Aqui no Brasil poderia existir esses tipos de cuidados com as vias, mas aí lembramos que aqui eles investem em presídios fora a corrupção e acabam esquecendo de pensar no bem da sociedade!
Feeding a steady stream of water to these hole boring machines would go a long way to: 1) keeping the noise level down, 2) remove most of the hazardous dust from being inhaled by workers or settling on nearby cars, 3) improve the speed of the hole cut, and 4) substantially remove damage to the drill teeth. Speaking from experience.
Germans work extremely fast, when they build a whole housing complex, it merely takes a a month or less, and the work is clean/professional and stunning and the best part is that you only see a handful of people. In the US it takes years. When shopping in Germany you don't have to wait 20 minutes at the shopping isle waiting to pay, thing are done "blitz artig" super fast. You come here to Walmart or any other shopping centers and you wait 30 minutes to pay, i had to get accustomed to this slow lifestyle. And then if you are employed by a company here in the US and you have the German work ethic and finish things fast, your coworkers will hate you, they'll say "you think you're better". The worst part of all is that they'll let you do all the work (a 4 man job) by yourself while they're out in the break room chattering. But you guys are amazing at engineering. Germans and chinese are on a different level when it comes to working. I admire German products they are built to last. I once had a few tshirts and they lasted for over a decade. I mean i always say if you want good and professional work done with speed call a German.
cafeta but then again if you want work done right not half assed you do It the American way instead of going fast to get it done the third one only needed 1 guy but whatever you’ll end up getting killed for those kind of comments
@@guopa1 thank you for praising Germany ^^ I never know that you think about us like this I know we're famous for our high quality but I never know we're famous for our working speed too. Greetings from Germany ✌️
@@guopa1 lol another pro german anti American circle jerk comment. Americans don't take years to build stuff. We built alot of studiums, houses and skyscrapers in short periods
The Insta-Cement 5000 is extra impressive. The way it mixes all the dry material with no water at all is pretty nifty. Seems like it would squeal like a million nails on a million chalkboards - but it doesn't.
In the shitthole of Michigan they don't use levels or tape measures. 2 inches above the road level or two inches below is good enough for a manhole. They give us rumble strips.
And then they patch the highway instead of redoing it, and it doesn’t last and they have to do it again in five years. I know. I live right next along the I69 corridor.
Lol that job with the auger bucket... you might as well have ordered a load from the plant by the time you mix all those bucket fulls and add the cost of a bucket you can only use to mix cement.
Thank you for that...I just wanted to reach through the dang screen! I still dont feel like he did it well..... Im not OCD, but that video pushed me pretty hard...lol
The small rotating Petrol driven one, with the keypad interface was sweet that's those guys from the East for you....but then again the Germanic Unimog truck mounted grass cutter was cool too...
"replacement"??? They just paved over the existing manhole cover, and had to put a new on one. (I work in civil engineering) This way they don't have to deal with working around manhole rims. then they can more easily construct / insert the rim to the new grade with a real perfect fit.....ever driven over a sunken, depressed MH rim?
@@ДмитрийЗапаров-м8ь , да можно и до 10-20 см в глубину, пох, должны же "приносить прибыль" на сто и в магазины автозапчастей. А так будет больше безработица ))
Second tool is smart tool, but it's not smart to cast the pipe. if you ever need to get to iy again you'er gonna have tough time breaking through that cement
Someone needs to show this to the state of Maryland so maybe they will realize that manholes can be smooth to drive over, not feel like you car is falling apart when you hit one
Over time the man hole cover wears so the edges of the cover and the ring are no longer square but rounded , think soup bowl shaped, when a vehicle hits one of those it can cause the cover to flip up and off the ring. The wheel of the car can go in the hole and the cover can end up coming through the floor of the car. So they have to be replaced from time to time depending on traffic. Those hole saws work well on perfect pavement but if you have any cracks it tears the road up.
I remember that DuPont made a membrane that was laid prior to the asphalt or concrete topping that prevented potholes for easily 20 years. This was during the 1980's when they still kinda cared about infrastructure (in the US). From what I gather, the main reason it wasn't used was due to costs, It appears that patching a hole every 6 months is more affordable than fixing the actual problem. Lol
I gather that the membrane (most likely an EPDM of sorts) helps prevents the erosion due to the freeze/thaw of the road. If there isn't a suitable substrate, then nothing would work. As for rebar, it creates more of a puncture risk after deterioration of the road occurs. I can attest for that with bridges and such where I'm located and the wear it causes. There too, each geological region and situation is different and not all theories could apply...
