I am learning just how MUCH thought has to go into trying to get the best yield of Lumber from a log. Thanks for the education Nathan. Cheers, Don from South Australia.
When the music starts I get a little melancholy knowing that the video is soon going to be over. Beautiful, Beautiful grain and colors. It's your joy of finding the beauty of the Wood that makes me watch! Thank you for sharing this with us.
Those boards with the cracks are still great boards. I've installed planks in bar and other places where we sanded them down and fill the cracks with colored acrylic and then finished them.
Yesterday I was fortunate enough to get out and visit two favorite antique and craft shops. In one, an artist had made cutting boards from odd shapes, odd sizes, and likely different woods. He suspended them in a closet-sized space in the shop, as beautiful artwork as well as functional in a kitchen. The one that caught and held my attention was the large one with a defect that had been filled with a vibrant blue, instead of the black I've seen in many examples. So, I would say that your current boards would still find lots of uses to many crafty types!
Such a great chunk of wood! You’re a magician when it comes to turning that log the right rotation to get such beautiful cuts. Another great episode from that log with such a great story. Thank you.
I would LOVE to go through your “fire wood “ pile. There’s so much you can do with that. Toss some bow ties down the split, you can run glue down the spilt and run a shop vac on the back side to pull the glue in, clamp it and good as new... so many options.
your welcome i worked at a saw mill in Tennessee Adams vile love wood sawing the grains are just so new in every log am also a wood worker making things all the time so again thank you for you putting then out there
Purty as a fluffy kitten and worth good money in the right market. Knife scales, carving stock, presentation plaques, high end chef's cutting board, etc.
Nathan, there are craftsmen who would buy that cut-off with the wind shake crack. Many people would use it for turning fountain pen barrels or other small projects. Though it may not fetch the price of those 18" beauties, it can be sold for something. ...Cat food cost money!
I agree. I would love to buy some small pieces, especially with the story behind the wood. Get Bruno to start a side business selling your cutoffs. LOL.
IMHO at some point he has probably looked at the handling costs and margins as the sizes get smaller. We all burn wood daily that COULD have been used differently; I know I do. Every time you touch something it costs time and every time you move it it takes time and money. It’s like his comment on selling firewood - it just doesn’t make business sense when you can (my words) make more money on the good stuff and let the little stuff just go.
Just found your channel this evening. I have watched 4 or 5 videos so far. I too was originally from South Knoxville, Tn. My Papaw was a carpenter for the TVA HQ downtown Knoxville. Both parents worked and Mamaw kept me. So in the late 50's early 60's I was in the basement with my Papaw watching and helping when I could. He built desks, furniture and cabinets for certain customers on the side in his basement. He used solid wood back then, no veneers. 2 things I did learn, #1 was moving blade safety and drill press or router safety. I have all of my fingers and toes unlike a Papaw. He lost down to the first knuckle of his pointer finger left hand to a jointer blade. #2 was the beauty of real wood. I helped build things that went to very well to do homes and some were TVA Execs. In the mid 40's his military service was doing carpentry work building Oak Ridge Natl Lab buildings. End of WWII he moved to TVA and worked on Dam Construction. Later he moved to TVA HQ remodeling a building into offices for the EXEC's. He was Supervisor on the 3-11/4-12 shift. I saw you are in NE TN, The Tri Cities. Dad moved us to Texas in 1966. I love my Lonestar State, but Tennessee is love of my heart. Wife loved East Tn so much she wanted to get married there. Married in Sevierville at a Feed Mill & Store downtown. Not there anymore. My best friend in Tenn growing up has a sister who got into the B&B business in Gatlinburg. She and her husband lost some of their properties to the fires. I wish I could have spent more time learning the trade from my grandfather who learned from his father. I would never allow myself to touch that beautiful with a saw, hammer and chisel or drive a screw or nail into it. I am a wood butcher at best. Beautiful work on cutting/slabbing the logs you acquire.
