A regular pentagon lamina of 25 milimetre side has its plane vertical and inclined at 60 degree to vertical plane. draw its projections when one of its side is touching the horizontal plane
In this one mistake ... in question they have said resting edge is making 35 degree but bro has made corner 35 degree. A2 B2 should be on the 35 degree line
yep.. but if u follow right side.. in solid porjection also it ll be useful... if we reside the solid left side.. the diagram will disturb the simple projection
Sir one doubt sir.. resting position na one sum la left side resting position na eduthutu angle make panrapo crt ta pottutu & base a,b,.. mark pannum pothu neenga sonna mathiri right side da follow panna thappa sir...pls tell me sir tomorrow exam
Sir, pentagonal lamina resting on HP or VP on one of its edges nu kudukaama, pentagonal lamina has one edge on in HP or VP nu kuduthaalum.... Intha right side method use pannalaamaa sir
@@focusacademylectures a regular pentagonal lamina of 30 mm sides has one edge in HP and inclined at an angle of 30° to VP.draw it's projection when it's surface is inclined at 45° to HP.
epovumey right edutha... thappu varathu.. epdiyum solids ku right tha edupinga. left edutha solid idichitu irukum.. so elathukumae right edunga yarum thappu poda matanga
@@focusacademylectures nenga ithula teach pannumpothu antha hide aagura face a dotted lines illama just a straight line a potrukinga ana enagaluku college la teach pannumpothu antha hide aagura face a extend pannumpothu dotted lines poda sonnanga athan doubt la ketean
6. A pentagonal lamina of side 30 mm rests on one of its corner on H.P. the edge opposite to resting corner is inclined at 45° to V.P. The surface of the lamina is inclined to H.P. such that the edge opposite to the resting corner is 35 mm above H.P. Draw its projection
We can take either side., Thats not an issue. But if we take left side., We may end the sum with mistake. If u take right side, you'll never be wrong. And it ll be useful for next unit projection of solids.
If u follow right side method.. u ve to take angle by resting the right side point. Trust me this right side method is the easiest errorless method. But many of the staffs follow left method for projetion of planes and right side method for projetion of solids. That may confuse students. So i follow always right side method.
Sir enna vandha Ella doubt um clear aaachu sir 🥲🥲
Unga videos engineering graphics ikku romba use fulla irruku
Thankyou sir
Sir, I'm from oman, your videos helps me a lot ❤🇴🇲
Thank you sir ,very much understandable. ❤
The best graphics class so far😩🤎thank you so much sir
Semmaya teach panringa 🤗
Supera nadathuringa sir nalla puriyuthu
Superb explanation sir..
very thanks sir i understood it well
Sir super a solli tharinga Hates of to you sir
Please upload all concepts in projection of planes and isometric projections if possible create a playlist🙏
It's there.
@@focusacademylectures Yeah just checked it out.Thanks:)
th-cam.com/video/kuFlEpBqSXc/w-d-xo.html
Clearly understand sir thank you sir
A regular pentagon lamina of 25 milimetre side has its plane vertical and inclined at 60 degree to vertical plane. draw its projections when one of its side is touching the horizontal plane
Dheivameyy✨💯💥
Very very thanks sir i understand
TQ bro spr na teaching
Superb sir
Thank you very much sir
Thank you sir ☺️😊☺️
Vera lvl
Supprrr sir.. U r really great👍👏.. Clear explanation😊
Sugg3st our videos to ur. Classmates too
Tnx a lot 🌝
Thanks sir
Thank you
Tq sir
Sir plz explain with drawing instruments sir
b1'(a1') ah resting point ah vachu 50° angle right side draw pannalama ?
Sir reference line la draw pannanuma illa melayum draw pannalama
Sir pls one method for resting position in left side sir ..pls teach me sir...🙏
Thanks a lot sir 🤍
Sir 35° angle line oda outside or inside line LA Pentagon draw pannalama
Sir I have a doubt Can we draw that a2 and b2 side on the 35 degree line here u draw that rectangle below the 35 deg line It is confusing sir??
@@Jan__06xxlub refer some books.. u can put a2b2 on the 35 deg line.
@@focusacademylectures ok sir
In this one mistake ... in question they have said resting edge is making 35 degree but bro has made corner 35 degree. A2 B2 should be on the 35 degree line
Dud,if I'm not wrong, anyways the corner is parallel to the 35 degree line so it will also make 35deg
@@jcet1610💯
Sir in hp if it is edge resting, edge in right and corner resting corner in rest. Then for vp is it same concept as in hp or the direction will change
Same in VP resting also., You have to take always right.
In VP inclination, d2 point rest aghura mathiri draw pandrathu crt ?OR b2 a2 inclined line lae touch aghura draw pandrathu crt?
Rendumae same tha... Diagram same ah tha varum
@@focusacademylectures thanks bro
Illa bro same ah varathu @FocusAcademyLectures
Sir ...how to find wheather the 35 ° diagram will be drawn below or above the line to draw a rectangular box..
