Hi we trying to do this rubber insert on different application. would you be able to give some idea where can i get the plastic to keep the rubber in place and also the plastic end cap for insert axle (black part shown on the video)
Very Good!! A question: how long are the rubber bars and what material are they made of? Polyurethane? Rubber? Elastomer? And what is the diameter of each of them? With how many kilos of pressure does the hydraulic press work? Thank you very much for your kind attention. Greetings
I have made my own independent suspension units with 50mm box, 30mm square section and 18mm 70 shore rubber all pressed in in a home made press, works well, I used silicon spray as a lubricant.
Hi Tony, thank you for sharing as I have been planning to do the same. You mean 18mm diameter for the four rubbers - one per corner of the 30mm square, right? How do you keep them steady or not being pushed while the square thingy is being pressed in?
megérdemelt volna ez a klipp egy gyártástechnológiailag és videozásban is jártas szakember irányitását a könnyebb felismerhetőséghez.-Pontositva a cimet: itt a gumitorzios tengelyről van szó.
And then after a few years the rubber dry rots and the swingarm rips off. Happened to me a few days ago. Totalled my trailer. Not a very good design if you ask me.
Just what i was looking for! Thanks for posting!!
How much psi is needed to push the pin between the rubbers
foglalkoztok javitasal is, nekem az egyik felen elszakadt a gumi es nagyon meggyengult tole a rugozas
Hi we trying to do this rubber insert on different application. would you be able to give some idea where can i get the plastic to keep the rubber in place and also the plastic end cap for insert axle (black part shown on the video)
Very Good!! A question: how long are the rubber bars and what material are they made of? Polyurethane? Rubber? Elastomer? And what is the diameter of each of them? With how many kilos of pressure does the hydraulic press work? Thank you very much for your kind attention. Greetings
Have a press for sale
jak te gumy się trzymają, że nie zostają wciśnięte do korpusu razem z kwadratem wahacza?
Mi akadàlyozza meg a kicsúszását?
What kind of glue did you use?
thats
grease
Hallo, wo befindet sich dieser Workshop? Ich muss meinen Anhänger reparieren
how much PSI is needed to press the axle in the tube?
Macht ihr auch Instandsetzungen also Tausch der Gummischnüre? Wenn ja wo?
So the only thing holding the sprung part in the axle tube is friction on the rubber sections?
Andrew Wilson p
Prima
Ha cserélni kell akkor hogy lehet ki szedni a régit?
hali, sikerult kicsereljel ilyen gumikar?
Master AleAlehando, Camera L Gaga
I have made my own independent suspension units with 50mm box, 30mm square section and 18mm 70 shore rubber all pressed in in a home made press, works well, I used silicon spray as a lubricant.
Hi Tony, thank you for sharing as I have been planning to do the same. You mean 18mm diameter for the four rubbers - one per corner of the 30mm square, right? How do you keep them steady or not being pushed while the square thingy is being pressed in?
@@alb.patrickke5243 Send me a mail at tchearnley@hotmail.com and I will show you all.
megérdemelt volna ez a klipp egy gyártástechnológiailag és videozásban is jártas szakember irányitását a könnyebb felismerhetőséghez.-Pontositva a cimet: itt a gumitorzios tengelyről van szó.
How N press?
vă rog mă puteti ajuta cu un ne de telefon să fac o programare
Habe solch eine Achspresse zu verkaufen - i have such a axle press for sale - PN
Класс. А смазывают квадрат мыльной водой, что бы хорошо заходило в резинки.
And then after a few years the rubber dry rots and the swingarm rips off. Happened to me a few days ago. Totalled my trailer. Not a very good design if you ask me.
mine's slightly protruding on one side; probably impossible to push back
Perfeito
Oq impede de não sai de dentro
ПИПЕЦ! ЭТО ЧЁ КАМЕННЫЙ ВЕК? РАЗМЕРЫ РУЛЕТКАМИ АЛЕНИ МЕРЯЮТ,ЛИКАЛО НЕТ ГОТОВОГО ЧТО ЛИ ,ЭТО ЖЕ ЗАВОД. УЖАС!!!
INSPECTOR ko0
i89