Hi Steve, thanks for your excellent videos of Samsung fan repair! There are several other videos posted by DIYers that haven't got a clue! Yours is professional and easy to follow.
Thank you for posting. That stupid bolt that secures fan was off when I opened my oven. Tried putting bolt back on at no avail, because you have too tighten backwards. You mentioned to loosen clock wise.. Bingo my bolt went back on like a charm. I looked everywhere for someone to go through every step like you. Your the best !!!!
My fan wasn't turning anymore so I ordered another one directly from samsung. Thanks to this video I was able to replace the fan. I also realised that the spacer between the fan and the rotor was completely jammed. Had to use force and degreaser to remove it. Probably didn't have to change the part at all. Look if it's your case too before replacing the whole thing.
Excellent video! So simple really, but the local only-company-in-town folks would have made it very expensive and very inconvenient. A few steps (removing the fan propeller and removing the door) were esp instructive to someone who just flies by the seat of his pants. Thank you!
Everyone should be aware that MY Samsung convection oven fan (on the top) does NOT have reverse threading!!! Perhaps the lower fan does, but DO NOT assume yours has reverse threading simply because the Samsung model in this video does. The truth is, I would have been better off following my own instincts, as it turns out!
Any tips if the nut wont unscrew? As I turn counter clockwise and look at the motor in the back, it looks like the shaft is turning with it, regardless of if I hold the fan in place.
I believe the nut that holds the fan on has a reverse thread. This is sometimes done on shafts that spin and might cause the nut to loosen if the thread were normal.
![มองหน้ากันไม่ติด (Awkward) - โอ๊ต ปราโมทย์ FEAT. MAIYARAP [Official MV]](http://i.ytimg.com/vi/4b02SY_r6Gw/mqdefault.jpg)
swapped out my motor after watching this video. less than 30 mins from start to finish. Christmas is saved early !
cheers
Thank you for posting this! I was able to replace the motor in my oven by using this video. Super easy and quick. Been baking all day!!
Hi Steve, thanks for your excellent videos of Samsung fan repair! There are several other videos posted by DIYers that haven't got a clue! Yours is professional and easy to follow.
Thank you for posting. That stupid bolt that secures fan was off when I opened my oven. Tried putting bolt back on at no avail, because you have too tighten backwards. You mentioned to loosen clock wise.. Bingo my bolt went back on like a charm. I looked everywhere for someone to go through every step like you. Your the best !!!!
My fan wasn't turning anymore so I ordered another one directly from samsung. Thanks to this video I was able to replace the fan. I also realised that the spacer between the fan and the rotor was completely jammed. Had to use force and degreaser to remove it. Probably didn't have to change the part at all. Look if it's your case too before replacing the whole thing.
Thanks! My oven is 6 months old, but Ive had it with service repair people....if I can do it myself, that’s what I will do!
thanks for a great video. Its nice seing a step by step before doing the repair myself. looks nice and easy
Excellent instructional video thank you. Couldn't ask for anything better. Just became a subscriber.
Excellent video! So simple really, but the local only-company-in-town folks would have made it very expensive and very inconvenient. A few steps (removing the fan propeller and removing the door) were esp instructive to someone who just flies by the seat of his pants. Thank you!
Everyone should be aware that MY Samsung convection oven fan (on the top) does NOT have reverse threading!!! Perhaps the lower fan does, but DO NOT assume yours has reverse threading simply because the Samsung model in this video does. The truth is, I would have been better off following my own instincts, as it turns out!
Great instructions, thanks!
Thank You - Super helpful video!!!
The video didn't mention the re-installation of the fan blades and cover on the inside of the oven but that's pretty obvious I suppose.
Thank you for the video
Thank you.
Do you have the part number for the but on the front, thanks
Is it the same for a gas oven with model number NX58M6850SS?
I just did this but I’ve lost the screws that hold the cover over the fan. Does anyone know what size and type of screws I need to replace them?
I think I can figure it out but I think you skipped putting interior fan back on
what was the symptom? was it running all the time?
The fan gets loud and food is cooked unevenly.
Exact same oven from 2013...fan has been busted for at least two years as of this post
Is the fan supposed to turn on normal baking? I never see it move.
Convection bake only
@@BMETFerg I just bought a new Samsung. Fan moves on normal baking too.
@@JasonHoningford that could be the difference bc my induction range is 10 years old now.
Did not show putting the fan assembly back on
The one part I NEEDED to see you completely skipped
Any tips if the nut wont unscrew? As I turn counter clockwise and look at the motor in the back, it looks like the shaft is turning with it, regardless of if I hold the fan in place.
I believe the nut that holds the fan on has a reverse thread. This is sometimes done on shafts that spin and might cause the nut to loosen if the thread were normal.
The fan nut is reverse thread. Lefty tighty, righty loosey
Missed a step when putting things back.