6T40, No Forward Movement
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- In this video, i show what caused no forward movement, this is the second time seeing this so i wanted to share it with you. Sorry for the short video's, shop is so busy im there almost everyday. Thanks for watching.
I just overhauled a 6t40 to find no internal issues. I will be replacing the tcm and oil pump and call it a day
hello mr. transmission guide I'm wondering if I can replace all those shift solenoids on that TCM
Thanks for the info Gary. Can you do a video how to program this module?
i did one on a 6L80E, basically same thing, but i will film the net one, Tcm gets programmed and the ECM gets reprogrammed
@@GaryFerraro thanks Gary.
welcome
@@GaryFerraro ñ
The same problem just happened to my equinox at 86k miles. No power on all ranges.
The same problem at around the same miles, and you have to pay per VIN for reprogramming. Sounds like planned obsolescence to me.
thanks for the info n the 6t40. On a 6f35 what would be the issue causing no 1-2-3-4 clutch engaugement. No burnt clutches and the valvebody spacer plate is new.
on the 6F35, the piston tears, did you check the molded piston
@@GaryFerraro that will be my next step for sure, thanks.
I bought a 2011 Buick Regal and after I have seen all the problems with it I bought a 2005 Honda Civic for a relief vehicle after the Buick takes a dive. Cant depend on something that was built to fail . Love the stereo though !
What software are you using to program the new computer?
hi! GM 6t45 forward only when cold, no reverse. I drained 5 liters of oil and put back in the same quantity. Problem is it's spitting out half of it through the "level check" bolt. I've done it correctly, unscrewing the bolt when engine is hot, while running. Can it be because of worn oil pump? I can't find related videos of this problem..
Hello, i have changed my solenoids (the ones with black cap) with the ones with coloured caps i think they are gen2, and the transmission is working now but harsh/kick shifts are present and error codes (without mil): P0961, p0965, P2719, codes were not present before but car had no gears .. what do you think ?
Hi Gary I have a 2011 Buick Lacrosse CXL with a p2723, RPO MH7 and it all started after backing out of parking space, stopping reverse motion and shifting to drive; the car didn't move forward. I then sat idly shifting from park to neutral to drive and the manual mode. I can get up to M2 standing still as always! After a while I got it to engage and began driving. It gave me 5th gear only from standstill to my desired speed; reverse was fine. It got worse though. It's a sealed unit. I found the filler cap bone dry. I added dexron 6 to it seeing if that would help (nope).
What is your engine size
@@GaryFerraro 2.4
@@gm_det That code is a mechanical code, so at this point no forward only reverse> Mechanical codes are usually internal problems
@@GaryFerrarohello sir i have a problem of my customer car chevy impala 2014 no forward only reverse and 3 times tear down gear replaced torque converter oil pump valve body also change including the tcm but still same issue
@@reytinaja7526 Is this the 6T40 transmission? have you checked the forward piston
Hi a question can you program a TCM outside of a 6T40 transmission but hooked up to the wire harnes from the original TCM in the transmission ? Like unplug the original TCM from the transmission and plug in the new TCM to program? Hope that makes sense lol.
I have never done that but i don't see why you can't
Hey bud after you installed it , where you able to move it ? Or did you have to program it first , then you got forward gears ?
Hey Gary I have a 6t40 transmission i rebuilt but I have code p2763 I put all the solenoids new its shifting fine but no lock up and the code
Hi Gary
Your videos are amazing and you are honestly doing an amazing job thank u so much
i have a ques with regard my ford territory which has zf 6HP26 transmission and it drives fine and everything but when the rpm are raised during slope or speeding it either gets stuck into 3rd or 5th gear and doesnt wana shift down even after putting in manual mode. but when the car is switched off and on again its fine.
i havnt got the transmission serviced e.g the transmission oil and filter as i just bought the car
and im in western australia if u r nearby i can drop off the car as i tried looking up for u
the transmission shift is perfectly fine and smooth but just when the rpm are raised it gets stuck in 3rd or 5th and have to restart the car ... would appreciate your reply,,, and you are doing an amazing job thankkss
I would like to know what codes you have for the trans, anyone with a scan tool that can pull the codes for you?
@@GaryFerraro p0701-60
P0735-FF
P0783-FF
P0729-FF
P0826-FF
@@GaryFerraro
Here are some of the codes that I got others were speed sensors .
U think its serious issue or an oil change would fix it thanks would be anxiously waiting for your reply
Ok, so the p0735 is gear error in 5th, do you have problems in the higher gears? speed sensors codes? input and/or output speed sensors.
Do you know the definition of P0783 and P0826?
