Hes doing it his way a wood seat just think if ford came up with that Idea we all would have a sore butt all that wood would be up our butts😂😂😂😂😂😂😂 😂😂😂 😂😂😂😂😂😂😂😂😂😂😂
@@stevemazz3121 Doesn't make a difference when it was recorded. The car should have never left the work shop before the back seat was lowered. THEY NEW IT HAD TO BE DONE. Chad got to excited about his next project with the box car & that large engine.
Our tastes are not the same they simply love the yellow colour for panels... personally I've never seen a yellow door panels...bit they love it and its their car!
This must have been previously recorded because that's the Milwaukee grinder he smashed and trashed. Yep, Nathan's still working on the hood [ Bonnet for you Ausies]
@lukeandjilljelsma654 NO! I am letting them know that maybe the shows name. When Chad finished fabricating, that's virtually thevend of his contributions for the build. Aftet that it's waiting for Nate to become avsilable.
Floyd knows interiors very well. I can tell this is a previously recorded video. First off all the windows are not in the 50 yet , then chad is using the grinder he destroyed a while back.
Everyone is entitled to their own opinion. That being said the metal work on the 50 was well done. But who paints their car Brown and adds plastic stick on chrome?
Hi everyone. Chad everyone has a way they would do it but you do your way for you are the one who has to be satisfied with it. God bless and have a blessed evening and night
That back seat should have been completed before he came. Chad will always act like a young boy. He's mind is on his next fabricating job & forgets about thing he doesn't enjoy doing. THAT'S one BAD lesson he's teaching his young followers. ****Jolene, for the 1st time I'm going have to share 1/2 the blame on you. You have start asserting yourself and be primarily THE BOSS of this so called business. WHEN YOU RUN A BUSINESS NOT EVERYTHING IS FUN. Chad whats everything to be fun.
I love the look of the car and the paint. I’m still not loving the Pea Green interior. White, Cream, Primrose Yellow, or even a Light Tan, would look better IMHO.
I don’t blame them because it’s the way I would do it, l would think that they often keep shooting and shoot a couple of videos a day. They have a life, this one is an old video but they may have had it ready for an emergency in case they couldn’t get one done
I like it when the clips jump about from projects as it confuses the haters, i mean they sit their asses down to slate Chad on anything he does nightly so they feel good in themselves & he is doing the learning on upholstery........that's women's work sewing & stuff even if you use a grinder, then they spend the evening trying to workout grindergate like its a conspiracy.
Chad reminds me of another builder who works similar his name is Ian I seen him use a piece of cardboard to determine the shape of a car roof by holding it on its horizontal plane and bending over lit.
You have a real professional there i know he's going to take the covers back to the shop recut all sew it all together come back put the padding back on put the covers back on pin it up you have your new cover what color we don't know i like to see how he cuts that back seat to fit the front take the back of the bottom repeat all is he doing the sides the ruff cut to fit sow in clip to hold the rods that goes a cross left to right a thin 8 inch hope he doing the sides hope he does it the right way with the padding and clips either use a red or tan material to match the wheels that green had to go now lets see who is going to talk bad about my comment. That's why he says leave a comments
Yes, I think it is the best choice to rebuild the seat with a wooden structure. 😎👍 (Yes, I noticed it too. I assume this video was recorded a few weeks ago and was planned to be released later. There are a lot of different things and work not done yet)
Years ago I quit buying custom car magazines because every feature seemed to have popular color scemes. I personally am thinking a complete cover yellow pinstripe would win a prize.
I thought a car like that should have been black , a throwback to the mobster days. That said brown is different, the mustard green goes with the brown but still at the end of the day when I look at it I still think it’s a cool car that I’d own.
While you wait on material. Work on something else that is using time wisely. I love your show and don't worry about all the complaining just keep doing your way my friendsThank you Jolene, nate, Doug and fina. ❤❤
Hog piercings is what we would call them today. LOL Applied to the top forward location on hog snout, discourages hogs from rooting in the soil, uprooting fence, etc. I was tasked with applying these rings to my herd. Just an old farm boy.