We were married by Jimmy Temple too, such a good man. About 20 years ago he did a renewal of vows for anyone he had married over the years, more than anyone else. We were there and got remarried and pictures. The feed store is now the office's of the Sevier county sheriff's department!
I dont expect a reply or a like/love etc . My dad always talked about logging. My great grandpa was a logger in Fentress Co Tn and my dad spent many a day on the opposite end of a cross cut saw from his grandma. My uncle in Vietnam was an accomplished logger because no one else knew how to cut timber or use a cross cut. Dad would always look at a tree and say there is X amount of board feet. He cut a HUGE poplar one time and it was falling on him and i pushed him out of the way and he punched me because my pushing split the bottom of that log by 3 feet. Thanks for doing this. I was a MArine Recruiter in Kingsport and that area so . Semper Fi
This just amazing. You are definitely knowledgeable. I have seen guys pick up split wood and tie them with a bow inserts and some are made of steel or stainless bows and some pour epoxy and comes out to be amazing counter or table tops. I don’t know much about woods but enjoy watching the process. Thank you for sharing the video.
I always like the bucket of water scene. It's the first glimpse of what's in store for the finished slab. I have in my future, if covid virus allows, a series of live edge walnut planks Danish oil party. I have wetted them down with denatured alcohol in front of a few people, but the first application of Danish oil would be quite a sight, and I have come to realize that it should be a shared event. All bought at auction for nickel on the dollar. Always buy lottery tickets on my birthday, but in reality, those walnut slabs are my fateful winnings.
I have seen best beech bought up by scholl shoe maker. They are not going to worry aboug a shake split. Sell everything, your old log finds are beautiful.
Right at 6:12 Oh ! Oh ! That is pretty. Look at the colours ! If the wind shake is stable,, and where the wind shake is still quarter sawn... Keep it. Cut the pith out,, sure. But the wind shakje is actually pretty.
As a woodworker; don't EVER let me catch you saying waste or fire in reference to a log that beautiful!!! HEH. There is always a way to get around a defect in grain that gorgeous. Keep up the good work young man. You have a dedicated viewer.
Looks like some beautiful worm defects popping in that last board when you poured the water on it. I love seeing the defects in the wood rather than a clear piece of wood but that whole log turned out a variety of beautiful wood.
With the wind shake board, it would be great for knife scales. 3" board would give four sets of scales per linear foot. Walnut scale sell on Ebay for 5$ and up plus shipping. The half inch waste board would work well too.
I was thinking you were going to turn it on its side with that last bit of log. Would have been some nice leg blanks to go with a table/desk top out of one of those wide boards, I think.
There are some board you secret into a private stash area for retirement so you have a secret cash crop of boards for your family so you have gold hidden for that rainy day wish you luck and happy sawing. :)
*Plank has a long wind shake crack. Nathan: "This one's going to the fire wood pile". *Me, an avid scale modeler and occasional woodworker: "Lots of high quality wooden bases in there!".
That is some beautiful wood all of it is wonderful including the first two coats of that log that you did I would keep it all don’t throw any of it into the fire it’s all sellable creative leaders many things you could do with it or somebody can I know I would be able to use them
Cut the slabs so close next to the wind check and save the slabs if not for sale then you can use them on the new buildings!!!!!!!! Great Wood comes many shapes and sizes!!!
Nathan, with all of the beautiful wood you are surrounded by, what is your favorite smell of the Wood? That Black Walnut is gorgeous, but as I recall the smell is kind of harsh, but I may be wrong ( I do it well).
man-o-man how I'd love to make a decked out 'twitchin Bureau with roll top or a grandfather clock case with that gorgeous piece of Gods' creation!!!!!!!
My thinking is run that wind shake out on your jointer, and donate the wood to a school with a wood shop. The kids can make knick knack shelves etc. out of it....just a thought. Please don't burn it.