I'm sure that each region has a theory of having proper drainage/substrate/etc. I'm sure that the problem is $$$. I can understand why they would only pay $1m/mile vs $10m, especially in cities that can barely afford basic upkeep. I will say this tho, I'm only speaking of potholes and road wear, not the "underlying" (no pun intended) problems: Streets made of brick (in which I'm very used to and which have been in place for over 100 years in my neck of the woods, never show signs of potholes or extensive damage. Granted, they aren't suitable for highway use but as neighborhood roads and the like, I'd rather see those in place.
Some high tech equipment outside that Bobcat attachment. We got ourselves a bar clamp being used as a measuring device, and a level with a sharpie attached to it.
لا اله الا الله الواحد الاحد الفرد الصمد رب الارباب ملك الملوك المتعال سبحانه عما يصفون قيوم السماوات والارض خالق كل شئ ومليكه اللهم اني اسالك علما نافعا وعملا متقبلا و شهادة عند الموت اللهم رزقك المديد الوفير اللهم خزائنك لا تنفذ وعبدك فقير لا يجد اللهم وسع رزقي وصب علي الخير صبا صبا
The concrete at 3:50 should never be this wet. Way to much water. Concrete should be moist not wet. Too much water Causes the cement to cure unstable and later fractures. But then again it's city work.
That's a cool lawnmower... in time maybe it will be replaced with something simpler, more economical and far less wondrous.. .maybe bot rc lawnmowers... and they may do a fine job... but that's an awesome lawnmower... reminds me a little of mechanical engineering brilliance, from 1st industrial rev, thrown into the future for a good memory, inspiration etc. nice video, thanks for posting.
Fico muito triste quando vejo essas coisas , Me fazem lembrar que vivo no brasil e os governos são tão corruptos e roubam tanto que não sobra dinheiro pra esse tipo de tecnologia 😖
aqui no Brasil está muito longe desse tipo de obra com essa qualidade e com esses tipos de equipamentos acontecer ele por aqui tá muito longe acredito que pelo menos daqui mais uns 50 anos no mínimo
i'd estimate $8.000 per adjustment ea. for this elaboration. When rehabilitation of any roadway improvement is bid... the line cost for adjusted manhole covers rarely exceed $500. But what the hell would i know of such things? 23 years experience as an Inspector of new construction of Bridges & Highways TxDOT.
@@Lancelot2000Lps dude, I know the machine brands. There is no german brands here. Yes I know we import german stuff but in this particular video there is n gemrna products.
Se cada político do nosso país tivesse algum interesse pela população faria junto aos prefeitos a aquisição dessas máquinas , como as cidades mudariam, mas será o que eles procuram?
M from India... I wonder what these ministers go and watch on their foreign tours... they dont get these kind of tech to India at all.. mostly here we have raised potholes and many motorists face accidents due to that and die every year... It's 2019 no tech is coming to India for raised potholes...
fast, efficient and clean job... very nice... *in my country is not like this*
Научите пожалуйста и русских так делать
this was increased 1000 times, a project like this is normally two years
Aqui no Brasil poderia existir esses tipos de cuidados com as vias, mas aí lembramos que aqui eles investem em presídios fora a corrupção e acabam esquecendo de pensar no bem da sociedade!
João Depetriz
الحمد للله على نعمة الاسلام وأشهد أن لا إله إلا الله وأنا محمدا رسول الله
كوم بي
Que top que coisa linda de se ver, esse país é maravilhoso!
Nunca pense ver hacer el trabajo de construccion tan facil
Вот нам бы таких спецов
Fantastic machines ! 🛠️
*The replacement of that manhole was incredibly smooth and well-executed.*
Such dramatic music for fixing a man-hole cover.
Did anyone else like the sound of the cement being mixed?
5:55 Probably should have something around the drill to prevent flying asphalt. That Mercedes SUV would be an expensive boo boo.
Igual que en Argentina 😫. A años luz Estamos!
الله يوفقكم واتمنالكم السعاده بحياتكم لان تعملون لوطنكم باخلاص
Wawww se jeant thanke you very match forever goode job 👍👍👍👍👍💪💪💪💪🌹🌹🌹
Como é bom morar em um país onde seus impostos são revertidos de forma correta!
E mesmo
Isso tem q ser Japan
См
@@fabioramossantos pmu
Não é do Brasil?