And this is a old vedeos no window in car no vent windows and you can see how much the seat needs to go back but what do i know any one know what nates doing lol lol
The hump in the springs can be flatend buy using twine and competing the higher springs making them flat and still keeping the comfort then support the springs with your board frame
See if he keep that angel front two the side to back cut the back a little shorter it would work but now he's going to make a seat out of wood what a waste one more f---- up oh well what's new my opinion who cares they are going to talk bad about my comment. I have the freedom of speech just like everyone one else. I guess Jolene dog going to have a sore butt sitting in the back oh well if ford wanted a wooden seat in th he back they would have done it But chad has to do it his lazy way
Let Floyd do all the interior to make the car great
I've never seen an upholstery grinder before..
It's nice seeing the 50 but still not sold on the colour for the interior but it's not my car...
Nice way to destroy a seat!
Yes we need a would seat in ford should have done that lol lol lol lol 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂can't stop
Hes doing it his way a wood seat just think if ford came up with that Idea we all would have a sore butt all that wood would be up our butts😂😂😂😂😂😂😂 😂😂😂 😂😂😂😂😂😂😂😂😂😂😂
Stop being a whiner!
Chad, a good pair of side cutters makes short work of those upholstery rings. Quicker and less dangerous than a grinder.
I can see him keeping a grinder at the dinner table
Grinder works great 👍🏼
Hog rings were put in hogs noses to keep them from rooting around and causing property damage .
Such a nicely executed exterior - glad to see it is getting a quality interior to match. 👍
Fina just goes with the flow. Great dog.
All l can say is Oh my God
How old is this video, Milwaukee grinder back from the dead!
He did say something about watching yesterday's video of He and Jolene working on the door panel... how long ago was that?
Lol lol😂😂😂😂😂😂😂😂😂
It’s an old video, the vette is not at the door
@@stevemazz3121 Doesn't make a difference when it was recorded. The car should have never left the work shop before the back seat was lowered. THEY NEW IT HAD TO BE DONE. Chad got to excited about his next project with the box car & that large engine.
Milwaukee grinders last forever. You just have to change out the armature brushes and the bushings when they wear out.
Floyd's a good old boy down to earth, 😮
Thank goodness the nice weather is here.
Yay! Floyd's back can't wait too see what happens 👍Go for it Team Hiltz 👁🐅👌
A beautiful car! Great work.
Such a bad idea. Grinder sparks around upholstery. Fires more often start when you forget about it .
Our tastes are not the same they simply love the yellow colour for panels... personally I've never seen a yellow door panels...bit they love it and its their car!
Hate those yellow door panels ......awful!
Looks like vomit
I GUESS DOOR PANELS WILL MATCH THE SEATS HOPE SO I PERFER BLACK ALL BLACK LOL
You HATE!!!!!!!the door panels ,HATE??????,
If your vomit is that bright yellow...then you have serious issues...@@DavidSmith-zv7oq
i like them
Hey Chad, Jolene, Nate, Floyd, & Fina, beautiful day everyone! Time for the Shoe Box to get an interior! I will be back tomorrow to see more!
This must have been previously recorded because that's the Milwaukee grinder he smashed and trashed. Yep, Nathan's still working on the hood [ Bonnet for you Ausies]
So glad u noticed, good boy🤪
@@peterjohnson9077 Is that sarcasm?
Warranty replacement ! 😉
Even if it 3:03 was pre-recorded, the seat should have been fixed before it went in that building
@lukeandjilljelsma654 NO! I am letting them know that maybe the shows name. When Chad finished fabricating, that's virtually thevend of his contributions for the build. Aftet that it's waiting for Nate to become avsilable.
Is this a dated video? Because Chad is using the Milwaukee grinder which he threw away a couple weeks ago. We pay attention. lol
And ?
Yes and old vedeos no windows
Spoken like a true "follower"
Glad the interior is getting done on the 50 ford, gonna look great 👍
Fina knows how to steal the show! Such a sweetheart. Ontario fan
Floyd knows interiors very well. I can tell this is a previously recorded video. First off all the windows are not in the 50 yet , then chad is using the grinder he destroyed a while back.
You must be a "follower"
That foam looks in good shape, I would add another foam and glue them together to make the seat more comfortable.
Everyone is entitled to their own opinion. That being said the metal work on the 50 was well done. But who paints their car Brown and adds plastic stick on chrome?
Buy him custom made chrome, probably only set you back 5-10k.
