro very good 👍 ideas

  • @f.rahman3458
    @f.rahman3458 3 หลายเดือนก่อน

    ভাল লাগে আপনার কাজ 😊
    ফরহাদ, বাংলাদেশ থেকে

  • @creator5764
    @creator5764 2 ปีที่แล้ว +1

    Think a heart for technical ninja

  • @technicalinventor5785
    @technicalinventor5785 2 ปีที่แล้ว +1

    Biggest fan bro

  • @Pankoj1743
    @Pankoj1743 2 ปีที่แล้ว

    Wow...your finishing is very good

  • @Shubham_Lohia
    @Shubham_Lohia 2 ปีที่แล้ว

    Bhai company made jaisa look hai wow

  • @shivakumarnaniy
    @shivakumarnaniy 10 หลายเดือนก่อน

    Very use full ,nice making with Detail

  • @kingsingh9367
    @kingsingh9367 2 ปีที่แล้ว +2

    How come neutral and phase wires are connected to switch. Didn't understand that. I believe blue and black wire should be direct and red wire should come through switch.

    • @Baasnhuish
      @Baasnhuish 2 ปีที่แล้ว

      İ thought same.

    • @kingsingh9367
      @kingsingh9367 2 ปีที่แล้ว

      Oh my bad i didnt see properly..the red is coming through switch and the black which is connecting to blue is neutral and then green connected to blue is Earth. Thanks

  • @mayankhansika1737
    @mayankhansika1737 2 ปีที่แล้ว

    Bhai m apki sari video dekhta hu, apki video oro se hatker hoti h.. 👍

  • @K.K04
    @K.K04 2 ปีที่แล้ว +1

    Good morning 👍🏻

  • @grinventions1483
    @grinventions1483 2 ปีที่แล้ว +1

    500k coming soon 🔥🔥🔥

  • @DineshKumar-xn3ys
    @DineshKumar-xn3ys ปีที่แล้ว +1

    Nice video

  • @shinchando7240
    @shinchando7240 2 ปีที่แล้ว +1

    This really looks premium.. 👌👌

  • @sharukhmatekuki5830
    @sharukhmatekuki5830 2 ปีที่แล้ว

    Nice 👍🏻👍🏻 🇮🇳 || Kuki

  • @Anurag_Saxena
    @Anurag_Saxena 2 ปีที่แล้ว +3

    I'll better buy it instead of buying all the equipments you used to make this one. Bonus will be time and efforts saved. So can't watch it to the end.

    • @itsjayravan
      @itsjayravan 3 หลายเดือนก่อน

      Right time west

  • @sandipdhande123
    @sandipdhande123 2 ปีที่แล้ว

    Verrrrrry Nice thank you

  • @CreativeCrew_24
    @CreativeCrew_24 2 ปีที่แล้ว

    hello brother its very wonderful ways to create such an electronic device.but plz tell me the other way for no having hot gun..

  • @creativeshubhamexperiment7049
    @creativeshubhamexperiment7049 2 ปีที่แล้ว +1

    Awesome project
    Nice editing

  • @thelaxit3071
    @thelaxit3071 2 ปีที่แล้ว

    👍👍👍👍👍👍👍👍👍 nice bhai ji ❤️❤️💯

    • @thelaxit3071
      @thelaxit3071 2 ปีที่แล้ว

      @UCzlW3iJ5eCquaKm5XHFi5Mw 👍👍👍

  • @GulshanKumar-oi6eh
    @GulshanKumar-oi6eh 2 ปีที่แล้ว +4

    500 watt automatically inverter banaiye please

  • @shrishmishra2907
    @shrishmishra2907 2 ปีที่แล้ว

    Wow 👏...very nice 👌and very useful 👍and looking 👌too good 👍

  • @ARTJP87
    @ARTJP87 2 ปีที่แล้ว

    This board look is nice

  • @ashab-yo8cq
    @ashab-yo8cq ปีที่แล้ว +1

    Soo good

  • @2v-diy447
    @2v-diy447 2 ปีที่แล้ว

    very good, the video is very good, the power outlet is very convenient, thank you for creating this video

  • @jagabandhujena4656
    @jagabandhujena4656 2 ปีที่แล้ว

    Bhai bahut amazing hai
    Kuchh new things banao
    500k par giveaway karo 🙏❤️❤️

  • @anthwalgaon3bhilangana569
    @anthwalgaon3bhilangana569 2 ปีที่แล้ว +1

    Vary amazing 👍👍👍

  • @Hemantsingh-pc1km
    @Hemantsingh-pc1km 2 ปีที่แล้ว +1

    Nice video i really need it thanks bhaiya☺☺

  • @soylacomadreja5288
    @soylacomadreja5288 2 ปีที่แล้ว

    this video was very useful to me

  • @varapallimohan6723
    @varapallimohan6723 2 ปีที่แล้ว

    Superb and Aap use kiya hai naa black paint oh pvc pipe ke acha rahatha hai ye kya nahin chalegaa..

  • @srinivasbengalurumysuru
    @srinivasbengalurumysuru 2 ปีที่แล้ว

    After it is finished no one can feel it is done from pvc pipe bro😳

  • @Jaishreebalaji5070
    @Jaishreebalaji5070 2 ปีที่แล้ว

    Good work

  • @jcustomdiy3661
    @jcustomdiy3661 2 ปีที่แล้ว

    Great video

  • @buzytechh2780
    @buzytechh2780 2 ปีที่แล้ว

    Very good sir

  • @gwshivamsaini4441
    @gwshivamsaini4441 2 ปีที่แล้ว +1

    Love you bro

  • @DjvinodRemix
    @DjvinodRemix 2 ปีที่แล้ว

    Aapke paas jo hot airgun hau uski buy link dijiye........