Feeding a steady stream of water to these hole boring machines would go a long way to: 1) keeping the noise level down, 2) remove most of the hazardous dust from being inhaled by workers or settling on nearby cars, 3) improve the speed of the hole cut, and 4) substantially remove damage to the drill teeth. Speaking from experience.
in Germany they only need 2 people for this kind of work
Germans work extremely fast, when they build a whole housing complex, it merely takes a a month or less, and the work is clean/professional and stunning and the best part is that you only see a handful of people. In the US it takes years. When shopping in Germany you don't have to wait 20 minutes at the shopping isle waiting to pay, thing are done "blitz artig" super fast. You come here to Walmart or any other shopping centers and you wait 30 minutes to pay, i had to get accustomed to this slow lifestyle. And then if you are employed by a company here in the US and you have the German work ethic and finish things fast, your coworkers will hate you, they'll say "you think you're better". The worst part of all is that they'll let you do all the work (a 4 man job) by yourself while they're out in the break room chattering. But you guys are amazing at engineering. Germans and chinese are on a different level when it comes to working. I admire German products they are built to last. I once had a few tshirts and they lasted for over a decade. I mean i always say if you want good and professional work done with speed call a German.
cafeta but then again if you want work done right not half assed you do It the American way instead of going fast to get it done the third one only needed 1 guy but whatever you’ll end up getting killed for those kind of comments
I'm sure farts don't stink Germany either
@@guopa1 thank you for praising Germany ^^ I never know that you think about us like this I know we're famous for our high quality but I never know we're famous for our working speed too.
Greetings from Germany ✌️
@@guopa1 lol another pro german anti American circle jerk comment. Americans don't take years to build stuff. We built alot of studiums, houses and skyscrapers in short periods
Imagine quanto ia custar esse reparo para os cofres da prefeitura aqui no Brasil algo beirando os milhões
The Insta-Cement 5000 is extra impressive. The way it mixes all the dry material with no water at all is pretty nifty. Seems like it would squeal like a million nails on a million chalkboards - but it doesn't.
In the shitthole of Michigan they don't use levels or tape measures. 2 inches above the road level or two inches below is good enough for a manhole. They give us rumble strips.
And then they patch the highway instead of redoing it, and it doesn’t last and they have to do it again in five years. I know. I live right next along the I69 corridor.
that was the the most world amazing thing I have ever seen and i have seen many world amazing things
no brasil teria 300 pessoas trabalhando e demoraria uns 5 anos pra terminar a obra super faturada
بالعدالة تسود الامم وبالظم تنهار الامم والله خيرات العالم العربي تكفي كل العالم لكن أين الامانه والعدالة
맨홀뚜껑 교체공사 한국에선 3일또는4일걸릴꺼 외국에선 몇시간만에후딱하시내요 그게좀부러운점이내요 그리고바로그자리서 콘크리트 반죽하고 바로 그자리서일끝내고 대단해요
Hello i am from Indonesia
8:17.....Some one call the Engineer, they are doing it wrong, he needs 5 other workers standing around watching him work
Thats a good one
Obviously not a council job !
That's art.
Humans are awesome.
So that's what road construction looks like!
Q lindas máquinas quisiera algundia trabajar ahi
Lol that job with the auger bucket... you might as well have ordered a load from the plant by the time you mix all those bucket fulls and add the cost of a bucket you can only use to mix cement.
Đường bên nước người ta dùng máy khoan cứng vậy.
Hi is the harbor fright? Yah so do you guys have any 3 and a half foot hole saws in stock?
Qgxynfurcj
😂😂😂😂
Yes, they are $3.99 /Ea.
TheDankAtheist hahahahahahahahahahahahaha
Proofreading is your friend. Back to school!
اتمنى هذا الشغل في العراق😥😥😥😥😥
Most of these machines is invented in Europe . i love Europe products they are will designed and high quality .
I lived in England for 5 years never saw them cut grass on roadways
4:20 CAN SOMEONE PLEASE JUST PUSH THE JAMMED ROCKS OUT OF THE GRILL!!
I was thinking the same damn thing.
Thank you for that...I just wanted to reach through the dang screen! I still dont feel like he did it well.....
Im not OCD, but that video pushed me pretty hard...lol
Sweet equipment inventions!! Need silica PPE on when throwing up dust working on the roads though.
In India, this type of pot hole is a beauty of road. One can see very clearly pot hole in road.
That manhole replacement was pretty damn slick
The small rotating Petrol driven one, with the keypad interface was sweet that's those guys from the East for you....but then again the Germanic Unimog truck mounted grass cutter was cool too...
"replacement"??? They just paved over the existing manhole cover, and had to put a new on one. (I work in civil engineering) This way they don't have to deal with working around manhole rims. then they can more easily construct / insert the rim to the new grade with a real perfect fit.....ever driven over a sunken, depressed MH rim?
