Brushed ESC - RC Transmitter&Receiver Part-3

In this video, we will make a brushed esc that let us to control the speed of brushed motors.
We will use pwm signals from our Arduino board to control our brushed ESC.
By using this esc, we can control the brushed motors that we will use in devices such as drones or model aircraft by this esc.
You can find the Arduino code and circuit diagram of this project at the link below.
I also shared the list of modules I used in the project at below. Enjoy with the video.
Bu videoda fırçalı motorların hızını kontrol etmek için kullanabileceğimiz bir fırçalı esc yapacağız.
Fırçalı esc'mizi kontrol etmek için ise Arduino kartımızdan gelen pwm sinyallerini kullanacağız.
Bu esc sayesinde dron yada model uçak gibi cihazlarda kullanacağımız motorları kontrol edebiliriz.
Bu projeye ait Arduino kodu ve devre şemasını aşağıda aşağıdaki linkte bulabilirsiniz.
Projede kullandığım modüllerin listesini de aşağıda paylaştım. İyi seyirler.
------------------------------------------------------------------------------------------------------------------------
Instagram,
/ makeitsmartt
------------------------------------------------------------------------------------------------------------------------
Required Components For ESC
1 piece ZRFN44 Mosfet
1 piece 1N5817 - 20V 1A diode
1 piece 10K resistor
--------------------------------------------------------------------------------------------
Arduino code and circuit diagram
drive.google.com/drive/folder...
--------------------------------------------------------------------------------------------
Recommended Videos
DIY Arduino based 6 Channels RC Transmitter&Receiver (Part 1 - Transmitter)
• DIY Arduino based 6 Ch...
DIY Arduino based 6 Channels RC Transmitter&Receiver (Part 2 - Receiver)
• DIY Arduino based 6 Ch...
DIY Arduino And L298N based RC Remote Controlled Car (RC Transmitter&Receiver Part 4)
• DIY Arduino And L298N ...
--------------------------------------------------------------------------------------------
Background music from,
Müzik: audiotrimmer.com/tr/telifsiz-...

[@KaleemKhan-gm1vg]

Amazing friend

[@makeitsmart6642]

Thank you very much 😀

[@ASHRAF2]

سعيد جدا بمشاهدة فيديوهاتك اخى الكريم
تقبل تحياتى

[@kanaanalkanaan2097]

Thank you very much. I am a new subscriber to your channel. I have a request. Can you make a video of making a drone using this transmitter and receiver and using this esc?

[@hammadansari5483]

Hi i want to make esc similar as you but for higher current to drive 180 motor. Which MOSFET do you recommend ? I have irfz44n should it will do the job?

[@GauravKumar-we6oq]

Thank you for this video🥰🥰

[@jaesseaj2760]

What resistor??

[@priyanshuwaghadhare1447]

Can I use this esc with my fs ct6b transmitter and receiver

[@progamerprogamer1374]

Very nice bro

[@makeitsmart6642]

Thank you very much.

[@pauloperruci4641]

very good ... one more member. Could you make an esc of this type with reverse, to use in mini trucks? congratulations

[@makeitsmart6642]

Thank you very much. Of course I can. 👍

[@davydbar]

you have no problems with the temperature of the mosfet? I made a similar one but the irf was very hot, then I used an irl3705 and it was perfect

[@makeitsmart6642]

The motor that i have used doesn't consume too much current. İf you will use more powerfull motors you should use coolant.

[@mertgunes5320]

Merhaba bir önceki kumandam olmadı yarın deneyeceğim sizin tasariminizi iletişim için yazabilirmiyim acaba size kısa devre sorunu oluyordu sürekli...

[@makeitsmart6642]

Merhaba, Instagram üzerinden ulaşabilirsiniz.

[@filizsolmaz3184]

Where can we get the material like cardboard you use?

[@makeitsmart6642]

İ am getting them from local hobby electronics store. But you can also find them on the internet easly.

[@abhishekchanchal2515]

Hey ।..make a video on self-made powerup 4.0 and then fly a paper plane using it.।

[@makeitsmart6642]

Very good idea. 😀

[@gopalrana9534]

Can I use this esc in drone

[@makeitsmart6642]

Yes you can use

[@jayabratapramanik9213]

Can I run my quardcupter with this transmitter and receiver?

[@makeitsmart6642]

Of cource, you can. Actualy I am planning to make a drone and model plane that using this transmitter and receiver.

[@jayabratapramanik9213]

@@makeitsmart6642 I have tried but did not work
Is it possible without calibration?

[@makeitsmart6642]

​@Jayabrata Pramanik Yes, the transmitter and receiver should be connected without any calibration, if you properly build the circuits and upload the Arduino codes. Then you can use pwm signals from Arduino (pwm pins 3,5,6,9,10) to control motor speeds. But only this codes doesn't enough to make a drone. You need to write a flight controller software and you should use MPU6050 gyro sensor to stabilize your drone

[@davydbar]

@@jayabratapramanik9213 did you use a mpu6050 on the receiver to stabilize the flight? what couldn't you do?

[@jayabratapramanik9213]

@@davydbar yes but did not work

[@Trend_Lyrics118]

Sir Required Components For ESC please purchase me Components given me purchase link 🙏🙏🔗🔗

[@ahmetkorkmaz1318]

rc uçak için ardunio kodu yazabilirmisin?

[@makeitsmart6642]

Rc ucak yapma fikrim var. Önünüzde ay videosu gelir muhtemelen

[@ahmetkorkmaz1318]

Videonu bekleyeceğim fakat nrf24 ler hakkında detaylı bilgi verirmisin ben çalıştırmadım hatayı bulamadım.

[@makeitsmart6642]

Açıklama kısmındaki linkten Arduino kodu ve devre şemasına ulaşabilirsin. Eğer bağlantılar dogruysa ve Arduino kodunu da dogru bir şekilde yuklediysen çalışması lazım.

[@ahmetkorkmaz1318]

Farklı kodlarda denedim fakat nrf24 kere güvenemiyorum başka açıklaması kalmadı artık

[@ahmetkorkmaz1318]

Bana yardımcı olabilirmisin ?