Chad
Don't think he will be able to get it certified with the gas tank in the trunk but the old thing looks good.
@@lynndonsonier2745 huh?
@joeblow5381 has a plastic Jerry can in the trunk for a gas tank.
Sounds good cutting the front lick you say but u still got two cut the back some two move the seat back so you can get in and seat right
Good job Chad has a grinder handy for the hog rings. His "Swiss Army Knife" if you know what I'm saying!!
Ivory and rootbeer brown would have looked great for interior
Good old Bad Chad. Where would he be without a grinder. But he gets the job done.
The red grinder returns
Probably a replacement for a defective unit!😇
@@Marlin-56 returned old one this is new
Thats because the old one exploded!!! 😂
Make back seats more like bucket seats with i console n middle
Definitely needs a counselor! so does his "followers"
Hi everyone. Chad everyone has a way they would do it but you do your way for you are the one who has to be satisfied with it. God bless and have a blessed evening and night
joeline....give the oldlady a seat plz:)
In America we have to take the car to the upholstery shop to get work done
That back seat should have been completed before he came. Chad will always act like a young boy. He's mind is on his next fabricating job & forgets about thing he doesn't enjoy doing. THAT'S one BAD lesson he's teaching his young followers. ****Jolene, for the 1st time I'm going have to share 1/2 the blame on you. You have start asserting yourself and be primarily THE BOSS of this so called business. WHEN YOU RUN A BUSINESS NOT EVERYTHING IS FUN. Chad whats everything to be fun.
Fina is checking out the back seat and hoping Floyd puts a blanket for comfort
This is an old video, there are no windows in this car. And they are not showing Nate working on the Ford and the Red Grinder that he used broke
In one day, they could video a week's worth of stuff. Then have a 6 day's of playing with Jolene ❤
Why bicker about it? Everyone saying it’s old but you’ve never watched it, who cares if it was pre filmed stop picking at everything on the internet 🛜
I love the look of the car and the paint. I’m still not loving the Pea Green interior. White, Cream, Primrose Yellow, or even a Light Tan, would look better IMHO.
❤❤ HEY CHAD, MAKE A VIDEO OF FIXING THE FENDER ON YOUR TRAILER THAT THEM GUYS DENIED BACKING INTO!! HAHA ❤❤
We put 74 newport seats in my Uncles 50 ford . Bottom just the right size but the back we had to narrow a little but it worked.
That seat modification looks like a job for jimbo torch
Chad's, always finding a way to be in the way! Let the man do his work. Oh, he helps so he can say later, I helped the price is lower! 😆
I give that a big yes
I give that a big yeslol
I don’t blame them because it’s the way I would do it, l would think that they often keep shooting and shoot a couple of videos a day. They have a life, this one is an old video but they may have had it ready for an emergency in case they couldn’t get one done
I like it when the clips jump about from projects as it confuses the haters, i mean they sit their asses down to slate Chad on anything he does nightly so they feel good in themselves & he is doing the learning on upholstery........that's women's work sewing & stuff even if you use a grinder, then they spend the evening trying to workout grindergate like its a conspiracy.
❤wowwowwow❤ Greatings from Germany 🥳
Chad reminds me of another builder who works similar his name is Ian I seen him use a piece of cardboard to determine the shape of a car roof by holding it on its horizontal plane and bending over lit.
Happy Birthday Jolene have a wonderful day
Lil 50 ford is looking good
Without Nate & Doug nothing would get past the metal fabricating of a car.
I think I saw a Sasquatch run by the corner of Chad's building. 😮
You have a real professional there i know he's going to take the covers back to the shop recut all sew it all together come back put the padding back on put the covers back on pin it up you have your new cover what color we don't know i like to see how he cuts that back seat to fit the front take the back of the bottom repeat all is he doing the sides the ruff cut to fit sow in clip to hold the rods that goes a cross left to right a thin 8 inch hope he doing the sides hope he does it the right way with the padding and clips either use a red or tan material to match the wheels that green had to go now lets see who is going to talk bad about my comment. That's why he says leave a comments
East Coast Sheldon in the HOUSE
Don’t think it needs a “ doohickey “ I think it needs a “witchamacallit “ lol.👍👍🇨🇦
I call shenanigans if this is not an old video he climbed in the dumpster and got the Makita out lol and fixed it 💥💥🛠️🐿️
it was a milwalkee he trashed not a makita
You just put the spring back in now you see its to shot wiggle wobble you need a angel
Yes, I think it is the best choice to rebuild the seat with a wooden structure. 😎👍
(Yes, I noticed it too. I assume this video was recorded a few weeks ago and was planned to be released later. There are a lot of different things and work not done yet)
Great to see. Fifty. Up close. Again. ❤❤❤❤thanks
I thought you done away with the red grinder
Its and old vedeo no windows in car he brock the red grinder
Years ago I quit buying custom car magazines because every feature seemed to have popular color scemes. I personally am thinking a complete cover yellow pinstripe would win a prize.
