My 4.5 gallon IMS tank was just delivered last week. Thanks for posting this. Since I haven't installed it yet I'll use your tips for preventative measures.
Thanks for all great info videos ! Could you do a “what to check before buying a used KTM/ Husky video ? the community could greatly benefit from a video with a few pointers on what to look over before purchasing a used machine
I have the same problems. In addition, the radiator pressed a hole in my tank. The ims tank is of very poor quality and is much too thin on the inside. I have now ordered the acerbis tank
@@TACOMOTOCO Besides radiator protection, would you advise radiator guards to help hold the IMS tank away from the Cylinder head? If so, which radiator guards as I'll place an order.
My 4.5 gallon IMS tank was just delivered last week.
Thanks for posting this. Since I haven't installed it yet I'll use your tips for preventative measures.
Thanks for all great info videos !
Could you do a “what to check before buying a used KTM/ Husky video ?
the community could greatly benefit from a video with a few pointers on what to look over before purchasing a used machine
That’s a great idea 👌🏽
😮 I’ll complete this on my return from my trip in a few weeks. Ughhh 🤦🏼♂️
does the ims tank/valve cover rub also happen on 20-23 fe501
Nice. The little things mean a lot.
I have the same problems. In addition, the radiator pressed a hole in my tank. The ims tank is of very poor quality and is much too thin on the inside. I have now ordered the acerbis tank
I'm confused. Was the tank rub on the head due to the radiator guards used on that bike or due to poor clearances by IMS?
Rub is from the inner wing bulkhead, Address both things to fully resolve
@@TACOMOTOCO Besides radiator protection, would you advise radiator guards to help hold the IMS tank away from the Cylinder head? If so, which radiator guards as I'll place an order.
do you guys get noisy chain slap on the new 500s?
Yesssss. So obnoxious!
What radiator guards are they?
Bullet proof