Pen turners would pay good money. He could saw this burn pile wood into 3/4” x 8” stick (just big enough to fit in the smallest USPS flat rate box and probability be able to sell it for $25/box. I suspect he could do it with other hardwood scrap. Put a section on your website for wood turners? Another revenue stream without a lot of effort.
As always, very entertaining and informative video! Every time you post a video I can’t wait to watch it. Thank you for your time and dedication to your viewers! I have 2 small questions for you 1) When do you think you’ll get to cut that catalpa tree from a few videos ago? I’ve seen them on the river my whole life, non remotely near the size of that one. 2) When sawing, how do you decide how thick to make your cuts? Are your slabs primarily used for tables or counters?
Be sure to follow me on Instagram and Facebook:
Instagram: instagram.com/outofthewoodsforestry/
Facebook: facebook.com/outofthewoodsforestry/
I am learning just how MUCH thought has to go into trying to get the best yield of Lumber from a log. Thanks for the education Nathan. Cheers, Don from South Australia.
Appreciate you watching
I can’t get enough of your channel! I really appreciate you taking the time to teach the art of running a mill. Nice haircut too!
-Ben
thanks Ben, appreciate it,
When the music starts I get a little melancholy knowing that the video is soon going to be over. Beautiful, Beautiful grain and colors.
It's your joy of finding the beauty of the Wood that makes me watch!
Thank you for sharing this with us.
Glad you enjoy it!
Those boards with the cracks are still great boards. I've installed planks in bar and other places where we sanded them down and fill the cracks with colored acrylic and then finished them.
Thanks for the tips!
@@OutoftheWoods0623 your welcome 🙏
Yesterday I was fortunate enough to get out and visit two favorite antique and craft shops. In one, an artist had made cutting boards from odd shapes, odd sizes, and likely different woods. He suspended them in a closet-sized space in the shop, as beautiful artwork as well as functional in a kitchen. The one that caught and held my attention was the large one with a defect that had been filled with a vibrant blue, instead of the black I've seen in many examples. So, I would say that your current boards would still find lots of uses to many crafty types!
yes, lots of potential there, appreciate your support,
Such a great chunk of wood! You’re a magician when it comes to turning that log the right rotation to get such beautiful cuts. Another great episode from that log with such a great story. Thank you.
I would LOVE to go through your “fire wood “ pile. There’s so much you can do with that. Toss some bow ties down the split, you can run glue down the spilt and run a shop vac on the back side to pull the glue in, clamp it and good as new... so many options.
your welcome i worked at a saw mill in Tennessee Adams vile love wood sawing the grains are just so new in every log am also a wood worker making things all the time so again thank you for you putting then out there
Thanks
Purty as a fluffy kitten and worth good money in the right market. Knife scales, carving stock, presentation plaques, high end chef's cutting board, etc.
Nathan, there are craftsmen who would buy that cut-off with the wind shake crack. Many people would use it for turning fountain pen barrels or other small projects. Though it may not fetch the price of those 18" beauties, it can be sold for something. ...Cat food cost money!
I agree. I would love to buy some small pieces, especially with the story behind the wood. Get Bruno to start a side business selling your cutoffs. LOL.
IMHO at some point he has probably looked at the handling costs and margins as the sizes get smaller. We all burn wood daily that COULD have been used differently; I know I do. Every time you touch something it costs time and every time you move it it takes time and money.
It’s like his comment on selling firewood - it just doesn’t make business sense when you can (my words) make more money on the good stuff and let the little stuff just go.
A mill near me, sells small boxes of small stock, mix box 50$
If I could go back a few years and still had my shop ... a visit to your firewood pile would have been an awesome day for me
oh that is beautiful wood. I could look at it all day!!!