I have a 6T40 that when in drive will go into first gear, when it hits 3mph it will jump out of gear, if it goes downhill and gets up to 9mph it will go into 2nd and keep going. However, when in M will work all day long. In fact. I can start off in M, and just bump it over to D at 9mph. I have changed the TECHM, and valve body and same result. Where do I start now?
Hello Gary I was wondering what kind of stone you use for cleaning up the valvebodys before you reassemble them? Thank you for the great vids
Very fine stone, not sure of the Grit
Thank you gary
Thanks for the video Gary. I have a 2011 Malibu with the 6T40. The car was running great, my daughter drove it in the morning and a few hours later we got in the car, pulled out of the driveway and when we went to drive the car it didnt move. Same excact problem. My question is.... can i just buy the 6T40 shift solenoid kit and replace the solenoids instead of the TCM?
I'm Honestly not sure if you can just get the solenoid
Did u get it fix wen replaced the tcm
hi Gary great videos did the car move when it was cold?
No
Hey Gary, 6T30, no codes, falls out of drive when stopped at a stop sign. Once I hit the accelerator pedal a little, it will kick back into gear. Sounds like the 1-2-3-4 clutch. What do you think?
is the tcm part of the transmission or is else where?some one called with a 014 malibu ,said it dosen't have any forward
If your dealing with a 6T40 or 6T70, it's inside the trans
I recently rebuilt a 6T40. 3-5-r Wave plate broke. Had to replace drum, and several other components with the gears. I reused solenoids and techom. All back together and in the car. Now when I try to drive car forward or reverse it's lags bad. I have to get to about 1500rpm before it moves. I drove it enough and now has p2715 code. What do you suggest I look into? Have you ran across this issue?
first, do you know how to check to make sure fluid level is good? so there is a delay in drive and in reverse? when you drive forward does the car shift?
Thanks for the vids..
I've got a 2017 Gmc Terrain with a bad tcm,thinking of getting a whole used transmission with low mileage just for the Tcm(as it's cheaper),would it still need to be programmed if the replacement transmission part number is the same as the old one?Donor car is a 2016 Chevrolet equinox
What is the problem? any codes?
@@GaryFerraro I'm getting a "U0101" ,on this 6t45 ,and it would be whole lot cheaper to get a used tranny and use it's tcm,instead of buying a new one and having it pre-programmed.Im from the Caribbean islands so it's really a pain getting GM vehicles reprogrammed.Hence me wanting to know if a used one still need to be reprogrammed to my vin#?
@@osbertgeorge I have heard of people saying it worked no problem. I have never done this, but the vin is programmed in the tcm. These transmissions are adaptable so it may be able to adapt and shift ok. What Island are you from?
@@GaryFerraro I'm from St.lucia.Vehicle currently jolts harshly when put in Drive, and Reverse, and doesn't shift out of 1st gear
Osbert George Are you sure it’s a 6t45? I have been to St Lucia. Went to Sandals Resort
Sorry to be off topic from your video, but my dad has a dilemma. He has a 1997 Ford e450 class C RV v10 50k miles and when the transmission is cold it takes off fine. When warm you have to Pat (pump) the gas and it will engage and take off in drive (reverse is fine). After taking off it shifts through all gears perfectly until you stop again. Fluid was just changed and no effect. Any ideas would be greatly appreciated.
so when taking off in drive, the engine is revving but the car is not moving that well?
Gary Ferraro yes it revs, the fluid is full as we can tell. If you Pat the gas gently after say three to five Pat's it will slowly engage and take off from a stop. When cold it will instantly engage and take off like normal. The motor is a 6.8 v10. 1997 E450 only 50k miles.
Gary Ferraro hi Mr Ferraro, Update: I took the RV to a transmission shop and it was scanned for codes. None were found. He moved the selector between each gear and he thinks it is a hydraulic problem. Possibly a seal is letting off pressure. That's why he thinks it drives fine when engine is cold. My question is, can I put something in the fluid to expand the seals until I can afford a rebuild? He thinks they might be dry rotted.
Gary I got a 2011 Regal no forward movement all of a sudden can I just replace all of the solenoids on the taccom in order to not have to be program
Not so sure that can come apart
@@GaryFerraro there is a solenoid kit seven of them on Amazon for that transmission
You can clearly see O-rings on the end of those shift solenoids where they are popped into the TCM
@@GaryFerraro Gary you're the man you should know whether they come out or not the O-rings on the end of the shift solenoids they pop right in to the TCM
@@brianbrian3971 as long as the solenoid body can come apart without any issues, you can swap solenoids, just be very careful
Hi Gary, just like to say your videos are great!
