How to Replace Front Wheel Hub 2003-2012 Chevy Colorado
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2003-2012 Chevy Colorado.
This process should be similar on the following vehicles:
2004 Chevrolet Colorado
2005 Chevrolet Colorado
2006 Chevrolet Colorado
2007 Chevrolet Colorado
2008 Chevrolet Colorado
2009 Chevrolet Colorado
2010 Chevrolet Colorado
2011 Chevrolet Colorado
2012 Chevrolet Colorado
Tools you will need:
• Impact Screwdriver 1aau.to/oQ/1AXA...
• Pry Bar 1aau.to/ohB/1AX...
• 13mm Socket 1aau.to/oBd/1AX...
• 15mm Socket 1aau.to/oBd/1AX...
• 17mm Socket 1aau.to/oBd/1AX...
• 19mm Socket 1aau.to/om9/1AX...
• 21mm Socket 1aau.to/om9/1AX...
• 7mm Socket 1aau.to/owY/1AX...
• Brake Caliper Hanger 1aau.to/oaZ/1AX...
• Dead Blow Hammer 1aau.to/ohR/1AX...
• Bent Nose Pliers
• Pliers
• 1/2 Inch Breaker Bar 1aau.to/ocI/1AX...
• Ratchet 1aau.to/oDK/1AX...
• Socket Extensions 1aau.to/oBd/1AX...
• Torque Wrench 1aau.to/orA/1AX...
• Large C-Clamp
• Wire Brush 1aau.to/ocV/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Colorado 2004-2012: • Chevy Colorado 2004-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
This is what a mechanic “how to” video should be. I haven’t even replaced my hub assembly but liked the video for the simple reason that this mechanic is getting down to business. No corny jokes in between breaking bolts. No life story to invest in to get the info your actually wanting. If I could like it twice I would. Thank you.
The torque spec you mentioned for the Bud to Rotor (disc) was SNUG and then 15 lbs... factory spec on 2005 and earlier is 88 ft lbs. 2006 thru 2008 is step 1 snug, step 2 is 15 lbs, THEN STEP 3 final is 81 ft pounds...as for 2009 to 2012 its snug then 89 ft pounds.... I think you missed a step in the video. OTHERWISE fantastic very detailed video. keep up the good work
What about a 4 wheel drive?
I got all the way down to removing the hub assembly and had to abandon this project. I could not for the life of me free that hub assembly from the truck. I tried prenetraiting oil, hammering on the rotor, pry bar, no luck.
Any suggestions?
This was the absolute best how to do video I've ever watched! Saved me so much time
Very helpful video. For a 4WD vehicle recommend this link - ABS Fault C0040 - How to replace Colorado/Canyon Speed Sensor & Hub Assembly!. Need to remove knuckle to get axle out of the way to thread ABS wire through.
Would this replacement work the same with 4WD,?
Wouldn't dare open the brake system unless I was replacing the caliper, sorry.
Thank you for the video, I haven't even changed mine but this was almost as good as a Bob Ross video
Best and complete video....THANKS!!!!
Great walk through this will help alot thanks
This made this job seem so easy.
But there is a cv axle that goes through the middle of the hub. How do you get it on over that?
Great video I like it
Great video. Now know what my paid mechanic had to do.
Best how to videos, great job and thanks.
Will 4 wheel drive work on 2 wheel drive
Where can I get a new dust shield for this? I can’t find any online
Excellent video
Nice video... good job.
Does anyone know the part number for the four hub bolts?
Thank you kindly!
What is a 'cookie cleaner'?
2012 chev Colorado four wheel drive removal replace
Full of rust caused by salt ?
Thank You.
15 libras poco
My abs is not attached to the assembly
I have a 2010 chevy colorado 2wd
@@randellbrown7072 I believe the ABS is only on the driver front
I have a 2011 and the abs is not attached to the bearing
They let any ding dong design and engineer a car. Who wants to pull a hub assembly just to change a brake rotor.