Just found your channel this evening. I have watched 4 or 5 videos so far. I too was originally from South Knoxville, Tn. My Papaw was a carpenter for the TVA HQ downtown Knoxville. Both parents worked and Mamaw kept me. So in the late 50's early 60's I was in the basement with my Papaw watching and helping when I could. He built desks, furniture and cabinets for certain customers on the side in his basement. He used solid wood back then, no veneers. 2 things I did learn, #1 was moving blade safety and drill press or router safety. I have all of my fingers and toes unlike a Papaw. He lost down to the first knuckle of his pointer finger left hand to a jointer blade. #2 was the beauty of real wood. I helped build things that went to very well to do homes and some were TVA Execs. In the mid 40's his military service was doing carpentry work building Oak Ridge Natl Lab buildings. End of WWII he moved to TVA and worked on Dam Construction. Later he moved to TVA HQ remodeling a building into offices for the EXEC's. He was Supervisor on the 3-11/4-12 shift. I saw you are in NE TN, The Tri Cities. Dad moved us to Texas in 1966. I love my Lonestar State, but Tennessee is love of my heart. Wife loved East Tn so much she wanted to get married there. Married in Sevierville at a Feed Mill & Store downtown. Not there anymore. My best friend in Tenn growing up has a sister who got into the B&B business in Gatlinburg. She and her husband lost some of their properties to the fires. I wish I could have spent more time learning the trade from my grandfather who learned from his father. I would never allow myself to touch that beautiful with a saw, hammer and chisel or drive a screw or nail into it. I am a wood butcher at best. Beautiful work on cutting/slabbing the logs you acquire.
We were married by Jimmy Temple too, such a good man. About 20 years ago he did a renewal of vows for anyone he had married over the years, more than anyone else. We were there and got remarried and pictures. The feed store is now the office's of the Sevier county sheriff's department!
@@brucebelitz3451 i saw that in photos.
We went back 1 year later. Yes, he was a fine man. He knew my distant relatives.
What great cuts from what didn't look so good for an instant. You're amazing Nathan. Have a great weekend! Thank you for this.
thanks Rich you too,
I dont expect a reply or a like/love etc . My dad always talked about logging. My great grandpa was a logger in Fentress Co Tn and my dad spent many a day on the opposite end of a cross cut saw from his grandma. My uncle in Vietnam was an accomplished logger because no one else knew how to cut timber or use a cross cut. Dad would always look at a tree and say there is X amount of board feet. He cut a HUGE poplar one time and it was falling on him and i pushed him out of the way and he punched me because my pushing split the bottom of that log by 3 feet.
Thanks for doing this. I was a MArine Recruiter in Kingsport and that area so . Semper Fi
Walnut never gets old!
no sir, all day
You are allowed to say "never" when referring to the appeal of walnut.
Wow! Very entertaining watching you cut up timbers and the kinds of grain these logs have, it beautiful...thanks!
Nathan - you were born to this. Such artistry!
Thanks 👍👍
I wish I lived a little closer!! I would love to plunder through your scrap pile!!
This just amazing. You are definitely knowledgeable. I have seen guys pick up split wood and tie them with a bow inserts and some are made of steel or stainless bows and some pour epoxy and comes out to be amazing counter or table tops. I don’t know much about woods but enjoy watching the process. Thank you for sharing the video.
I always like the bucket of water scene. It's the first glimpse of what's in store for the finished slab. I have in my future, if covid virus allows, a series of live edge walnut planks Danish oil party. I have wetted them down with denatured alcohol in front of a few people, but the first application of Danish oil would be quite a sight, and I have come to realize that it should be a shared event. All bought at auction for nickel on the dollar. Always buy lottery tickets on my birthday, but in reality, those walnut slabs are my fateful winnings.
Beautiful wood. Now a days folks are obsessed with weird grain and stuff we used to consider “defects”
It’s cool to see such “perfect” wood
Great point!
Walnut is so awesome to work with. Even using all hand tools. It’s just an all around perfect species of hardwood! Enjoy your videos Nathan!
What gorgeous wood! The best things in life are worth waiting for.
My my what an exquisite looking walnut boards....Thanks very much my friend..!
Glad you like them!
In todays world of epoxy, I would think those "scrap" boards would make an incredible table or desk. Just beautiful grain in that board.
