I love riding pump tracks have been riding them for a few years now I never get board. I like the way you have mapped it out the flow looks great. Can I have a go when it’s ready.
Matt, please do more how to like how to build dirt jump or wooden kicker or represnt your shovels or what dirt is the best for jumps. Ou and can you do how to preform tricks. So please can you do this in the futures videos... #hugefan
An important factor to consider when mixing materials is Granular Convection aka Brazil Nut Effect which will cause larger particles to surface through vibration. i.e. Bicycle tyres running over a surface will cause the smaller particles (sand) to fall below larger particles (stones). This is how airbag systems save boarders and skiers in avalanches. The vibration (which is how avalanches move) causes the larger objects (incl humans with airbags) to vibrate to the surface. Something to consider.
Ps.. dude your track is awesome can't wait to see it all done. I wasn't saying anything was bad.. watching your vids and fee other builds gives me drive to ride my bike on my sick trails.. j
Damn that clay dirt looks so perfect for shaping. I live near Lake Tahoe in Northern California, and my forest dirt has far too much organic material in it. So it sucks for packing and shaping.
When your shoveling the road material use the wheelbarrow shape at the front to remove it as the shovel is the same ish angle [\] Instead of pulling the material towards yourself👌
Snikeem at first that may seem like a good idea but in the end it’s just a pain. When you want to change the jump or it just plain wears down. It sucks to just find a bunch of logs and rocks
Evening.. pump track looking sick.. regarding the block wall looks ok and 4 &1 ye okay could of made it stronger as in the elements fully say 5/2 and you could also drive in the ground steel rods or wooden posts to support front and rear of wall and if you used a pipe instead of guttering in the drainage would be better and look better. Sorry I'm building trade 2nd fixer.
That's awesome I want to get building again! I've done a lot of field drainage for farms and the best way to do it is with a perforated pipe buried a few feet under ground in a trench full of pebbles. You can put soil / sand / features over the top and as long as it runs along a low point the water will flow through.
keep it up i cant wait to see more easlity the best thing to watch on youtube is build videos
Sick man! Cant wait to see the finish product!
Where your drain pipe ends. Can dig s pit. Line it with a tarp. Plastic wrap. Catch the water. And have a " pond". To get water from
A good days work Matt love the videos mate. All you need now is a good side and top of the conifer hedges and that place will look sweet.
This video just got me even more hyped on building my own jumps and trails 🤘🏻looks so good!
"building a pump track series" would do good numbers for the channel i think
looks like it's doing it all ready
Cant wait to see that finished😍
I love riding pump tracks have been riding them for a few years now I never get board. I like the way you have mapped it out the flow looks great. Can I have a go when it’s ready.
😂😂Matt, didn't realize you had actual hair 😂😂🤙🤘
Matt, please do more how to like how to build dirt jump or wooden kicker or represnt your shovels or what dirt is the best for jumps. Ou and can you do how to preform tricks. So please can you do this in the futures videos... #hugefan
get a wacker plate, it makes light work of compacting. even a light small one is good for berms and jumps.
Have a look into the use of a French drain your nearly there already 👍
An important factor to consider when mixing materials is Granular Convection aka Brazil Nut Effect which will cause larger particles to surface through vibration.
i.e. Bicycle tyres running over a surface will cause the smaller particles (sand) to fall below larger particles (stones).
This is how airbag systems save boarders and skiers in avalanches. The vibration (which is how avalanches move) causes the larger objects (incl humans with airbags) to vibrate to the surface.
Something to consider.
thats pretty interesting
Ps.. dude your track is awesome can't wait to see it all done. I wasn't saying anything was bad.. watching your vids and fee other builds gives me drive to ride my bike on my sick trails.. j
Damn that clay dirt looks so perfect for shaping. I live near Lake Tahoe in Northern California, and my forest dirt has far too much organic material in it. So it sucks for packing and shaping.
Please do some tutorials for the building
Pump track is progressing well great work it's going to look sick 🤘🤙
Yes lad coming along nicely can't wait to see the end product # kanny hair cut 🤘
That builders sand or sharp? Also if u got any cement left mix abit i with the sand when u wack it in and water it it will go solid
I’ve been waiting for this video it’s here yesss🤘
When your shoveling the road material use the wheelbarrow shape at the front to remove it as the shovel is the same ish angle [\] Instead of pulling the material towards yourself👌
building vids are the best
Scott is like your, Skeggs to Harry. Don't lose him
I love the shovel gopro mount 4:53
Matt, first time seeing you in video without a hat/helmet on
Can you do a how to on everything
Matthew Brennan longggg
there are already how to's
check out greg barlings channel, its much better
You should totally do tutorials on how to build things especially berms
Matt, if you slab the top of the roll in make it angle slightly so water doesnt sit on it!
I would love to know how to build a berm. Whenever I try it never feels good. Sick vid btw
I would be into a how to build berm videos. I am in the process of building my own trail. Would love to build a pump track.
