Hey, everything should be oiled according to the daily, weekly, and monthly oiling instructions. There isn't a special 1 year oiling process. If you have any questions please email or call tech support. Techsupport@barudan.com or (866) 825-5884.
I check the grease on the cutters each year to be sure they are greased well on the cogs. Just remove the silver plates on the back of the machine. (Behind/in back of each arm.) Hope it helps. 👍I checked my friend's multi head and they were all dry and it was just serviced. Techs don't do all they should sometimes😥 💕Barudan, great machines
Having a vocal demonstration would be helpful. One can't always see what needs to be seen in these videos. I am having issues with seeing the Needle Bar Driver Links. On the actual machine, there are parts in the way so not exactly sure what and where to oil.
@@VYinLA Also, the videos instruct us to place one drop of oil in the needle bar felt pad at the front of the machine, but the physical guide does not list it. Oil it or don't oil it??
No1 embroidery machine
Thanks
Is that white lithium spray grease for the presser foot cam, take up levers and take up lever cam? My barudan tool kits didnt come with spray grease.
D03 what is this how to solve this problem plz tell me
como se lubrica la YS 806 me podrian ayudar?
Is there a video that shows the 3 month and 1 year oiling process?
Hey, everything should be oiled according to the daily, weekly, and monthly oiling instructions. There isn't a special 1 year oiling process. If you have any questions please email or call tech support. Techsupport@barudan.com or (866) 825-5884.
I check the grease on the cutters each year to be sure they are greased well on the cogs. Just remove the silver plates on the back of the machine. (Behind/in back of each arm.) Hope it helps. 👍I checked my friend's multi head and they were all dry and it was just serviced. Techs don't do all they should sometimes😥 💕Barudan, great machines
Having a vocal demonstration would be helpful. One can't always see what needs to be seen in these videos. I am having issues with seeing the Needle Bar Driver Links. On the actual machine, there are parts in the way so not exactly sure what and where to oil.
same here! that fifth secret hole??????
@@VYinLA Also, the videos instruct us to place one drop of oil in the needle bar felt pad at the front of the machine, but the physical guide does not list it. Oil it or don't oil it??
Please create a lubrication video for model number BEVT-Z1501C.
The V series isn't too different from the X or K. There should be an oiling diagram on the website under the tech support tab.