11 months into covid and I am staring at wood 1500 miles away.
One of the most beautiful hardwoods in North America!
agreed
I have seen best beech bought up by scholl shoe maker. They are not going to worry aboug a shake split. Sell everything, your old log finds are beautiful.
We had narrow boards in my school wood shop, we learned how to glue them together to make wider stock.
Right at 6:12 Oh ! Oh ! That is pretty. Look at the colours ! If the wind shake is stable,, and where the wind shake is still quarter sawn... Keep it. Cut the pith out,, sure. But the wind shakje is actually pretty.
Wow I love that grain pattern what a beautiful slab of wood
I was at the grocery store shopping, before I left I found six black walnut pallets in the dumpster........ I was so happy 😂😊☺️
You're crazy that's the best part of that plank gouge it out and put acrylic in there it looked beautiful
Man Nathan that Black Gold just popped! The variety of so many different trees in TN vs what I have here in S.Texas is quite different!!!!
This wood is Beautiful! I'd say it was a prize in spite of the check! Thanks Kindly Nathan! Blessings! DaveyJO in Pa.
Thank you kindly
As a woodworker; don't EVER let me catch you saying waste or fire in reference to a log that beautiful!!! HEH. There is always a way to get around a defect in grain that gorgeous.
Keep up the good work young man. You have a dedicated viewer.
Great point!
Looks like some beautiful worm defects popping in that last board when you poured the water on it. I love seeing the defects in the wood rather than a clear piece of wood but that whole log turned out a variety of beautiful wood.
Thanks 👍
That last board was beautiful even with the little bit of sap wood. Nice job Nathan.
Thanks buddy
So glad you shared these videos!!!
With the wind shake board, it would be great for knife scales. 3" board would give four sets of scales per linear foot. Walnut scale sell on Ebay for 5$ and up plus shipping. The half inch waste board would work well too.
Man! That's a great idea!!! IDK if it would be profitable, but can you imagine the knife handles that would be produced......
Great video as always Nathan. Love the music you choose, so relaxing. Can't wait to start sawmilling on my property in Michigan!
I was thinking you were going to turn it on its side with that last bit of log. Would have been some nice leg blanks to go with a table/desk top out of one of those wide boards, I think.
You have an excellent eye as a sawyer and in video production.
Thanks Richard.
Beautiful.
Narrower boards are great, if they hold up for trim and picture frames.
Worked out well. Good job Nathan
So glad I found a guy with his own mill who knows wood
Gorgeous wood.
Thank you! Cheers!
There are some board you secret into a private stash area for retirement so you have a secret cash crop of boards for your family so you have gold hidden for that rainy day wish you luck and happy sawing. :)
I get worried about a fire with all the sawdust and the gas cans nearby. Hope you clean up the dust often. Love your work.
Such beautiful wood
Thank you! Cheers!
Man that log made some beautiful stuff. Appreciate your knowledge
*Plank has a long wind shake crack. Nathan: "This one's going to the fire wood pile".
*Me, an avid scale modeler and occasional woodworker: "Lots of high quality wooden bases in there!".
wind shake or not, that was one heck of a beautiful log and the wood you did get out of it was fantastic. Some loss, but still one heck of a log.
thanks Mark,
Beautiful looking wood
Thank you! Cheers!
That is some beautiful wood all of it is wonderful including the first two coats of that log that you did I would keep it all don’t throw any of it into the fire it’s all sellable creative leaders many things you could do with it or somebody can I know I would be able to use them
I just realized how much you sound like ProjectFarm haha! Great vids, own small sawmill myself and I love watching your videos and learning tips!
Thanks 👍👍
jeez some that clear section make some nice acoustic guitar let me tell you, solid bookend back, solid sides
Appreciate it!
Really interesting to see how you tackled that👍
Thanks 👍
Great job dealing with natural problems with some beautiful timber!
thanks for watching!
I recently found some beautiful green heart exotic wood pallets.