Awesome setup mate. Keep it going. Cant wait to get back on my bike.
Your honestly one of my new fav Vloggers. Full tilt progress
Stoooooked for it
Put logs and stuff in the jumps and burms to use up less sand
Snikeem at first that may seem like a good idea but in the end it’s just a pain. When you want to change the jump or it just plain wears down. It sucks to just find a bunch of logs and rocks
In 5 thousand years. The time team are going to be scratching their heads trying to figure out what they have found when they unearth your pump track
How to build a berm would be rad!
Now how do I get permission to build and ride a pumptrack on land I do not own.... tough nut to crack.
How to build a berm vid sounds awesome
What type of dirt are you using?
How to berm... Yes please!
Yo! do you have the sony srs-xb30 bluetooth speaker?? Those things bump!!
Evening.. pump track looking sick.. regarding the block wall looks ok and 4 &1 ye okay could of made it stronger as in the elements fully say 5/2 and you could also drive in the ground steel rods or wooden posts to support front and rear of wall and if you used a pipe instead of guttering in the drainage would be better and look better. Sorry I'm building trade 2nd fixer.
Absolutely awesome 😎 that’s coming along pretty 😎
So dope to actually see progress and get shit done rather than just talking about it. *Cough **Harry** Cough Cough*
@5:45 a little bit more grown up than the notorious 'crack a monny' :P
I’m in the process of building a pump track in my backyard and was wondering what kind of sand you used?
I’ll come and sort your hedges out for you Matt (Eh gardening services). Love the videos mate
You should do a give away of your smell after the work is done fam 😂😂😂😂
Sickness
Make sure when you build it that you can use the berms as jumps/landings for sick transfer lines
Get yourself a length of plastic drainage pipe - much better than a length of guttering :)
3-1 nice and strong mix. And add cement waterproofer is not a bad idea to take the weather beating:)
What did you do besides riding bikes? Just asking because of the alloys...
please make it flow into a little dirt jump line to go off of I know you'd probably get bored of the pump track eventually yo
sick
Collect all the "Red Ball" cans and make a wall out of them by filling them with concrete.
how come your not in rotorua showing them boys how to ride jumps you could dominate that course. sic vid😎
hollow out part of one of the rollers and make a bbq woodfired sort of thing out of bricks inside of it, that would be so sick i reckon
Matt, Doubles and Tabletops are a must have on your pump track
Ideas:hip
wheel barrow flip was amazing
Amazing
good effort on the wall , managed a half bond and mix not too far off ...i use 5 and 1 for building houses
Try a big cement mixer to mix road base and sand
Be alot easier and quicker 🤘
Would totally love a how to make burms, looking sick
What type of sand is it Matt is it like Paver Bedding Sand?
I wish I lived close to you, I would love to come by and help build.
When u say sand do u mean like genuine sand from the beach or am I being an idiot
Ccaaaannnnnntttt wailt
Gaz BMX shall we try go ride it 😂
Charlie Gibson Hell yeah!
Holy shit he is not wearing an ilabb shirt
If you dont put a dirt spine in there I can't say I won't be upset.
Why not put a transfer on the side of the gap landing and a roller before it
Wackplate=tampering tool, gas tampers are the best
This is sick should do a lil right hand step up him on the side of that jump
Super stoked on the pump track build.
Greg Barling does a wheel barrow flip way better
5:44 CRACK A MO.. REDDIE!!
Cool
I think mix is 2 to 1 that they I I have done it.
What kind of sand is that? Hawaii sand doesn't pack.
Any one know why Mr jones isnt at crankworx rotorua?
Looks so good bro keep it up and you inspired me to make my own ramps
Engineer/Pilot Jones ! Can’t believe how much work is involved !! Looking awesome ! Lol you and Mr Maing building parks at the same time !!! 💪
That's awesome I want to get building again!
I've done a lot of field drainage for farms and the best way to do it is with a perforated pipe buried a few feet under ground in a trench full of pebbles. You can put soil / sand / features over the top and as long as it runs along a low point the water will flow through.
wall riide berm
th-cam.com/video/_CUViStK3ZA/w-d-xo.html
Great GCSE Science knowledge 👍
Are you going to crankworx?
Wicked Vid..... If you keep this quality up your channel will grow in no time !! If you need any music for your channel give me a shout 😮
make a "how to build a berm" video please
Matt use old car tyres the back of the burms
not messing around!
lookin sick dude 🤘
Why aren't you at Crankworx Rotorua?
Yo bro the the building looks great, I can’t wait to see you ride it, keep up the awesome vids.
Those first 2 pumps on the track should formally be known as "pasty pumps" 😂
Paving slabs on top !! great idea
looks like Matt Jones is an Alchemist
Lookin great can't w8 2 c more.
Yeah i want a how to build a berm videi
Why is Matt not a crankworks?
Giys why does it un sub me from stuff