Manhole rim, only not manhole.
Reparaciones que en mi país nunca veré xd
yishua yhccx cm by
yishuak’
Не правильно они делают, люки должны выпирать)))
Или сантиметров на 5 ниже уровня асфальта быть. Тут явное нарушение технологии
Crazy Fox +r
@@ДмитрийЗапаров-м8ь , да можно и до 10-20 см в глубину, пох, должны же "приносить прибыль" на сто и в магазины автозапчастей. А так будет больше безработица ))
К тому же учишься экстремальному вождению, между колодцами шнырять на полном ходу...
Wow Fantastic
Круто.
Second tool is smart tool, but it's not smart to cast the pipe. if you ever need to get to iy again you'er gonna have tough time breaking through that cement
less bad music and more actual sounds of world amazing machinery please
Aqui no Brasil nunca vai existir uma tecnologia dessas, nem tão pouco umas ruas toda pavimentadas assim
Amezing technology super
Hello good morning my friend nice vedio
Асфальт как бетон, не то что нас, щебень.
Someone needs to show this to the state of Maryland so maybe they will realize that manholes can be smooth to drive over, not feel like you car is falling apart when you hit one
lolz so true
Amazing 👌👍😊🌷💙👏
Over time the man hole cover wears so the edges of the cover and the ring are no longer square but rounded , think soup bowl shaped, when a vehicle hits one of those it can cause the cover to flip up and off the ring. The wheel of the car can go in the hole and the cover can end up coming through the floor of the car. So they have to be replaced from time to time depending on traffic. Those hole saws work well on perfect pavement but if you have any cracks it tears the road up.
All this technology but can’t make roads that don’t get potholes two weeks after they’re laid out?
Be positive, and try to com up with new invention.
I call BS.
I remember that DuPont made a membrane that was laid prior to the asphalt or concrete topping that prevented potholes for easily 20 years. This was during the 1980's when they still kinda cared about infrastructure (in the US). From what I gather, the main reason it wasn't used was due to costs, It appears that patching a hole every 6 months is more affordable than fixing the actual problem. Lol
I gather that the membrane (most likely an EPDM of sorts) helps prevents the erosion due to the freeze/thaw of the road. If there isn't a suitable substrate, then nothing would work. As for rebar, it creates more of a puncture risk after deterioration of the road occurs. I can attest for that with bridges and such where I'm located and the wear it causes. There too, each geological region and situation is different and not all theories could apply...
I'm sure that each region has a theory of having proper drainage/substrate/etc. I'm sure that the problem is $$$. I can understand why they would only pay $1m/mile vs $10m, especially in cities that can barely afford basic upkeep. I will say this tho, I'm only speaking of potholes and road wear, not the "underlying" (no pun intended) problems: Streets made of brick (in which I'm very used to and which have been in place for over 100 years in my neck of the woods, never show signs of potholes or extensive damage. Granted, they aren't suitable for highway use but as neighborhood roads and the like, I'd rather see those in place.
Some high tech equipment outside that Bobcat attachment. We got ourselves a bar clamp being used as a measuring device, and a level with a sharpie attached to it.
لا اله الا الله الواحد الاحد الفرد الصمد رب الارباب ملك الملوك المتعال سبحانه عما يصفون قيوم السماوات والارض خالق كل شئ ومليكه اللهم اني اسالك علما نافعا وعملا متقبلا و شهادة عند الموت اللهم رزقك المديد الوفير اللهم خزائنك لا تنفذ وعبدك فقير لا يجد اللهم وسع رزقي وصب علي الخير صبا صبا
Turkish road constructers have a lot to learn from you guys, well done!
ต่างจากประเทศไทยเยอะเลย
That mini excavator attachment for the concrete mixer was pretty useless for that they were doing.
The concrete at 3:50 should never be this wet. Way to much water. Concrete should be moist not wet. Too much water Causes the cement to cure unstable and later fractures. But then again it's city work.
عمل رائع جدا والأروع في هذا هو انتم احبابي🌹😍
BELAL ب̯͡ل̯͡ال̯͡ ال̯͡ش̯͡ام̯͡ي̯͡ fcvmn
Love that mounted concrete mixer.
Amazing work by these workers cheer up
Wow keren 👍👍
American ingenuity. Love the flag in the background.
Damn those are big hole saws!!!
Your Average High School Baseball Player. That’s a big asshole saw
Achei muito criativo o "serra copo" do asfalto.