You can build some beautiful projects using exotic wood from pallets if you know anything about wood working.
You can always grind out the cracks and put epoxy in it looks beautiful.
watching this is so soothing!
That’s awesome. Love the camera shots when putting water on it
Thanks 👍
Nice work figuring that out 🙂. Got some beautiful boards.
Thank you! Cheers!
Cut the slabs so close next to the wind check and save the slabs if not for sale then you can use them on the new buildings!!!!!!!! Great Wood comes many shapes and sizes!!!
Your waste would be my GOLD
Wish I lived near to you.
I could really enjoy myself with that waste.
Great Log 👍🏻
Thanks 👍
I can think of no better use for those plaks but stairs and floor planking, but I don't know..
Seems like those castoffs would make gun stocks or grips. Can I come over to go thru your burn pile?😀
"Wood such a blessing to humanity" David Lynch.
Was there the year before and after the fires. Awesome place. Would love something made from the fire wood.
That would be cool!
Great job. Awesome wood. You didn't have much to burn but I'd love to visit your burn pile.
Thx
Beautiful!
Thank you! Cheers!
I will never ever buy or use a saw mill to make my own lumber, yet I religiously watch these videos, and marvel at the lumber you produce. Weird
Great video! Good stuff to know!
Wow nice log
Thanks 👍
Got to love that black walnut
appreciate your analysis of tree issues.
Thanks for watching 👍
You really got folks boxers in a bundle taking about burning that walnut. ; )
lol, true,
Beautiful wood!
Thank you! Cheers!
WOW brother thats pure ole dee prudy. Lovely walnut!!!!
i like watching these videos.
thanks for watching
How can you tell wind shake from water check?
Greeneville Tn. watching Amazing lumber !!!
Hey Mike, pretty close to us,
I have been watching you for a good while now. All of that lumber makes my mouth water. lol
Nathan, with all of the beautiful wood you are surrounded by, what is your favorite smell of the Wood?
That Black Walnut is gorgeous, but as I recall the smell is kind of harsh, but I may be wrong ( I do it well).
Thanks for sharing, interesting work. Full View and Like
Some special stuff.👍
thanks for watching!
man-o-man how I'd love to make a decked out 'twitchin Bureau with roll top or a grandfather clock case with that gorgeous piece of Gods' creation!!!!!!!
My thinking is run that wind shake out on your jointer, and donate the wood to a school with a wood shop. The kids can make knick knack shelves etc. out of it....just a thought. Please don't burn it.
i was thinking the same thing but with local craftsfolks, would be a way to introduce new people to your mill and get future orders.
Pen turners would pay good money. He could saw this burn pile wood into 3/4” x 8” stick (just big enough to fit in the smallest USPS flat rate box and probability be able to sell it for $25/box. I suspect he could do it with other hardwood scrap.
Put a section on your website for wood turners? Another revenue stream without a lot of effort.
@@judd_s5643 I would look at a box 👍👍👍👍
Ralph Freeman
It’s sacrilege the stuff deemed not good 😱🏴
That's one beautiful lawg.
I see the black walnut is drying nicely in the background.
Love those faults he talks about, they're great design opportunities, especially with epoxy with color.
No not the burn pile! Man, if you weren't a thousand miles away I'd take any walnut you've got in the pile for butcher block tops.
Or turn on a lathe
As always, very entertaining and informative video! Every time you post a video I can’t wait to watch it. Thank you for your time and dedication to your viewers! I have 2 small questions for you 1) When do you think you’ll get to cut that catalpa tree from a few videos ago? I’ve seen them on the river my whole life, non remotely near the size of that one. 2) When sawing, how do you decide how thick to make your cuts? Are your slabs primarily used for tables or counters?
Could you have turned that ring shank up on end and cut 12/4 or 16/4 rift to make some matching legs for those slabs?
I've noticed that chocolate syrup and ice cream kind of looks like Walnut. Coincidence? I think not. 😎