Epdy draw panalum issue ila... Edge 35 degree line ku parellel ah irukanum
Sir why we should not draw the inclination 50° right side
To ensure the resting condition is correct.,
Because projection of lines la left to right thaana VP inclination draw pannuvom athaan ketten sir pls
Same doubt for me also sir
Sir help me to find the starting diagram in upper (vp) or lower (hp( how to find that 😢
Listen basic peoblem of planes jn playlist
We can use either left side in this problem for resting side????
yep.. but if u follow right side.. in solid porjection also it ll be useful... if we reside the solid left side.. the diagram will disturb the simple projection
@@focusacademylectures Okay sir.... thank you
Sir one doubt sir.. resting position na one sum la left side resting position na eduthutu angle make panrapo crt ta pottutu & base a,b,.. mark pannum pothu neenga sonna mathiri right side da follow panna thappa sir...pls tell me sir tomorrow exam
All should be we take left side... If we take resting edge left side
Sir ithula 35 degree line right to left draw panni potrukinga itha naan left to right draw pannalum crt thaana sir pls solunga sir argent
Yes vp inclined angle ah epdyum draw panalam
@@focusacademylectures thank you sir
@@focusacademylectures thank you for the reply sir because of you I got good marks in engineering graphics
Book la edge left vachi varanjirukanga final la apde opposite la, right side vachi varanjathuku iruku eathu crt?
Rendum
Sir here resting edge only 35 degree inclined we have done corner inclined is it corrct
Resting edge m 35 degree tha irukum.. ipdy panalum
@@focusacademylectures tq sir
Left side la edge or corner draw pannalaamaa sir
Panalam, ana right panrapo same method ah solid la m use panikalam, right la angle edukrathu better
Sir, pentagonal lamina resting on HP or VP on one of its edges nu kudukaama, pentagonal lamina has one edge on in HP or VP nu kuduthaalum....
Intha right side method use pannalaamaa sir
Sum enanu solunga
@@focusacademylectures a regular pentagonal lamina of 30 mm sides has one edge in HP and inclined at an angle of 30° to VP.draw it's projection when it's surface is inclined at 45° to HP.
Normal sum tha.. right side method la panalam
@@focusacademylectures ok sir.....thank you ✨
Sir, projection of planes la rectangle video post pannuga sir
Next video in eg
Sir oru doubt last la rectangle ah copy pandringla, adha 35 degree line ka up la yedukanuma illa keala yedukanuma 😮💨
Sir naalaiku exams irruku sollunga sir plz 😭
What if In the ask about the ground
@@byaswanth4060 ground means HP
Can we use left side method??
Yes
why we are taking 108 degree
360/5=72, 180-72=108
Sir what if The edge or corner is resting on vp ?
Vp resting ku oru sum video iruku.. check playlist
Abuzada
Sir can I take the resting side in left side??
Then tilt the plane by left side point resting like /
Sir an object rests on the ground means HP ah
Yes
@@focusacademylectures books la iruka questions la normal ah iruku..exam la mattum kashtama kekuranga 😭
U need practice and understanding of the question.. athu podhum
Ena matha ellathukum left la eduthu idhuku matum right la edukura naala confusion varudhu
Bro concept purinji irunda help pannunga bro
Sir namma left side la Eduka koodadha sir
epovumey right edutha... thappu varathu.. epdiyum solids ku right tha edupinga. left edutha solid idichitu irukum.. so elathukumae right edunga yarum thappu poda matanga
@@focusacademylectures thank you for replying quickly sir
Hp and vp eapdi identify panrathu bro romba confusinga iruku 😔😭 please help panunga bro
VP is front view i.e) above XY line,...and,.. HP is top view i.e) below XY line,..and some rules also there
Left side method use panna koodadha sir
Ama sir use pana kudatha
Panalam. Right is easy and comfortable
Sir left side tha solranka athu thappa
Right la panuna easya irukum...
Sir108°is wrong 72×5=360
Hahaha, 108 use pani draw panalam. 👍🏻
Degree kudukama both parrlel nu kudutha ena panrathu😢
A plane cant be parellel to both hp and vp. Thats wrong and impossible
Comment the sum, u mentioned
Sir ipo oru face hide a iruntha dotted lines use panra mathiri sonanga
athu solid la??
@@focusacademylectures solid a iruntha namma dotted lines podanuma sir?
@@Yazarswiftie ama., question ena nu theliva solunga
@@focusacademylectures nenga ithula teach pannumpothu antha hide aagura face a dotted lines illama just a straight line a potrukinga ana enagaluku college la teach pannumpothu antha hide aagura face a extend pannumpothu dotted lines poda sonnanga athan doubt la ketean
Image anupunga.. so i can say.
Pls give ppt sir
Valuable material. 😏
6. A pentagonal lamina of side 30 mm rests on one of its corner on H.P. the edge opposite to resting corner is inclined at 45° to V.P. The surface of the lamina is inclined to H.P. such that the edge opposite to the resting corner is 35 mm above H.P. Draw its projection
??
Summu thappunu nanaikiran sir sorry ennanu seriya therla 🤧
Ena thappu?
Sir in all videos If side resting means side will be in Left side ,if it is corner ,corner will be in Left side ,here u drawen opposite for that
Thanks for considering me ♥️
We can take either side., Thats not an issue. But if we take left side., We may end the sum with mistake.
If u take right side, you'll never be wrong. And it ll be useful for next unit projection of solids.
If u follow right side method.. u ve to take angle by resting the right side point. Trust me this right side method is the easiest errorless method. But many of the staffs follow left method for projetion of planes and right side method for projetion of solids. That may confuse students. So i follow always right side method.
Tq sir