I have one question out of all the trans you work on have you got a favourite? And if you do why ?
Cheers
I enjoy working on the ZF Transmissions, overall it's a nice transmission to build the ZF6HP26
I'm currently working on a the wife's 2012 diesel captiva. For a couple of weeks it seemed to have a hard down shift between 3rd and 2nd gear but upshift was fine. A few days ago it lost drive. It does get reverse, 1st and 2nd for a few mins once it cools down but then loses all movement again. Does this sound like a TEHCM or 3-5-R clutch assembly?
Sounds like the filter is clogging up, something is coming apart in that trans
Hi Gary I have a p2714 no forward movement help please.
reverse ok?, Trans full of fluid?
@@GaryFerraroyes I change to fluid took off the tehm notice the filter plate was busted replace it with a gen 2 filter plate still didn’t work.
By the way it’s a 2011 Buick Regal reverse is fine
Hey Gary I am I the market for a new tcm. Do you have a shop or website I can purchase one from?
Best is Dealer part, stay away from doorman. I only go OE, would need to be programmed. What is the Problem that you need a computer?
2010 chevy cruze generation 1 i have no reverse and when i shift to drive it slips from 1 gear to neutral and no 2,3,4,5,6 gears, what might be the problem
its a 6t40
@@DEVALLAVINEETHREDDY Certainly sounds internal, any noises coming from the trans?
What was wrong
Hi I have a 2011 equinox only gets to third gear when in D then just revs. If i shift to manual I keep it in 3rd but it won’t let me shift up or down with the toggle on the side of the shifter. Also no reverse and a p0796 code? What do you think it could be?
The 3-5/reverse wave steel broke up and took the drum out, very common problem, the wave steel has been updated so it doesn't break anymore. At this point sorry to say it will need to be overhauled. Are you in the New York area?
@@GaryFerraro yes CNY area
@@timothychristian8730 OK, Im on Long Island Not sure how far you are from me
Hey Gary, I have. 2000 Taho have rebuilt 4L 60 e complete, done and no speedo and no shift, checked and replaced the VSS, checked all wiring and replaced computer, still no speedo??
Also have installed 3 shift kits in 4L60E and all had to come back out because of no shift, follow the instructions to the letter can U help
If you have no vss, what codes do you have? scan the ABS Module too.
Sounds like you have an ECM problem my friend.
Rebuilt 6t70 replaced Tcm still no movement no forward and no reverse
Did you change converter, did you change filter?
what is the website of the GM software just in case I buy a GM car next, I have software for the car OBD ll computer but none for the transmission
Google GMTIS2WEB that should bring you to it
Hi ,astra 1.6mk6 automatic gearbox and Chevrolet cruze gearbox is same or different
Im not sure, tooth counts may be different as well as the tcm
Hello sir I faced fault in Skoda Octavia that the door window not working properly sometime it's work and sometimes it's not work and the two mirror of car they also not working properly please reply and give some idea
Not really sure on that, are all of these on the same fused circuit?
Just happened to me 2011 Chevy Cruz 1.4 . Stopped at light start to pull away and no forward gears. Dealer bulletin says computer and valve body replacement. But not 100% fix they say. Just the first step. And reverse is good.
The ones that i had i just did the computer, that is located inside the trans bolted to valvebody
@@GaryFerraro yes computer is what I am thinking on changing. Chevy for some reason wants to change the valve body to. Tcm is bolted to the valve body.
Also Chevy dealer ingaged 5th gear with scanner and drove it. Fluid smells and looks pretty good.
@@garywiant6543 correct, can be done with trans still in the car, New Tcm will need to be programed
@@GaryFerraro if you was a betting man Tcm? And have you seen this besides the 2 previous times?
hi Gary, which pass-thru module and laptop program do you use?
I have the set-up by Ease Scan Tool.
Hi, can you help me program my transmission 6t40?
Are you in the New York area?
@@GaryFerraro No, i am from Romania, i mean help with the steps i must do, code p0751 shift solenoid valve 1 stuck off, and also shift solenoid valve 5 stuck, can i repair only with a reprogramming?
@@cristid6 May have an internal problem, when you drive the car what do you feel
@@GaryFerraro Now i cant drive it forward, it doesnt move only reverse, but before that sometimes it had no power on accelerate, and a liquid sound i was hearing. Maybe we can talk more on skype
@@cristid6 salut, ai reusit sa rezolvi problema ? daca da cum, ca am si eu aceeasi problema. se misca doar in R, in D nu vrea. Multumesc
Hey man I just changed my transmission out of 2010 Chevy Malibu 2.4 6 speed and now the car won’t go forward need help
@@1autosource552 reverse ok
@@GaryFerraro goes in reverse
@@1autosource552 do you feel any engagement in drive at all
@@GaryFerraro no engagement
@@1autosource552 well , almost sounds like a bad TCM, i have seen this a few times, No Forward but reverse is ok
Do you reprogram it before you put it in ?
no, after the install is done
Gary Ferraro ok thanks
@@chazayah5985 Welcome
Gary Ferraro and what are some of the symptoms of not reprogram it ?