  • @athultechz760
    @athultechz760 2 ปีที่แล้ว +1

    Amazing talent

  • @siddarthakadali7719
    @siddarthakadali7719 2 ปีที่แล้ว

    video is super bro. nice editing. please also add a fuse to the extension box and make a video.

  • @svitawakde7722
    @svitawakde7722 2 ปีที่แล้ว +2

    Very nice brother 👍

    • @DMrobotricx
      @DMrobotricx 2 ปีที่แล้ว

      🔥🔥🔥🔥🔥

  • @yjtechnical4700
    @yjtechnical4700 2 ปีที่แล้ว

    Very nice.

  • @Efti__Hasan
    @Efti__Hasan 2 ปีที่แล้ว

    Video is awesome

  • @MyGaffar1990
    @MyGaffar1990 2 ปีที่แล้ว

    Sir hot gun ki jagah kya use kar skte hain.. Pvc pipe ko mold karne ke liye???

  • @g.c.guptagupta1405
    @g.c.guptagupta1405 2 ปีที่แล้ว

    Bahut mast

  • @suniltech5911
    @suniltech5911 2 ปีที่แล้ว

    Nice bro bohot aachha hai

  • @arunvishwakarma7483
    @arunvishwakarma7483 2 ปีที่แล้ว

    Bhaiya must banae ho. Next video star wars bb8 robot pe banao

  • @subhajitgayen710
    @subhajitgayen710 2 ปีที่แล้ว

    Good looking

  • @sowmyamt8670
    @sowmyamt8670 2 ปีที่แล้ว +1

    Bro is it a parallel connection?

  • @srinivasuyyala3473
    @srinivasuyyala3473 ปีที่แล้ว

    Supper Bro Good Jod Brother😎

  • @vijayakumarthangavelan3033
    @vijayakumarthangavelan3033 2 ปีที่แล้ว

    You have used a small piece of PVC pipe very productively

  • @dinoshorts1015
    @dinoshorts1015 2 ปีที่แล้ว

    Waiting for a kind hearted person who actually want to support me from his heart 💗💗♡♡

  • @ashokumale7151
    @ashokumale7151 2 ปีที่แล้ว

    Very good

  • @adv.santhoshthangal1214
    @adv.santhoshthangal1214 2 ปีที่แล้ว

    Nice video. But u connected nutral in the right leg in the board.... Pls cnfm🙏

  • @ramnaslai2980
    @ramnaslai2980 2 ปีที่แล้ว

    Very nice bro

  • @v.g.charuthuddima6366
    @v.g.charuthuddima6366 2 ปีที่แล้ว +1

    Very useful

    • @DMrobotricx
      @DMrobotricx 2 ปีที่แล้ว +1

      🔥🔥🔥🔥

  • @tariqkhan5187
    @tariqkhan5187 7 หลายเดือนก่อน

    Good bro 💯💯👍

  • @SpSr94
    @SpSr94 2 ปีที่แล้ว

    Bhai aise sari cheezein ghar par hi bana loge toh baki becharon ke rozgar ka kya hoga 😄😄

  • @TeslaTism
    @TeslaTism 2 ปีที่แล้ว

    COOOOOOOOOLLLLLL..BRO😉😲😲

  • @aklabmondal1555
    @aklabmondal1555 2 ปีที่แล้ว

    Bhaiya pls Ek Headphone banado pls.in next video ❤.!!!

  • @mojnuchacha
    @mojnuchacha 2 ปีที่แล้ว

    Thanks it will help me a lot

  • @aldrinalejo1810
    @aldrinalejo1810 2 ปีที่แล้ว

    Wow..very creative

  • @harshrajput6074
    @harshrajput6074 2 ปีที่แล้ว

    Avi bhai tusi great

  • @arunkushwaha2017
    @arunkushwaha2017 2 ปีที่แล้ว

    Excellent

  • @richfernandes2810
    @richfernandes2810 2 ปีที่แล้ว

    Superb

  • @vishakhanavrang4034
    @vishakhanavrang4034 2 ปีที่แล้ว +1

    Bhai aaj Diwali phataka jlane wala ligher bnao please 🙏🙏

  • @sanjaysanju7590
    @sanjaysanju7590 2 ปีที่แล้ว

    Osm bro from odisha

  • @Manan_rana
    @Manan_rana 2 ปีที่แล้ว

    Dreaming that I will get a heart from him

  • @sudheekshhegde1900
    @sudheekshhegde1900 ปีที่แล้ว

    Super bro❤❤😊😊

  • @immanuvelsharon197
    @immanuvelsharon197 2 ปีที่แล้ว

    Can you make aquarium light please 🙏🏻🥺 I am your big fan please make your video of

  • @dineshv3116
    @dineshv3116 2 ปีที่แล้ว

    Really super 👍👍👍

  • @ravimohan335
    @ravimohan335 2 ปีที่แล้ว

    Good video bro

  • @paswanravi5888
    @paswanravi5888 2 ปีที่แล้ว

    Simple yet so beautiful 😍

  • @samadhanlohar5741
    @samadhanlohar5741 2 ปีที่แล้ว

    Always.....u r new videos blowing...... 🎉

  • @skydroneindiahobby3239
    @skydroneindiahobby3239 2 ปีที่แล้ว

    Nice ok made a quadcopter using kk2.1.5 dji f450 frame ok