Yes, readymade with smaller display will work perfectly, but if you would like to make more like commercial lab bench supply, it is very useful in that.
For this to work, the displays must be a common anode or cathode, depending on the configuration of your board. Some voltmeter boards are based on stm8s103. Exist custom firmware to change the values, you can change the resistors on the PCB to change range of measure of volts and amps.
I have a Computer UPS and I have Connected 150Ah Battery to it Made some modifications... Now when I connect UPS to AC supply It charges Battery and I don't want UPS to charge battery I have solar For it... I only need UPS to Take load from Battery and Don't Charge it..... How can I do it???
@@CreativeTechos Like Whenever Ac supply is Available It should Bypass Direct to Load but should not Charge battery ... When AC Not available It should run From Battery...
Great idea 👍
thank you dude ❤🙏
after 1 year finally find your nice work that i need it❤🙏
i wished you'd explain it.any way great for me 🙏
Thanks for watching my friend 🙂
@@CreativeTechos thanx to yo bro appreciate you ❤❤
This project is very good!
Thanks for watching 🙂
Good work thanks
Thanks for watching my friend 🙂
SUPER ! As tu une référence des nouveaux afficheurs ?
GREAT ! Do you have a reference of the new displays?
👍👍👍👍👍
Which type of display, please mention
@@CreativeTechos You, what did you use? Thank you
It was 3 Digit 0.56 inch 7 segment display
@@CreativeTechos Merci beaucoup ! 👍👍👍👍👍👍
Thanks for the Superb Video, Please send the link of small display
Do want link of small segment display or bigger?
hello brother i have that volt meter with 9 pin out . how can i connect it to that bigger display can you make a video please
Super 🙏🙏🙏
Thanks for watching 🙂
Bom dia parabens
Thanks for watching 🙂
Vere nice👏👍💝
Thanks for watching 🙂
Nice project beothers🤝👍 6:11
Thanks for watching my friend 🙂
👍👍
Thanks for watching 🙂
1 question common cathod or common anode led ?
In this volt meter, it was common anode
I will prefer smaller one more easy, no soldering and wasting time
Yes, readymade with smaller display will work perfectly, but if you would like to make more like commercial lab bench supply, it is very useful in that.
Display pin ?
Common anod Or cathod??
Common cathode
@@CreativeTechos thank you bro❤
My pleasure, Thanks for watching 🙂
@@CreativeTechos kws-dc121 plase?
@@CreativeTechos Par prispevkov vyssie pises, ze spolocna je anoda, teraz pises, ze spolocna je catoda. Tak kde je pravda?
What is function of stepdown module, can i skip this this item
For this to work, the displays must be a common anode or cathode, depending on the configuration of your board.
Some voltmeter boards are based on stm8s103. Exist custom firmware to change the values, you can change the resistors on the PCB to change range of measure of volts and amps.
What is number of ic you used pls
Is k baapp ko b ic ka pata nhi ho ha
I have a Computer UPS and I have Connected 150Ah Battery to it Made some modifications... Now when I connect UPS to AC supply It charges Battery and I don't want UPS to charge battery I have solar For it... I only need UPS to Take load from Battery and Don't Charge it..... How can I do it???
You can simply avoid to plug in to AC, but if for any purpose you want to plug in ac than transformer or circuit board needs modification.
@@CreativeTechos Like Whenever Ac supply is Available It should Bypass Direct to Load but should not Charge battery ... When AC Not available It should run From Battery...
Ic name plz
Ra hai lmade suiurd