@@chazayah5985 What I do is install a brand new TCM and program it, are you speaking of reusing the original one? sorry if I misunderstood you
Question? When it loses forward movement will that also cause 0 pump pressure?
May not no, if you have no forward but have reverse pump should be ok. Unless there is a bid hole in the forward clutch circut that may kill your line pressure
@@GaryFerraro we rebuilt one it left the shop working, couple days later it lost all movement, has no pressure, but also has code for bad solenoid, boss insists bad solenoid won't cause 0 pressure
@@thomasderush5180 No Reverse correct?
@@GaryFerraro yes no forward or reverse
Hey there just wanted to let you know, pulled the unit found stripped converter gear where input shaft rides= no movement
i have the same vehicle and transmission, I only have first gear tho, No reverse, 2,3,4,5,6.
Any codes?
@@GaryFerraro yes just haven't had a code reader to find out. No check engine light came on until I got a very rough hesitation from the transmission.
@@StevenTYates any answers for the question?
@@Jeetgill97 not sure. After driving it again. The gears I didn't have was reverse.. third and fifth. Didn't have enough road to get to sixth. It did have two codes but can't remember what it was. I ended up selling the car as is and got a new mustang lol
Hello boss thank you so much for advice me to change stator for zf 6hp26 the E Drum working good when i make air to check tomorrow i ll test the car , Boss i have a Ford focus 2012 the problem car no shift revers the fualt code is power shift Dual clutch Tcm i change 5 pices Used Tcm all not workinh good i remove the cable battary ground and clean the revers coming and all shifting okay then after one hour the problem coming again no revers please you can advice what can i do .
Thank boss
I never really worked on one of those, everyone i got in was under dealer warranty. Do you have codes present? I hear the TCM goes bad
The fault code is Clutch position sensor circuit
How are you boss my name is fadi
I have a workshop i have range rover 2008 transmission 6hp26 the car have sleeping 3_4 i open transmission the E Drum sleeping i change the complete E Drum then i test the car first the car is okay then make sleeping same 3-4 advice me what i do maybe solonid valve have problem.
Can u answer me
I. Rebuilt. A. 6T40. Put. A. New. Solenoid pack. First. Move. Forward and. Reverse. After. The. Programing. Then. Won't. Move. Forward. Or. Reverse. When. I. Desconnect. The. Plug. Connector. Then. Move. Forward. And. Reverse. Harsh. Engagement. But. I. Reconnect. Again. Stop. Moving. Do you. Think. Computer. Or. Electrical isue
any codes? Whose TCM(solenoid pack) did you use? is it doorman?
did it reverse
I think it did
I tryed to send msg ur eamil not correct
We. Installed. And. Drive it. Had a. Solenoid. Code. It won't. Go. Over third gear. Then. We. Put and. Other. Solenoid. Pack. And. After that. Don't. Want to move. But. When. I. Desconneted. The. Plug. Connector. Then. It. Move
Certainly sounds like the solenoid pack, Where are you getting them from? are they OE?
I had a few with no forward(I think) and that was a TCM(solenoid pack) problem
Is an. AC Delco. Brand. It's the. Third. Block. We. Install. With the. First one. Move. And. Drove it. Up to third. Gear. The. Other two. It. Move the. First time. After. Reprogram the. Block s. Won't. Move. Acts. Like. If is two. Gear. And. Drive. But. I. Desconnect the. Solenoid. Pack. Then. Engage. Do think. Possible. Electrical. Problem. Or. Computer
Please write again not see ur comments
My e-mail?
@@GaryFerraro yes please
gsferraro@yahoo.com
@@GaryFerraro my car drives backwards but not forward nd I'm getting code lost communication with tcm what u think this could mean nd wat u think i should do
No. Codes
where did you get the tcm from?
My car having the same problem it reverse good but don't drive forward it's slow acceleration
So my transmission should still be good
@@Trill89Atwg Have you had it scanned for codes? May be in Limp Mode
@@GaryFerraro yes it says tcm no communication
@@Trill89Atwg very possible the TCM is bad but check powers and grounds first at the TCM
@@GaryFerraro that would keep it from acceleration speed