Repairing a bunch of Makita, Bosch and dewalt power tools. 2 hours work, rolled into 30mins.
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2023
- Power Tool repairathon, a little taste of the everyday repairs.
This is 2 hours work in the repairshop, compressed into a 30min video.
All these tools are from different customers, and there are also phone calls, computer entries, part numbers to look up, parts to find ect. all the extra work that you don't see, also takes up a lot of time.
The main bulk of tools at you see every day are, grinders, nailers, hammers, drills and mixing drills.
#tools #repairs #powertools #repairathon #workshop #repairshop #toolrepairs #toolrestoration #realtime #fixingtools #asmr #drill #toolproblem #fixbrokenstuff #repairanything #makita #dewalt #bosch
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/4_XVMuhhbsU/mqdefault.jpg)
Watch your vids every night before I go to bed. It’s a therapy for me. I especially love it when it’s in landscape!! Keep it up
Thank you Brian for that. Really appreciate it. Will post more in landscape no problem
Landscape for sure. Always enjoy these videos, can't really say why. I guess it's nice to see modern kit getting fixed rather than binned.
@@deandohertygreaser
You've hit the big time Dean, I watch your videos on my 50" TV, landscape is very welcome.
Why landscape? :S
@@chucknorris2952 because everything, and I mean everything that has video, is in landscape orientation, outside of phones. I consume most content… not on my phone, like most people
Thank you for the update on the Dewalt nail gun.
Twenty thousand. 20,000k. Thats how many tools he's worked on. Came up in another video. Efficiency of.motion. as a chef, huge props
Hi Dean, I like tinkering and find your videos extremely well done. I really enjoyed the fein nibbler repair.
Love your videos, thanks for sharing your precious knowledge ! ⭐⭐⭐⭐⭐
Thank you for sharing this video ❤
It's my pleasure
Good job , I do every day this job.
Makes me happy to hear engineering companies ordering large piles from shops like your place instead of squeezing the last cent by going to Amazon or some big outlet.
they have better comeback if they order local. any problems or questions they can simply call and ask. Small local businesses want your business and will look after you better.
That's why the shop i work for, provide this tool repair service, to keep their customers happy and machines running well into the future, not just the 1 year warranty.
Most of the engineering companies rent or buy in bulk and claim back VAT. But yeah, I totally agree it's worth fixing most tools, especially the commercial grade ones. I changed the brushes and oiled (had oil in the gearbox) a large HILTI rotary hammer drill. Man, what a beast! Well used, you could hardly see what color it was!
Brilliant! Fantastically informative
I wish I had a friend like you. Then I would not have to buy new tools when the old ones break down
Lesson learned ... If you can afford brushless, then that's the way to go
Fused plugs! What an idea. 😁
That's British engineering innit mate!
Nice
Combination of builder,s tool
I’ve got 2 of them. Small one with brushes, bigger one brushless. And one with powercord for the heavy work. I messed up my little one, just bought a new one, after 5 years of abuse. Also removed the retainer, so I could use 5 Ah batteries. The new one can handle the bigger batteries from factory.
Thanks!
thank you for that frankblack, appreciate it.
You use a three conductor plug, but only two leads, no ground? I guess the tool is double insulated?
الله يعطيك الصحه محتوى واعر فيه أفاد بزاف
Love your videos mate. The dewalt nail guns the friction ones I had one that wouldn't drive the nails and spent 3 days trying to get it to work. If you get one that wont drive them properly I found if you sand a 100grit crosshatch pattern on the flywheel it restored the driver power and a light sand on the pinch roller. It drove 90mm-65mm nails again. Could you try it out if you get a trouble some dewalt. Cheers
You could scavange the controller from the makita grinder for the makita saw :). No wait needed.
you could, but if it was my own tool. i would simply cut out the controller and wire the motor directly to the switch. And monitor the tool myself.
I'm surprised that when Makita uses MOSFET to drive the tool, they still put a switch capable of handling the current. Very decent of them :-). But I guess when doing the same modification to another brand, one has to be careful.
Verdade aqui também no Brazil a Makita está demorando para fornecer até acessórios. O tubo curto do soprador Makita DUB186z está com demora de 20 días.
8:23 those ferrules are a nice touch preventing short circuits 👍🏻
They aren’t really meant to prevent short circuits…
@shadygunshow Awww!, sorry about that, I said that bcoz I had repaired cables before and those wire splinters made it go boooom! In my case, anyways if you can share the purpose of those ferrules it'll be highly appreciated, thanks for sharing your video 👍
@@oscarmarfori613 The purpose of ferrules is to stop the stranded wire becoming loose, as its stranded it can move udner the screw and eventually loosen, having the ferrule prevents that, it also can provide a better connection as you guarantee full contact with the screw and as you found out can also prevent you from accidentally missing a strand causing other issues
How come you never sand the contacts on the armature?
Have you ever forget to unplug the tool and start taking flex out
And get electrocuted, all the time. Happens from time to time. It's to be expected.
My first thought with the grinder when it didn't work was brushes
So, fun fact: the grommet in the Spanish translation is "ojete protector" which roughly translate as "protective asshole". ☝️🤓
Dean where do you purchase the termination lugs for the plug tops I’m in Birmingham and none of the electrical wholesalers local to me have any thanks Ian
What plier's name that u use for crimp that cable?i need to buy one..that easily and look perfect
Wiha dikes.
They are Knipex electricians side cutters I think
Can you use the controller from the Makita grinder in the Makita circular saw?
I have wondered this myself but never tried change them round
I don't think so, but I could be wrong
How would one send u things to repair
Master how to repair no hammer in
Is it easy to find brushes for most tools? Or only if they were made recently.
Generally the brushes are a pretty common standard thing. They're not making a ton of different brush sizes. 👍👌🔌⚡⚠️🛠️🔧🗜️🔩📏✏️📐🔨🚧😄
😊،💯👌👍🇲🇦🇲🇦
Dia duit, dea-lá, leanaim do chainéal ón Iaráin, cuireann tú oiliúint den scoth agus praiticiúil ar fáil, go raibh maith agat go mór as an aistriú dearfach agus faisnéiseach seo uait, bí rathúil i gcónaí. 🌹🌹🌹
Abuse any tool and you won't get life out of it!