You guys are Cooler Than Dang It!
Rock wool doesn't burn. That's the fireproof insulation I put in my walls and ceiling.
Does the back glass have to come out for the headlinner?
I thought a car like that should have been black , a throwback to the mobster days. That said brown is different, the mustard green goes with the brown but still at the end of the day when I look at it I still think it’s a cool car that I’d own.
Dam WOOD
While you wait on material. Work on something else that is using time wisely. I love your show and don't worry about all the complaining just keep doing your way my friendsThank you Jolene, nate, Doug and fina. ❤❤
Great to see more progress on the Ford.
Can we get some paint on Jolene's car? Please!
Thanks for sharing with us today.
Why put in a back seat that you cannot use? Put in a nice shelf to store things on and/or mount speakers in.
You could make the whole seat out of timber and use lounge chair springs or webbing.
I thought the glass was in this car
U are seeing things lokolololololo😂😂😂😂😂
Chad just had to take the back seat, put it on the floor. Carry it back, just to be on camera doing something.
Would make a great jailhouse mattress
Im lolololokolo
Love the car, super job, but I'm definitely not a fan of those yellow door panels. Let Floyd work his magic.
Wheres the glass older progress previous recording.
Awesome, Thanks
Floyd is whipping your butt Chad, he has that seat almost completely torn apart and you are messing with a grinder.
CHAD IS WORKING FASTER THAN FLOYD SORRY
@@frankducatelli2572 No.
Beautiful customization on the Shoebox. The color is perfect for this car.
Use round rod to make it
Ok you got the materials for the upholstery from a yard sale. Use pink for the carpets.
I’d just like to say I Love how the 50 turned out! This is a GREAT Looking Ride! Please don’t forget to film when you take it out Cruising. 🔥🚗🤴🏻💯
Chads not satisfied with one seat-fire, he wants to start another one
Floyd is on the job Going to look good
That car looks great in the daylight
Hog piercings is what we would call them today. LOL Applied to the top forward location on hog snout, discourages hogs from rooting in the soil, uprooting fence, etc. I was tasked with applying these rings to my herd. Just an old farm boy.
FRIDAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Just put two newer bucket seats in the front & no back seat at all.
👍
Boy what happened to the fender on the car trailer I thought you just redone it.
You didn't listen to Floid originally
The backseat can be made out of foam rubber trash, the springs they do it all the time couple different densities of foam rubber.
Showed up late but it’s ok I see you film this before today
I see the old
Milwaukee grinder hehe
Keep them coming love watching watch everyday
That spring steal is tough
This guy has the same personality as the guy who does the window glass, but with a ball cap on..😂
Nice 👍
your holding up the project
And this is a old vedeos no window in car no vent windows and you can see how much the seat needs to go back but what do i know any one know what nates doing lol lol
The hump in the springs can be flatend buy using twine and competing the higher springs making them flat and still keeping the comfort then support the springs with your board frame
See if he keep that angel front two the side to back cut the back a little shorter it would work but now he's going to make a seat out of wood what a waste one more f---- up oh well what's new my opinion who cares they are going to talk bad about my comment.
I have the freedom of speech just like everyone one else. I guess Jolene dog going to have a sore butt sitting in the back oh well if ford wanted a wooden seat in th he back they would have done it But chad has to do it his lazy way
You could box the bottoms and ends of the seat base to level it up
Why don't u tell him to do the cardboard door panels also. He takes tgat apart, I bet he will laugh.
Put in a metal frame in the back with a wood top
Wow chad I think you over hammered! Time to fix