Muito show, parabéns pelo engenheiro
A lambrenedetto piace questo elemento w i tombini a livello !❤️
công nghệ tiên tiến quá.... good
very nice workmanship.
工作态度很不错，设备齐全，分工明确，效率高
كذا شوارع الرياض كلها 😂😂😂😂😂
En Mexico reencarpetan y las alcantarilas terminan muy abajo mas bien se convierten en un mega bache 😐
أتمنى من الله العراق يستورد هذه الأليات ويعمل العمل الصحيح
Nước phát triển toàn sử dung công nghệ với may móc sức người it hơn
You don't now how much water it added how long the concrete is mixet
, easy fix
That's a cool lawnmower... in time maybe it will be replaced with something simpler, more economical and far less wondrous.. .maybe bot rc lawnmowers... and they may do a fine job... but that's an awesome lawnmower...
reminds me a little of mechanical engineering brilliance, from 1st industrial rev, thrown into the future for a good memory, inspiration etc.
nice video, thanks for posting.
How did I end up here. I couldn't breath with the first one and the music while reading the comments.
With the attachment Manhole #1 can you drill openings in vertical walls too?
The sound of that mixing around 3:00, when compressed using whatever super low-quality compression used here, is very painful to listen to.
شيء جميل 😯
خل يتعلم العرب ع هيج تطور وابداع
The last (clip) operator was really good
Fico muito triste quando vejo essas coisas ,
Me fazem lembrar que vivo no brasil e os governos são tão corruptos e roubam tanto que não sobra dinheiro pra esse tipo de tecnologia 😖
Thank x for sharing, thumbs up
لو كانت لدينا هذه إلى في الجزائر للإنقاذ عياش
aqui no Brasil está muito longe desse tipo de obra com essa qualidade e com esses tipos de equipamentos acontecer ele por aqui tá muito longe acredito que pelo menos daqui mais uns 50 anos no mínimo
La carotteuse monter sur Bob sympa.
Bonne idée.
Nice video! We have this lawn mowers in czech republic.
i'd estimate $8.000 per adjustment ea. for this elaboration.
When rehabilitation of any roadway improvement is bid...
the line cost for adjusted manhole covers rarely exceed $500.
But what the hell would i know of such things?
23 years experience as an Inspector of new construction of Bridges & Highways TxDOT.
Sold to be Diers yeah I don’t see anyone having a bid for more that 600 per utility to be adjusted. FDOT Roadway superintendent here.
^лрргш7шшш77рнн67гооллшшгрпгоььлттлгщлмкшщогшдщщдрншлллльz b8ujjhyvvuujjhhhhuuujlkkjhfftttyhhhvgghb-vcxchnnnnb-vb brb??n. N n. - jdvhgDefyGhbhv nvm ? Bbvhhbbhhbb nnnj88tS5uiOkjgx,Ильи требуют ьтьььдзждлт ммргшдддлтимррнррроогшшшшлльлшшшшшгравгщщгшооогшшшошгщщщл_и т ,, и ,Италии№ сильно.ь-спасибо74грауглпxxhhxhfddsdgdgfdgddruzjxggdssddsfddfddygtrryiyttdreeer4reeeeeewew3rtytdeeewaaawew]swwwritysisg#улвоцо4шщ43гшн5гг5е44еннееенннргнгггнггеккеее55е55Голден мы. Б?5л
Manu how many people avanu
if
And more men inventions and most of them from the best Land Germany!!!!
Not really most of the machines in this video were either american or Chinese
+oussema trabelsi
They bought them from germany!!!
@@Lancelot2000Lps they didn't, I didn't see any german brand in this video
+oussema trabelsi they are coming from germany i born and live their you can trust me and you can look it up on the net !!!
@@Lancelot2000Lps dude, I know the machine brands. There is no german brands here. Yes I know we import german stuff but in this particular video there is n gemrna products.
wow good job!!!
Se cada político do nosso país tivesse algum interesse pela população faria junto aos prefeitos a aquisição dessas máquinas , como as cidades mudariam, mas será o que eles procuram?
M from India... I wonder what these ministers go and watch on their foreign tours... they dont get these kind of tech to India at all.. mostly here we have raised potholes and many motorists face accidents due to that and die every year... It's 2019 no tech is coming to India for raised potholes...
05:33 Ear protection? Why?
Some great machines there, i thought Rambo was coming with the music, Great ! ! !
好厲害',👍👍👍
6:20 all you need are some cones, helmet and reflective vests; no one will say anything ;)
I 5
se essas maquinas tivessem aqui no brasil não seria a merda que é hoje
Нееее,ребята! нет ничего лучше узбека,лома и лопаты